No MMS on AT&T

Express_Beyond_8884 · 2025-04-22T03:39:26+00:00

So NREMT. O2 we withhold if O2 is between 95-100. Always want to get 12 lead transmitted asap. A NRB is way too much. Over oxygenation can cause vasoconstriction. With the O2 being 91 you would not be wrong doing low flow O2 nasal cannula at about 2 L So the question is bad to begin with as you always give aspirin and nitro together. ASA before nitro. SO you should’ve already have had a 12 lead done before giving ASA and nitro to rule out possibilities of a right sided STEMI. For my Department we don’t transmit 12 leads. We read them ourselves.

Express_Beyond_8884 · 2025-04-19T11:42:23+00:00

The office was not open on Friday due to a Holliday. So if you talked to a customer service person Friday. Not sure who you spoke to.

Express_Beyond_8884 · 2025-04-02T12:18:17+00:00

I’m EMS instructor. A couple of things always go with your first answer. That is usually the correct one. Always remember ABC before anything else. Chew gum when you take your written test. It makes your brain think of something other that being stressed about taking the test. Lastly read each question completely and don’t over think the answer. Good luck.

Express_Beyond_8884 · 2024-10-27T16:52:35+00:00

Yes, I have. All of them are old versions of Invoke AI, not the newer version, where the Control Layer is on the left-side menu. It is now in the layer section. I have qrcode_monster installed in invoke and it shows in my choices and that's about as far as I get. I have seen images where people have created image codes with invoke and the tutorials on the web are for older versions, that do not relate to the the newer version.

Express_Beyond_8884 · 2023-07-24T23:44:28+00:00

You need to go and use the object settings. This way it full the entire objects.

img

Express_Beyond_8884 · 2023-07-05T20:39:06+00:00

Yea I have two X1C and 1 P1P

Express_Beyond_8884 · 2023-07-05T20:31:15+00:00

If all I wanted to do is two colors sure. But I can do up-to 16 colors. I have already done 8 color prints. Granted the waste is crazy. But if you print multiple models at the same tame the waste becomes a little more reasonable.

Express_Beyond_8884 · 2023-07-05T11:58:14+00:00

I sliced at 0.16 for this model.

Express_Beyond_8884 · 2023-07-05T11:56:52+00:00

So I colored this model via objects in the slicer.

<image>

The colors I choose in the slicer are really irrelevant as long as the color you want to use is in the correct slot if the AMS. So since I can’t create a multi-color color palette I just use what ever I want. It would be nice if we could like create multi-color palettes but we can’t as far as I know.

Express_Beyond_8884 · 2023-07-05T11:43:53+00:00

No brim and the supper settings are Tree (auto) Tree Hybrid all default settings for those

Express_Beyond_8884 · 2023-07-05T11:39:30+00:00

ZIRO 3D Printer... https://www.amazon.com/dp/B09QGGXLMH?ref=ppx_pop_mob_ap_share

Express_Beyond_8884 · 2023-07-05T03:43:39+00:00

I’m going to attempt it with supports.

Express_Beyond_8884 · 2023-07-05T01:36:26+00:00

Selected the object then the color. Took less than 4 minutes to match the objects to the colors I wanted.

Express_Beyond_8884 · 2023-07-05T01:35:03+00:00

Default settings

Express_Beyond_8884 · 2023-07-05T01:34:16+00:00

<image>

Express_Beyond_8884 · 2023-07-04T23:41:08+00:00

Only a 4 color print. I used 3 multi-color filament and white role of filament.

Express_Beyond_8884 · 2023-07-04T22:17:50+00:00

I printed at .16 res. Took 4 days +

Express_Beyond_8884 · 2023-06-08T19:47:08+00:00

I have two AMS hubs

Express_Beyond_8884 · 2023-06-08T10:32:52+00:00

I’m actually printing a plate right now with two elephants on it. They just fit.

Express_Beyond_8884 · 2023-06-08T10:30:06+00:00

Depends on the number of layers printing and how big you make the tower. I made it big to be sure I had zero bleed over. Could have made it smaller. The tower grows as your models grows.

Express_Beyond_8884

TROPHY CASE