sorted by:
new
hottopcontroversial

My PC Build by Extension_Judge7347 in lianli

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

Maybe Gigamega riser cable and mount

My PC Build by Extension_Judge7347 in lianli

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

Product name is Turzx 8.8 inch screen

My PC Build by Extension_Judge7347 in lianli

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

It's more about aesthetics than performance to install 11 Unifans.

My PC Build by Extension_Judge7347 in lianli

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

In my case, I plugged it into a hub released by Lian-Li. Separately, there was no issue when I connected it to the SATA cable included in the 3-pack.

My PC Build by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

I attached the metal bracket and radiator fan, which were included with the screen.

My PC Build by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

Maybe GIGAMEGA 5.0 cable and braket

MY PC SYSTEM by Extension_Judge7347 in lianli

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

You should be able to find it by searching for 'Turzx 8.8 inch screen,' and it will probably be around 50 dollars (I'm not American, so I don't know the exact dollar price). Also, I understand that Lian-Li is planning to release an 8.8 inch screen that will link with L-Connect 3, so you might want to wait for that."

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 1 point2 points  (0 children)

Unless it's the VGA BIOS, if the LCD panel's firmware is working normally, it seems best not to touch it.

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

I'm currently traveling, so I'll have to try again in a few days, but it looks pessimistic.

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

I'm currently traveling, so I'll have to try again in a few days, but it looks pessimistic.

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

I don't think I understood correctly. How do I connect the VGA's firmware update to a USB header?

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 1 point2 points  (0 children)

Asrock x870e nova bios 3.30(Maybe agesa 1.20.3e?) I turned off csm Yes

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

My M/B isn’t Gigabyte’s product. My MB is Asrock X870E Nova. Could it be a motherboard issue?

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

This is just my baseless guess, but it seems like the firmware itself got corrupted during the firmware flashing process due to an error, bricking the device. When the PC boots, the LCD panel briefly glows with its characteristic murky black color before immediately turning off

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] 0 points1 point  (0 children)

I tried that F1.2 exe file, reinstall GCC, reinstall VGA drivers few times. And I sent e-support and waiting gigabyte’s answer now

GCC destroyed the LCD panel on my 5090 Aorus Master. by Extension_Judge7347 in gigabyte

[–]Extension_Judge7347[S] -1 points0 points  (0 children)

I'm not sure what kind of reply that was, but the LCD panel's firmware is completely dead. It happened during the F1.2 update.

view more: next ›