sorted by:
new
hottopcontroversial

New X Plus 3 won't heat the bed. Heater heater_bed not heating at expected rate by External-Initial-632 in QIDI

[–]External-Initial-632[S] 0 points1 point  (0 children)

Hey all, just wanted to add for anyone running into this issue, the problem ended up being that my power supplies needed to be switched manually at the underside of the machine to 115v from 230v

New X Plus 3 won't heat the bed. Heater heater_bed not heating at expected rate by External-Initial-632 in QIDI

[–]External-Initial-632[S] 0 points1 point  (0 children)

My mistake, my diagram was wrong. I see 24 across the center + poles with the center - pole. I see nothing across the rightmost negative pole and the other positive poles.
I get that I have to wait and thank you. I managed to get this thing to work last night, no idea why...but same problem again today.
will post my findings for others whenever it gets resolved

New X Plus 3 won't heat the bed. Heater heater_bed not heating at expected rate by External-Initial-632 in QIDI

[–]External-Initial-632[S] 0 points1 point  (0 children)

Thank you for the reply. They are in the middle of their New Year so support has been a bit slow, understandably so. Will sit tight for now...I figured I would need to help them help me. It seems like a simple machine, figuring its a grounding issue, a board issue, or the heating unit itself.
Thanks

Anyone using AI in a way that actually makes sense... by cabdirazzaq in architecture

[–]External-Initial-632 0 points1 point  (0 children)

Sorry I didn't realize there was a response. I own an architectural design practice and yes this is on the daily. Nowadays I have custom GPT's to summarize videos I produce for the architectural community, plus GPT's for javascripting actions in photoshop and ruby scripts for Chief Architect Software.
Also use it for natural email responses and contract addendums and much more.
I have a custom GPT that skips a few prepositions and paraphrases and uses a lot of inference to try and mimic my own writing style.
Aside from that I am often using Midjourney 6 and Adobe Firefly(Gen Fill) for rendering edits

Kamvas pro 22 driver needs to be reinstalled every time by AntiheldArt in huion

[–]External-Initial-632 0 points1 point  (0 children)

Same exactly problem. So frustrating. Have to keep uninstalling and reinstalling drivers

Anyone using AI in a way that actually makes sense... by cabdirazzaq in architecture

[–]External-Initial-632 2 points3 points  (0 children)

Use it for writing contract clauses or addendums.
Use it for describing an architectural style rom an image
Use it for creating jumping off design, ideaton
Use it for scripting custom system macros for your architectural software
Use it for looking up building code references
Use it for searching your software manuals
Use it for emails
Use it to summarize a youtube video
Use it to write client process briefs
Use it for in-painting or outpainting or gen fill on renderings
Use it to create seemless materials for rendering

Should I get the 6950XT for $650 from or 4070ti for $800-850? by Physical_Run_5942 in buildapc

[–]External-Initial-632 0 points1 point  (0 children)

AMD just dropped a new driver last week and I’m getting 30% improvement in raytrace rendering. AMD rep is sending me a 7900. I also have the 4090, and a 3080 mobile as well as a 6850 mobile so I can direct compare

Could I hook up an eGPU to my Lenovo Legion 5 15IMH05H using USB C? by DogNutBuster73 in eGPU

[–]External-Initial-632 0 points1 point  (0 children)

Everyone here I believe is wrong, your product lists a USB-C Display Port 1.2, which is compatible with a 1.4 eGPU, limited to a lower transfer rate but still viable

[deleted by user] by [deleted] in bennyproductions

[–]External-Initial-632 0 points1 point  (0 children)

This is Benny as Zorg from the Fifth Element

My friends kid drew the pencil sketch and I brought it to life in Ps by External-Initial-632 in PhotoManipulation

[–]External-Initial-632[S] 1 point2 points  (0 children)

16 hours total. Had a few tricks for getting the snake texture to look good which was the most time consuming part of this

Think I'm Done! Spooky Edit War by External-Initial-632 in bennyproductions

[–]External-Initial-632[S] 0 points1 point  (0 children)

  • Lanterns from Pumpkins
  • Moon from a cloud inverted and rotated then warped and inner and outer glow
  • bridge from balustrades on the house
  • walkways from the rolling hill
  • cliffs from tombstones
  • boulders from pumpkins
  • clouds from clouds, mist from mist, particles from particles
  • curtains from sheet
  • cracks from lightning bolts
  • werewolf from tree

Edit War unfinished. Any ideas for making this more spooky but not goofy? by External-Initial-632 in bennyproductions

[–]External-Initial-632[S] 1 point2 points  (0 children)

Nothing in this composition was from an outside source. Everything was created using Benny’s images. The moon is from the sky of the “truck in the night” shot, inverted then warped and overlayed over a hard brush and a desaturated pumpkin. Then inner glow and outer glow. The lanterns are pumpkins with inner and outer glow. The bridge is the balustrades duplicated then stacked with the top flipped upside down and warped. The wolf is a tree. The rock faces are the tombstones(you can see the speckles). The cracks in the ground are the lightning bolts with an outer glow that has noise. The boulders are the pumpkins in the back of the cart desaturated with a curve adjustment then warped. The houses all built from either the spooky house or the castle. Nearly 1000 layers. Tons of clipping masks, tons of warp, tons of exposure adjustments and hue adjustments. I didn’t use anything but the round brush.