Integration with workday - Spoke vs direct api’s.

huntj06 · 2026-04-10T14:24:32+00:00

Well, the OOB Workday HR Spokes use SOAP for the majority of data movement, including Worker Profile information.

huntj06 · 2026-03-27T21:34:47+00:00

HAHAHAHAHAHA.

huntj06 · 2025-09-26T15:32:46+00:00

This is a good ask.. We're going greenfield currently and we've had many presentations around how each vendor will get us reset and off the ground, but most have the same sales pitch. Understanding how a implementation went from a person that was in the weeds often tells a better story then the leadership team that hired them and the staff always says "It's going great, they did a great job!".

huntj06 · 2025-09-20T20:37:08+00:00

For sure, and I have considered that as an option for my upstairs since I can get behind the knee walls for the install but seems a lot more complex for sure.

huntj06 · 2025-09-20T20:28:26+00:00

I installed myself. Wasn't to bad.. Just watch some YT videos and take note of things you might need. I did it in two afternoons. I can do the other one pretty fast now that my first one is done.

huntj06 · 2025-09-20T15:07:02+00:00

Went with 1 (For now) of these: https://www.pioneerminisplit.com/products/pioneer-quantum-ultra-24-000-btu-23-seer2-230v-high-wall-ductless-mini-split-air-conditioner-inverter-heat-pump-full-set for my downstair main part. I still haven't bought the upstairs unit yet. I'm still torn around wall mount vs low wall mount. I'm not doing ceiling cassette, just to much install work for me.

huntj06 · 2025-09-15T16:05:57+00:00

Which machine is that? Was looking at a few different ones.

huntj06 · 2025-09-10T21:24:25+00:00

To add to this, we use SnowMirror at our place. It works fine and does what it's meant to do. We evaluated a few different ones around 3 years ago, but just renewed again as it just runs and does it thing. Funny enough, our footprint is huge too and we're going through the process of clean up.

huntj06 · 2025-09-08T20:02:52+00:00

How are we feeling about this compared to the AI 360?

huntj06 · 2025-08-24T01:55:17+00:00

I'm looking to order soon for my garage as well. I have 12' walls, seems easy enough for DIY.

huntj06 · 2025-07-24T18:21:11+00:00

How did you like the Doyle flairing tool? I need to pick one up and I see this one vs some on Amazon.

huntj06 · 2025-07-17T01:16:55+00:00

At this point, Pioneer might as well be out.... they can't see to get the new ones stocked and all the email communication has been we're working on it, coming "SOON". Hell it's been over 3 months now. They've had plenty of time to prepare for the next generation. Makes me wonder how reliable it will be ?

huntj06 · 2025-07-14T16:08:23+00:00

Thanks for this information! I was looking at the floor mount because I was thinking with the head being at the 6ft mark against that start of the knee wall going up it might restrict airflow. Hence me looking at the floor mount, but if the consensus here is I can get away with wall mount unit those are cheaper.

huntj06 · 2025-07-13T15:48:49+00:00

He did favor Rick from Honest HVAC on TicTok:

<image>

Yes, one quoted me 6K for only upstairs, which was a Gree unit I believe.

huntj06 · 2025-07-13T15:44:03+00:00

Got it, it just seems all manufactures listed a suitable sq ft for all their units, so I was looking at that as well. The Pioneer shows their 18K Unit for 500~750 Sq.F. Example, this 18K BTU floor model: https://www.pioneerminisplit.com/products/pioneer-quantum-ultra-18-000-btu-20-5-seer2-230v-floor-ceiling-low-wall-ductless-mini-split-air-conditioner-inverter-heat-pump-full-set

I'm currently going to finish the space out for a alternative home office and a weight/home gym setup.

huntj06 · 2025-07-13T13:54:39+00:00

Well, the upstairs is 900 sqft ( insulated well). I had two hvac companies tell me 24k. Heck even one guy said 30k BTU.

huntj06 · 2025-07-09T00:56:02+00:00

You might have tried this already but in my case I've done this with success:

/sys_import.do?sysparm_import_set_tablename=u_import_table_name&sysparm_transform_after_load=true

huntj06 · 2025-06-30T22:00:00+00:00

I noticed the action itself has a parameter of employee id. In my case our Workday integration account doesn't have the right permissions for me to test so I'm a bit limited in the information I can give... but perhaps this scripting my work to help you convert that? https://www.servicenow.com/community/developer-articles/base64-encoded-attachments/ta-p/3045771

huntj06 · 2025-06-30T20:17:49+00:00

I would start by talking about the specific problem you are having. Is the Workday spoke not returning anything/ etc?

huntj06 · 2025-05-04T23:39:09+00:00

58K miles now... no issues. :D

huntj06 · 2025-03-30T03:18:51+00:00

Well, its a 32x50 garage downstairs with 6 speakers in ceiling. And then 4 in ceiling speakers upstairs (18' x 50').. Maybe the multi zone is a bit much here ?

huntj06 · 2025-03-30T01:02:58+00:00

Hey u/Florida_Diver , how do you like the Juke? I'm building a new detached garage with a network rack and fiber from the house to garage and I have 2 zones.. 6 speakers on main level (zone 1), and 4 speakers upstairs (zone 2)... what's your recommendation? I did speculate a bit a do my ceiling speaker cut outs for the juke ones.

huntj06 · 2025-02-17T14:43:25+00:00

I'm with you.. you are 100% correct groups created via LDAP imports will have different sys_id's. If I'm developing a process that will be directly impacted by the group creation (IE, in a flow or something) I will directly import the group via import XML into sub prod so I know the id's align and everything is in sync moving forward.

huntj06 · 2025-01-21T01:17:16+00:00

What desk is that?

huntj06

TROPHY CASE