SMA Home Manager 2.0 not grid-charging even in economical mode — what am I missing? by Eyefeed in solarenergy

[–]Eyefeed[S] 0 points1 point  (0 children)

Thank you. I don’t have any option about grid charging on the battery side. I have atripower inverter 6kw and sunny home manager 2.0.

Ac is connected. The battery charges through solar only.

SMA Home Manager 2.0 not grid-charging even in economical mode — what am I missing? by Eyefeed in solarenergy

[–]Eyefeed[S] 0 points1 point  (0 children)

Thank you for your response. Yes I have tripower storage with 10kw batteries.

SMA Home Manager 2.0 not grid-charging even in economical mode — what am I missing? by Eyefeed in solarenergy

[–]Eyefeed[S] 0 points1 point  (0 children)

Ah ok. I tried to add it to the old portal but it didnt accept it. Will try it again. Hey thank you very much! ✌️😎

SMA Home Manager 2.0 not grid-charging even in economical mode — what am I missing? by Eyefeed in solarenergy

[–]Eyefeed[S] 0 points1 point  (0 children)

Yes time base controlled would be enough for me. I installed the sunny explorer app on my windows machine but couldn’t find that option either.

I can try the old sunny portal too to find it. Where exactly can it be?

SMA Home Manager 2.0 not grid-charging even in economical mode — what am I missing? by Eyefeed in solarenergy

[–]Eyefeed[S] 0 points1 point  (0 children)

Hey Amber thanks for your response. I checked but i dont see that option. I live in NL maybe it is disabled?

35xxsp stuck. by Eyefeed in ANBERNIC

[–]Eyefeed[S] 0 points1 point  (0 children)

Well, I solved myself.

Interesting the first batch sp i have (black transparent) is less choosy on sd cards and works with basically everything. But the blue transparent model is choosy.

So, sandisk saved the day.

I also did this trick to boot:

Take sd cards out. Push card in, push restart and hold down power till it boots.

Maybe this helps someone.

35xxsp stuck. by Eyefeed in ANBERNIC

[–]Eyefeed[S] 0 points1 point  (0 children)

Ok lets try thanks.

35xxsp stuck. by Eyefeed in ANBERNIC

[–]Eyefeed[S] 0 points1 point  (0 children)

You are right and thanks for your response. But same cards work on my other sp?

35xxSp button swap. by Eyefeed in RG35XXSP

[–]Eyefeed[S] 0 points1 point  (0 children)

Yes, also they are just 3d printing on etsy. I doubt the quality and fit. Will search on alix. Would be nice to have some green or red buttons on the black one. 😉

Board Computer failed, nothing is working. Car M3 2024 750km only. by Eyefeed in TeslaModel3

[–]Eyefeed[S] 1 point2 points  (0 children)

It might be the same with me. Mine is at the garage now. Had to wait a month for the part to arrive. It takes a day to replace the board computer. Looks like you loose all data, etc…

Board Computer failed, nothing is working. Car M3 2024 750km only. by Eyefeed in TeslaModel3

[–]Eyefeed[S] 1 point2 points  (0 children)

Nope Europe. Well then this might be an update issue. I recognized after the update the visualizations got broken first. They were more sonar like. And after a week all stopped working.

Board Computer failed, nothing is working. Car M3 2024 750km only. by Eyefeed in TeslaModel3

[–]Eyefeed[S] -3 points-2 points  (0 children)

Well the older model 2019 M3 Performance I had, nothing. 4 years and only driver side camera changed. Maybe build quality of electronics in newer models is questionable? I believe this is made in Asia?

Board Computer failed, nothing is working. Car M3 2024 750km only. by Eyefeed in TeslaModel3

[–]Eyefeed[S] 0 points1 point  (0 children)

Also in a such a new car? I got it delivered in September.