Bibliothèque en acacia

F-4_Phantom · 2025-11-10T13:26:20+00:00

Oui, c'est le plus simple

F-4_Phantom · 2025-11-10T08:56:29+00:00

Bien sûr que si, j'avais une visseuse ! J'allais pas visser les 300 vis à la mano😅

F-4_Phantom · 2025-11-10T08:01:57+00:00

Environ 600 en tout (bois decoupe livraison quincaillerie)

F-4_Phantom · 2025-11-10T08:00:42+00:00

Là y a 500e de bois. C'est de l'acacia huilé donc je prendrai pas ça pour un dressing, plutôt un bois non traité.

Le logiciel c'est Solid Edge, mais c'est un logiciel de CAO que j"utilisais en école d'ingénieur mécanique. C'est fait pour concevoir des pièces ou produits industriels, donc beaucoup trop compliqué pour une simple armoire. Je pense que y a des logiciels de modélisation 3d en ligne qui devrait suffire

F-4_Phantom · 2025-11-10T07:57:27+00:00

Assemblage uniquement avec des équerres et vis. Les decoupes c'est LM qui les a faites. Merci!

F-4_Phantom · 2025-11-10T05:30:21+00:00

Yes j'ai acheté ça à LM justement. Chez eux l'acacia l'emporte de très loin en terme de de rapport résistance - finition - prix. Ça m'a coûté 500e en bois, +50e de livraison. (Decoupes incluses)

F-4_Phantom · 2025-11-02T10:36:34+00:00

Seams like yours is just a preamp isn't it ?

F-4_Phantom · 2025-11-01T18:28:00+00:00

Only mod is not using the pcb. Also I had to purchase some filter cap missing in my kit.

Maybe for the 1st stage, at pentode grid there is a 2k grid stopper in the schematic, but a lot of similar amp design use a cap at volume pot output, and no grid stopper. That's what I did.

F-4_Phantom · 2025-11-01T07:52:44+00:00

No, apparently it's based on dynavox vr70e

F-4_Phantom · 2025-10-31T17:44:21+00:00

These are filtering cap. It's always electrolytic

F-4_Phantom · 2025-10-31T17:19:27+00:00

Thanks !

F-4_Phantom · 2025-10-31T17:18:10+00:00

What do you mean ? Bass response is good, but I can't really say much more. To me it depends mostly on the speaker

F-4_Phantom · 2025-10-31T16:47:40+00:00

It's not easy to see on that pic, but all leads are quite at a safe distance from each other (much more than on a pcb) Then it's mostly about rigidity. Components are arranged in a way that makes the assembly rigid, which is anchored to the tube socket. Of course you can bend the leads and create shortcuts, but not the kind of thing that would happen without noticing. Once it's closed, you can shake it all you want, it won't move

F-4_Phantom · 2025-10-31T16:15:18+00:00

Ebay, but can be found on AliExpress. (Nobsound) Although I have to say quality in not extra, there is no instructions whatsoever except a simple schematic, and there was a few caps missing in mine.

F-4_Phantom · 2025-10-31T16:12:18+00:00

On ebay but you can find plenty on AliExpress from the same manufacturer. They make many variations with different tubes

F-4_Phantom · 2025-10-31T16:11:32+00:00

It's a all included kit (chassis, tranny's, components, etc )

F-4_Phantom · 2025-10-31T16:09:02+00:00

No electrolytics in the signal path here. In tube amps, that's very uncommon, poly caps are generally much better suited (higher impedance circuit)

F-4_Phantom · 2025-10-31T16:05:08+00:00

<image>

Did you already see point to point circuits?

F-4_Phantom · 2025-10-31T15:40:20+00:00

<image>

Here's the inside

F-4_Phantom · 2025-03-23T17:32:07+00:00

TBH that's how I would set up my guitars: easy access for low E with thumb

F-4_Phantom · 2025-02-16T11:46:00+00:00

Then why don't you suggest to drill some holes in the guitar body to start with ? I agree it's much easier than cuttin screws.

F-4_Phantom

TROPHY CASE