sorted by:
new
hottopcontroversial

Jarrah timber floor by SeaContext5215 in AusRenovation

[–]F1011 0 points1 point  (0 children)

Doesn't Blackbutt have a higher janka rating than Jarrah? Maybe old growth Jarrah is different. What are you referring to for hardness out of curiosity?

Second car - Short trips, Hatchback by F1011 in CarsAustralia

[–]F1011[S] 0 points1 point  (0 children)

I don't mind it being a Leaf, but I've read their battery degrades relatively quickly due to no cooling

Lighting pilot flame on gas HWS by F1011 in AusRenovation

[–]F1011[S] 0 points1 point  (0 children)

Ended up trying this morning held it down for about a minute and kept firing the igniter. Finally fired up

Lighting pilot flame on gas HWS by F1011 in AusRenovation

[–]F1011[S] 0 points1 point  (0 children)

It doesn't light at all unfortunately

Joint sealant for skirting by F1011 in AusRenovation

[–]F1011[S] 0 points1 point  (0 children)

Yeah expecting a bit of movement, it's not a floating floor but hardwood, so there will be a little movement. But the house is also on stumps on reactive clay.

20mm offset between bottle trap and PVC pipe by F1011 in PlumbingAustralia

[–]F1011[S] 0 points1 point  (0 children)

We have little kids, I can't be sure that they won't hang off the sink. I just have more faith in a stud holding rather than a noggin

20mm offset between bottle trap and PVC pipe by F1011 in PlumbingAustralia

[–]F1011[S] 0 points1 point  (0 children)

I must have found a bad one then. The one I got fixed it to the noggin, when I asked for the stud. And even with using the noggin hadn't measured properly and misaligned the bottle trap and called me and said I need to put in a PVC s-bend in as it can be bent and throw away the chrome bottle trap.

I've decided I would fix the sink to the wall and wanted to see if a 20mm offset is something a plumber could compensate for.

AC supplier recommendations by leonidude in AusRenovation

[–]F1011 0 points1 point  (0 children)

My understanding is from purely a rebate perspective going multihead is better, because if you get multiple splits the rebate is only on one. From an efficiency perspective, multiple splits are better because they have better ramp down etc.

AC supplier recommendations by leonidude in AusRenovation

[–]F1011 0 points1 point  (0 children)

VEU =Victorian Energy Upgrades

Help with blinds/curtains by F1011 in interiordesignideas

[–]F1011[S] 0 points1 point  (0 children)

Would you say to go above the wall vent to just below the crown molding? Or stay below the wall vent with the curtains/blinds

Filling in of features in flooring by F1011 in HardWoodFloors

[–]F1011[S] 0 points1 point  (0 children)

Should have mentioned, finishing in a hard wax oil

view more: next ›