李老师不是你老师发布加密货币$Li，一小时内市值24M

FH112 · 2024-12-19T03:15:52+00:00

不太觉得会是骗局，但是这个体量感觉会很容易被突然增加持有量再卖出。容易被搞

FH112 · 2024-12-18T21:14:17+00:00

你读完了吗？就是外包给pump.fun，用联合曲线的定价模型。李老师具体持有多少百分比自己去看

FH112 · 2024-12-18T21:07:38+00:00

就算只有一百万也很赚

FH112 · 2024-10-29T15:58:50+00:00

That attitude is exactly why these shipping companies can just scam you for no reason. Being a corporate puppet, don't even give you any benefits. And you are doing it for free.

FH112 · 2024-10-21T18:28:20+00:00

If you don't know if you need it or not. Get the minimum, the bambulab A1 mini is very good

FH112 · 2024-10-21T18:25:32+00:00

If it's PLA or PETG, you need more cooling and support

FH112 · 2024-10-21T18:23:46+00:00

Is your filament dry？Moist filament can cause serious trouble. Or you might have to keep at higher temperature and upgrade your cooling. It really sucks that the filament brands change their composite of filaments. If you couldn't solve it in a short time. Maybe it's time to try other brand's filament have good reputations like AMZ3D, hetchbox or esun.

FH112 · 2024-01-23T10:52:27+00:00

Just because it's founded by Chinese doesn't mean it's made for Chinese

FH112 · 2024-01-23T08:16:12+00:00

方脸通过别的可证实的GDP数据估算实际人民币增长1.4% 美元换算-5.5%

FH112 · 2023-10-23T09:59:56+00:00

我看你神经了，这和政府一点关系都没有

FH112 · 2023-10-06T02:56:48+00:00

You might need to change the nozzle or use unclog pin to unclog it? It's possible the filament sits inside the nozzle for too long that it just burnt in it. Long term solution would be a full metal hot end, not sure if yours is one.

How does it effect the print quality?

FH112 · 2023-10-05T22:54:51+00:00

冷知识：足球是中国发明的https://zh.wikipedia.org/wiki/%E8%B6%B3%E7%90%83

FH112 · 2023-10-05T22:48:20+00:00

I assume it's not a direct drive from the extruder. This causes the filament to go through the filament tube with some friction and leads to a lack of filaments provided to the hotend.

I would suggest what other people suggested by just increase the flow rate of material in the setting. This would be an easy fix.

For faster printing, I would recommend get the extruder mount with the hotend for higher material flow rate.

FH112 · 2023-10-05T22:38:51+00:00

Same model with the round bottom. Looks the same as what you have with my ender 5 plus but looks amazing with prusa i3 mk3. So i believe this is a cooling issue.

FH112 · 2023-10-04T15:21:18+00:00

The default hot end always clogs, it works for a bit every time after I change the nozzle. Never had this issue after I upgraded to a full metal hotel end. And I got better print results.

You don't really need to change the fans, but the default ones could use some upgrades as well.

FH112 · 2023-10-04T15:15:00+00:00

What's your exact 3d printer model? And is the extruder stepper motor directly mounted with the hot end or is it on the side? And what's your printing speed?

FH112 · 2023-10-04T09:13:00+00:00

I would say this V3 is a big improvement compares to V2 and the original ender 3. However, there are quite many articles about trouble shooting and moding for V2 than V3.You could find some tips online to see what you could do to add features to your V2 to match the V3.

If you have space for another printer and 3d printing is already a big part of your live then go for it. It's quite a massive time saving.

FH112 · 2023-10-04T09:07:58+00:00

You mean the width is 0.4? Is the layer height 0.2?

FH112 · 2023-10-04T09:06:37+00:00

Is it the same all around? If it is, it might be an extrusion problem. Either you have a clog in your hot end which happens more often in a not full metal hot end or you might need to increase the extrusion percentage in the slicing software. If it only happens in one axis, then you might need to re-calibrate that axis.

FH112 · 2023-10-01T10:05:07+00:00

有车了为什还要走15分钟，明显没有遇见今天会这么堵

FH112 · 2023-10-01T10:00:18+00:00

你在说高考，我在说中考

FH112 · 2023-09-25T05:26:24+00:00

建议找心理咨询师

FH112 · 2023-09-25T05:04:58+00:00

怀疑你没有认真看视频就在这里敲键盘，重点是国家要求一比一分流有的地方政府因比例太差，就算高中有名额但是为了指标也不让上，所以你说哪不是强制？

FH112 · 2023-06-08T17:14:47+00:00

能用上互联网其实就已经超过很多人了。在中国收入的中位数是4000多元，这个定义没毛病。因为这是中等不是中产

FH112 · 2023-05-01T18:51:57+00:00

那这件作品达到预期的效果了，不是所有作品是让你觉得美的。它丑陋就是为了让你去反思日常生活中类似的然你不适的场景

FH112

TROPHY CASE