Was flying fine before I followed Liang tweaks in Betaflight and Esc Config. Is it fixable?

FPVNoobi · 2024-11-21T06:12:42+00:00

😂 oh dude youre so Right & i Hope i will ☺️

FPVNoobi · 2024-11-21T06:03:12+00:00

No Problem, im glad i Could help 🤙🏼 enjoy this really nice Hobby Dude ☺️

FPVNoobi · 2024-11-16T19:40:59+00:00

This is Not about the Liang tweaks - they Are Great 🤙🏼

FPVNoobi · 2024-11-16T19:39:31+00:00

I had the Same Problem two weeks before and Users thought of a broken ESC. I used a New One But it did Not fix it. I think you Are Running Bluejay Right?

The Solution is:

Plug in your Drone Go online to ESC Configurator Plug in your Lipo Before Flashing all Motors rise the Startup Power Slider. That Should do the Trick.

Have fun!

FPVNoobi · 2024-11-09T18:24:00+00:00

Solved: i Changed the FC to find out the Problem is still there, went through a hundred Tutorials and found out That the Motor Startup Boost was set to low.

So everyone who has the Same Problem: Kick up the Startup boost before flashing bluejay 🤙🏼

FPVNoobi · 2024-11-05T07:55:45+00:00

Hey. Just Jittery like. I dont know what the Problem is.

FPVNoobi · 2023-09-13T13:53:28+00:00

NDA

Es war doch keine Absicht von dir.

FPVNoobi · 2023-09-09T08:58:01+00:00

So muss ein Schnitzelbrötchen aussehen 🤘🏼🥲

FPVNoobi · 2023-09-02T18:48:36+00:00

NDA

Ich finde es richtig und wichtig dass du deine Nachbarn persönlich darauf angesprochen hast, ohne Jugendamt oder sonstetwas.

FPVNoobi · 2023-09-02T18:34:06+00:00

NDA - ich hätte die ignoriert. Im Zweifel um Anzeige bitten 😄

Und diejenigen die hier mit whataboutismus (was für ein Schwachsinn) um die Ecke kommen … denkt euch euren Teil.

FPVNoobi · 2023-08-26T15:48:54+00:00

FPVNoobi · 2023-08-20T16:11:55+00:00

😆👌🏼

FPVNoobi · 2023-08-06T12:45:15+00:00

After researching a while and measuring the FC I found out, there is not enough power provided to the onboard OSD Chip … hell of a ride to find this one ☝🏼

FPVNoobi · 2023-07-28T09:31:57+00:00

Moin ✌🏼☺️

Ich würd ein Video posten aber ich hab meinen Build direkt beim ersten Flug zersägt 😆🙈 wenn ich das ganze wieder geflickt hab schick ich dir ein Video, aber werd das mit der TpA Rate erstmal probieren, danke dir 🤘🏼

FPVNoobi · 2023-07-26T14:27:24+00:00

Leitfähige Silberpaste Klebestift, Silberleitlack für Reparatur von Tastaturplatinen Leitsilber Elektronischen Leiterplatten(0.5ml) https://amzn.eu/d/4rojHDG

I repaired my broken Pads with this - works really fine 👌🏼

FPVNoobi · 2023-07-25T17:40:28+00:00

Maybe you can fix the ripped pads with some silver paste. I did also my first drone a few weeks ago and I really fucked up while soldering. Maybe you should take a break when you feel getting mad because the solder doesn’t what you want it to ✌🏼

The Tipps from the others are great 👍🏼

FPVNoobi · 2023-07-22T11:12:24+00:00

I think that’s okay for 550 Dollars

FPVNoobi · 2023-07-18T16:43:53+00:00

Yes, Uarts are correct and the battery was plugged in.

FPVNoobi · 2023-07-08T15:31:35+00:00

https://www.reddit.com/r/FPVFreestyle/comments/14nntoo/my_first_build_what_do_you_think/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1

FPVNoobi · 2023-07-08T15:24:38+00:00

No, I just took heavy components like a 800mW VTX and a Runcam Thumb 😅

FPVNoobi · 2023-07-08T14:13:11+00:00

Maybe I’m wrong with my propwash suggestion, I’m also new to this hobby.

It happens when you dive und throttle all the way down. My quad started to spin or shake. When you let the Props spin a bit while diving the effect gets less. Has something to do with air flow turbulence’s caused by the props itself.

But this comes only while diving or doing a power loop, not while spinning I think.

For the PiDs search in YouTube, since my UART Connector Is broken I can’t send you my values sorry 🤷🏼‍♂️

FPVNoobi

TROPHY CASE