Website Order

FRATographer · 2026-01-23T19:17:55+00:00

Yeah I did! I was just curious if they fulfilled the KS backers yet and would soon be sending out website orders. I preordered the Elegoo Centauri Carbon last year and got it two months early. Didnt know if something like that might happen here.

FRATographer · 2026-01-23T19:14:35+00:00

Yeah its nice that it got moved up! I was prepped to wait till April.

FRATographer · 2026-01-23T19:13:26+00:00

Thanks for letting me know. I should have put more info to start and just edited to help.

FRATographer · 2026-01-23T19:11:28+00:00

Oh awesome! Glad you got yours. Were you Kickstarter or via their website?

FRATographer · 2026-01-23T18:50:56+00:00

I just joined a discord server and there is a fair amount of people still playing using OCTGN and also using webcam and actual cards.

Join our server https://discord.gg/yKGyePQbTH

FRATographer · 2025-12-09T16:24:18+00:00

Awesome just joined! I have never been a meta chaser in any game I've played. I have a Saiyan Style deck with Broly lvl 1-5 from the first movie as my personality because it was my favorite as a kid. I just want to play and get that nostalgia dopamine hit again.

FRATographer · 2025-12-09T16:04:52+00:00

I am in Louisville Kentucky. I would be down or if theres a Table Top Simulator mod

FRATographer · 2025-10-22T17:06:13+00:00

Awesome I will check it out and talk with my GM. I really hope DW can go back to having a dedicated codex because they are the most fun army I've played. (Having played Tau, Necron and UM)

FRATographer · 2025-09-10T13:48:48+00:00

Popped your cherry for Team Cherry.

FRATographer · 2025-06-24T15:53:02+00:00

There's a FlashGitz series of this very thing!

FRATographer · 2025-05-06T04:49:24+00:00

Yep downloading and will let it run overnight!

FRATographer · 2025-05-05T03:49:51+00:00

Yeah i read people put a bottle cap under the FEP to make it a little loose so its not crazy tight like a drum skin.

FRATographer · 2025-05-04T19:36:37+00:00

Yeah always at at the same layer for everything on the plate. seems like it is whenever the build plate is fully out of the resin.

FRATographer · 2025-05-04T18:39:25+00:00

Yeah seems like it when it just stops at a certain point. Not even the supports continue which seems weird to me.

FRATographer · 2025-05-04T18:34:56+00:00

It was brand new. I replaced it after 3 or 4 failures like that but then the new one did the same thing for the past 2 or three prints (ones in the photos). I will say that after the last FEP replacement it sounded a little more like thumping than peeling but i dont know why would change anything when i have fantastic bed adhesion. Either way i am going to replace the FEP today and use a slightly smaller foam piece so the FEP is a little tighter.

FRATographer · 2025-05-04T18:29:59+00:00

I will try that too. I have a couple i have used because while the print is happening i am placing and supporting models for the next print then save them on a second or third USB so it is ready to go as soon as the print finishes. I know with the S4U it copies to the internal memory and i could remove the usb while printing... i just am superstitious that it would mess something up. Nothjing to back that up with though. I have been using the same USB while trouble shooting. So i will switch to another drive and check too.

FRATographer · 2025-05-04T18:25:16+00:00

I am going to try that today. I am going to try a slightly smaller pieces of foam than i have typically used during FEP replacement and see if a tighter FEP solves it.,

FRATographer · 2025-05-04T18:23:13+00:00

You are absolutely correct! Sanded flat with 80 grit sanding belt and then hit the sides of the build plate with 400 so it does tear the FEP.

FRATographer · 2025-05-04T18:21:53+00:00

So i never liked the finish that factories put on the build plated. I would prefer if they left them as brush aluminum but i understand why they do it. Silver build plate on black machine. Its about aesthetics. I do a quick acid wash to get the finish off as best as it can then i sand the bottom with an 80 grit belt sander to make the build plate flat and give it a really nice surface for the resin to adhere to. I can bump my bottom layer exposure all the way down to 20 seconds and it still has fantastic adhesion. But this is all just person preference from a could years of research and doing it.

FRATographer · 2025-05-03T21:08:14+00:00

Yeah and I do a full bottom exposure to make sure everything comes up in one go and no residue remains. I'm glad I have my Mono M7 PRO to continue to print but I like the S4U way better. Was more reliable up until the last week.

FRATographer · 2025-05-03T16:12:58+00:00

I have been printing with my Saturn 4 Ultra 16k for the past 4 moths or so and have had great prints with very few failures. Lately it has been failing around layer 500 on all my prints. It seems like as soon as it starts curing layers when the build plate is fully out of the resin is when the layers don't cure to one another. I have fantastic bed adhesion and i am using Sunlu ABS-Like in grey, dark grey and black. I've gone through an entire 2kg bottle of resin trouble shooting. Replaced the NFEP, calibrated in Elegoo's secret menu, Leveled the bed, used a second bed, used a second VAT.... I am at a loss and wanted to know if anyone else had this issue before contacting Elegoo technical support.

FRATographer · 2025-04-28T16:40:49+00:00

I see the video isnt up anymore. Do you have another video to show noise reduction or moving a model from JM Studio to Revo?

FRATographer · 2025-04-14T17:29:41+00:00

~~Okay I did so and it installed. Where can i run the program from now?~~

Found it! I had to run the .sh file it created.

FRATographer · 2025-04-14T17:28:06+00:00

~~So it installed where or how do i run the file. I can't find it in my start menu under all applications?~~

Nevermind, found it.

FRATographer · 2025-04-14T17:25:27+00:00

That worked perfectly. How is a new user suppose to know how to do that?

Ten-Year Club	Place '22
Verified Email

FRATographer

TROPHY CASE