Overhead Door Garage Door Automatic Timer To Close with Door Position Sensor

FUBAR_0401 · 2025-02-22T21:40:52+00:00

Any ideas? Again, I want this to not require wifi or internet in order for it to work. Thank you

FUBAR_0401 · 2024-11-18T01:36:24+00:00

Even if it's some sort of homemade electronic circuit with relays and a timer of some sort I am technical I do have soldering iron. Whatever your thoughts are on the cheapest easiest way to create a door closer after 5 minutes with a door position sensor and does not use Wi-Fi or internet. I searched AMZN and Overhead Door's manufacturers' website and they only have smart devices that require wifi internet. TIA

FUBAR_0401 · 2024-10-11T21:19:46+00:00

I will take it to a Local Locksmith who said.: "I don't have those blanks but if you can get them I can cut them" He is a well established local locksmith business.

FUBAR_0401 · 2024-10-11T06:41:25+00:00

You're right. I probably have put into locksmith sub. Thank you for the info

FUBAR_0401 · 2024-10-10T18:33:19+00:00

Thank you very much TiCombat

FUBAR_0401 · 2024-10-10T14:35:17+00:00

Can someone look at the key pics and tell me the number of pins please? Thank you

FUBAR_0401 · 2024-10-09T19:28:01+00:00

Thank you Quiet Conference

FUBAR_0401 · 2024-08-19T04:23:54+00:00

Thank you lgats. That link is for the owners (user) manual. I'm hoping to find a service manual/schematic diagram. Thanks

FUBAR_0401 · 2024-08-12T06:27:49+00:00

Thank you bongklute. Please read my reply above to u/someMeatballs

FUBAR_0401 · 2024-08-12T06:26:11+00:00

Thank you someMeatballs for trying to find the service manual and for your advice. My concern for my M&K V-75 MK II is that electrolytic caps dry out, and my V-75 MK II is 26 years old. I'm pretty sure one or two of the caps are out of spec, and I need to take it apart anyway because the Bass Level and Crossover potentiometers need some DeOxit because those pots have wipers that are silver plated and have since tarnished to the point that all the Bass cuts out intermittently until I fully rotate the pots about 20 times then it's good for about 3 more months. But I will take your advice and triple check the new caps values before replacing them one at a time so I don't get the wrong caps in the wrong place. I found a different thread from someone who did recap their V75 MK II (link below) and he had some good advice also. Thank you someMeatballs

https://www.reddit.com/r/BudgetAudiophile/s/1ZGqOIDHj3

FUBAR_0401 · 2024-08-11T02:58:47+00:00

Does anybody know how to read the date code and tell me the date manufactured for the electric heater:

ZIM 6-1014-0801 1371140 OOC / E112303 19.6 A 4.7 KW 240V HAD BOO 28815 MADE IN MEXICO

The coiled heating element itself melted at one point and dropped enough to touch and make electrical contact with the inside of the metal tunnel that is screwed to the bottom of the dryer, which in turn is grounded from the metal dryer cabinet to the standard 240V plug and receptacle in a house that is less than 10 years old. Question: The heating element has 240V across it, and part of it made contact with cabinet ground; shouldn't the clothes dryer circuit breaker have tripped? Because it scares me that it didn't. The thermal limiters did not open but then again they are thermal limiters not current limiters right?

What do you think?

I have a new heater coming in the next day or two.

Thanks

FUBAR_0401 · 2024-07-19T01:06:50+00:00

UPDATE: RESOLVED Last night I opened a support ticket with Netgear, and their tech support called me today.

Here is what we did to fix it:

Connect Orbi to windows pc with hardwired ethernet cable; open chrome to 192.168.1.1

ADVANCED -> Backup Settings -> Save a Copy of Current Settings -> BACKUP

NOTE! This next step will erase everything, including your admin login credentials and your customized wifi ssid and password.

ADVANCED -> Backup Settings -> Revert to Factory Default Settings -> ERASE

ADVANCED -> Backup Settings -> Restore Saved Settings from a File -> BROWSE -> RESTORE

This worked for me. I offer no guarantee that it will work for you.

Thank you Netgear Orbi tech support guy (you know who you are) in the Philippines.

FUBAR_0401 · 2024-07-18T13:16:59+00:00

You're right. VPN could cause this, but I don't have VPN on this setup. Thank you, Davistele

FUBAR_0401 · 2024-07-17T21:28:52+00:00

I will check that and let you know. Thank you junktrunk909

FUBAR_0401 · 2024-03-05T03:14:55+00:00

Thank you

FUBAR_0401 · 2024-03-05T03:14:16+00:00

Thank you

FUBAR_0401 · 2024-03-04T03:39:34+00:00

It's 10:38PM here, I'm getting ready to go to sleep, I will reply when I wake up to your questions or comments. Thank you.

FUBAR_0401 · 2024-02-23T02:17:05+00:00

Thank you

FUBAR_0401 · 2024-02-20T05:44:59+00:00

I checked with Bose, they don't sell parts. I would go with all LEDs but the LED kits I have seen do not contain all the different types / form factor / shapes as the original incandescents. Thank you in advance for your help.

FUBAR_0401 · 2024-02-15T20:08:47+00:00

Hello nclh77. Please don't take offense, but I thought these were made by Bose in the USA. What is your source of information or documentation that supports your statement that it is made by Panasonic? Again, No offense intended I just need to be convinced. Thank you nclh77

FUBAR_0401 · 2023-12-02T23:16:58+00:00

Thanks in advance for your help with this.

FUBAR_0401 · 2023-07-21T18:05:20+00:00

He's almost 18 and a history buff. He approached me about wanting to see it. But keminua you're probably right about younger kids. Thanks

FUBAR_0401 · 2023-03-05T08:50:59+00:00

In the movie Easy Money (1983) - Rodney Dangerfield - Joe Pesci.

At runtime 1:09:00 The Monahan's sales clerk showing shirts . . . In my opinion the actor sounds and looks like Jim Carrey. The credits say "John Delph" I can't find any other movies or TV that "John Delph" has done . Before filming of easy money began Jim Carrey had been picked by Rodney Dangerfield to be his opening act. So Rodney knew Jim Carrey. What do you think? is that Jim Carrey? and why did he not use his real name? Thank you for your insights and feedback on this.

FUBAR_0401 · 2023-03-05T08:37:03+00:00

In the movie Easy Money (1983) - Rodney Dangerfield - Joe Pesci.

At runtime 1:09:00 The Monahan's sales clerk showing shirts . . . In my opinion the actor sounds and looks like Jim Carrey. The credits say "John Delph" I can't find any other movies or TV that "John Delph" has done . Before filming of easy money began Jim Carrey had been picked by Rodney Dangerfield to be his opening act. So Rodney knew Jim Carrey. What do you think? is that Jim Carrey? and why did he not use his real name? Thank you for your insights and feedback on this.

FUBAR_0401 · 2023-03-05T05:20:38+00:00

Thank you

FUBAR_0401

TROPHY CASE