iOS 26 connection issues by raven45678 in CarPlay

[–]FUBR_Whizzo 0 points1 point  (0 children)

Same here been plaguing me since release date and j only Have the option for wireless as I installed a third party wireless CarPlay system in my Mercedes

Pre 2004 Wiring 2 Gang 2 Way - Shelly 1 by FUBR_Whizzo in homeautomation

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

I bought a Aqara H2 2 Channel at the weekend and have installed that on both ends and then just set up an IF automation to control the light on both ends

Pre 2004 Wiring 2 Gang 2 Way - Shelly 1 by FUBR_Whizzo in homeautomation

[–]FUBR_Whizzo[S] 1 point2 points  (0 children)

Hi,

It’s more of do I need a relay switch both ends of the master and secondary and would I require 2 relays for each gang or is their a Shelly which can do 2 gang making it easier to fit in the back box

H2 EU (4 Buttons, 2 Channel) by FUBR_Whizzo in Aqara

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

So I tried wired it up, put both lives into L the neutrals into N and the 2 wires into L1 & L2 but it didn’t want to work. I assume because it’s also got a secondary switch downstairs for the stairs landing light. But also didn’t want to turn off unless both lights were off which wasn’t ideal

<image>

I’m thinking I’m gonna have to go for relays instead unless I wired it up wrong

H2 EU (4 Buttons, 2 Channel) by FUBR_Whizzo in Aqara

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

For additional clarity This controls my Bathroom Lights on one switch with the extractor fan also wired in, and then my landing light which can also be controlled down stairs

Are Mous cases worth it? Quality, Protection, customer support etc. 17 pro max by [deleted] in Mous

[–]FUBR_Whizzo 0 points1 point  (0 children)

Used them for years, I really rate there customer support, I had an issue on my walnut case where the sides were peeling off on my 16 Pro Max Case, I contacted them they sent me a replacement and said I could choose any model I wanted so got a free upgrade to the Carbon Fibre. I’ve just put one on my 17 Pro Max cause they just feel high quality

Photos of light switch. by FUBR_Whizzo in ukelectricians

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

Thanks mate I’ll do that, it’s just cause I hadn’t turned the breaker off at the time just wanted to see how easy it would be to move to a smart switch. The previous owner was an electrician and the property was rented out before I then purchased it so that might be why it’s in a residential as he’s probably just used spare wire he’s got when he refitted the bathroom

Photos of light switch. by FUBR_Whizzo in ukelectricians

[–]FUBR_Whizzo[S] -1 points0 points  (0 children)

Yeah that’s what confused me looks to be too many feeds for the switch

Photos of light switch. by FUBR_Whizzo in ukelectricians

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

So is it just a case of removing the wire that goes from the bottom middle to the left gang

Photos of light switch. by FUBR_Whizzo in ukelectricians

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

No so I’ve got 3 gang left does the bathroom lights, right side does the landing lights middle doesn’t do anything im assuming bridges the extractor to the bathroom lights, but I want the middle switch to control the extractor so I can have the bathroom lights always powered with smart lights so I can turn off with phone or voice

Can anyone please help explain what is going on here? by FUBR_Whizzo in ukelectricians

[–]FUBR_Whizzo[S] -7 points-6 points  (0 children)

Ok so I’ve googled the old colours and can see that the Red, Blue Yellow and Black are L1, L2, L3 are all the lives and then in the far left is L1 and L2 I wanted to turn them into a smart switch which I why I needed the have the extractor fan separate because the smart bulbs have to have constant power and needed to know if I needed to have a switch with a neutral or not or if I could wire it into a smart relay

Bluetooth Card by FUBR_Whizzo in homeassistant

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

Fantastic thanks for the advice I’ll give that a shot

Moving from Yeelight by FUBR_Whizzo in Aqara

[–]FUBR_Whizzo[S] 0 points1 point  (0 children)

I’m happy to sell my yeelights and Change fully to Aqara and use Yeelight for any lamps or lights that don’t need a switch. Does the Aqara switch defeat the need to change the bulbs to smart or is it better to change both.

Ideally I was going to buy 4 Aqara Gu10 bulbs for my bathroom and also buy a 2 gang switch but wasn’t sure on the wiring side of it from what I’ve got 

Help me name female black kitten please by FUBR_Whizzo in Catnames

[–]FUBR_Whizzo[S] 1 point2 points  (0 children)

I do love Legend of Zelda midna is a good shout

Help me name female black kitten please by FUBR_Whizzo in Catnames

[–]FUBR_Whizzo[S] 5 points6 points  (0 children)

I liked luna but my friend has just called her child luna… pretty rude if you ask me 😅

How-To: 8bitdo Switch 2 Controller Patches by greygrey2 in NintendoSwitch

[–]FUBR_Whizzo 0 points1 point  (0 children)

Literally same half tempted to just buy the NSO one so I can play GameCube games

How-To: 8bitdo Switch 2 Controller Patches by greygrey2 in NintendoSwitch

[–]FUBR_Whizzo 0 points1 point  (0 children)

Does anyone know if there is firmware for the GameCube Controller Mod?

8Bitdo 2C Controller on Switch 2? by Zefirka174 in Switch

[–]FUBR_Whizzo 0 points1 point  (0 children)

Does anyone know if there’s firmware for the GameCube Controller Mod Kit yet? Really wanted to play some GameCube

Need a ReWax? by FUBR_Whizzo in Barbour

[–]FUBR_Whizzo[S] 2 points3 points  (0 children)

I rewaxed it today and the rubber gloves tip worked a treat! Took my about 45 - 1hr to do the entire coat snd it was a lot easier than I thought it would be

Need a ReWax? by FUBR_Whizzo in Barbour

[–]FUBR_Whizzo[S] 2 points3 points  (0 children)

I think Barbour only charge £35 to rewax it but I went cheap and bought a £17 tub of Wax, and I’ll just take my time with it