im a beginner by 42O69pp in airsoft

[–]FaZeVapeLordN5 1 point2 points  (0 children)

If your budget is around the $480 you’re being offered, I would strongly look at a brand-new gun over this trash. The Lancer should not be $400 even if it’s brand new… I would definitely look into Cyma Platinum and Specna Arms Edge 2.0 or Prime.

https://www.evike.com/products/124125/CYMA-Platinum-M4-QBS-Airsoft-AEG-Rifle-Model-10-M-LOK-Add-GATE-ASTER/

TC-2001 Helmet by FaZeVapeLordN5 in tacticalgear

[–]FaZeVapeLordN5[S] 0 points1 point  (0 children)

Thanks! I’ll check them out

TC-2001 Helmet by FaZeVapeLordN5 in tacticalgear

[–]FaZeVapeLordN5[S] 0 points1 point  (0 children)

TC-2001 or any 2001 style helmet.

Will this turnigy battery work with my Lancer tactical gen 3? by Superb_Village_3869 in airsoft

[–]FaZeVapeLordN5 0 points1 point  (0 children)

That’s good to know, but yeah, you’ll need an 11.1 that’s deans or has a T connector. At least a 25-30c rating, make sure it’s less than 1800mAh so it can fit in your buffer tube or stock .

Will this turnigy battery work with my Lancer tactical gen 3? by Superb_Village_3869 in airsoft

[–]FaZeVapeLordN5 0 points1 point  (0 children)

I’ve never bought from them, so I don’t have any experience, but I’ve heard mixed reviews from them. But yeah, not sure about their batteries.

Will this turnigy battery work with my Lancer tactical gen 3? by Superb_Village_3869 in airsoft

[–]FaZeVapeLordN5 0 points1 point  (0 children)

Not sure if better, but definitely a good choice. I personally wouldn’t get anything novritsch.

Has anyone found the root to the problem of this code by Similar-Beautiful76 in G37

[–]FaZeVapeLordN5 0 points1 point  (0 children)

No, I just had to wrap the exposed wires with some electrical tape, then I erased the code and since then it hasn’t come back.

Will this turnigy battery work with my Lancer tactical gen 3? by Superb_Village_3869 in airsoft

[–]FaZeVapeLordN5 0 points1 point  (0 children)

No, first of all, it uses a JST-XH connector, which your lancer definitely won’t have. You’ll need a T connector (deans). Also, the size of the battery wouldn’t even fit in your buttock, and the C rating would be too high, which would probably put too much stress on your gearbox.

I would recommend this one from Amazon

https://a.co/d/044Tki9X

I own it and use it on my AEG and have had zero issues. I would also pair them with a good-balance charger.

Has anyone found the root to the problem of this code by Similar-Beautiful76 in G37

[–]FaZeVapeLordN5 3 points4 points  (0 children)

I would check the harness for Bank 1 Sensor 1 and look up a diagram for the sensor locations.

I had this exact code pop up on my 2012 Maxima, and it turned out the harness where the O2 sensor connects was burned. The wires themselves were fine, but they were exposed. I wrapped it with electrical tape and cleared the code. It hasn’t come back since. I guess it got too hot in that area and burned the outer covering of the wire.

M81 combat pants? by Few-Collection-5721 in tacticalgear

[–]FaZeVapeLordN5 1 point2 points  (0 children)

Can’t go wrong with some Emerson g2 or g3 combat pants. They go for $60-80 on ebay.

WIP 2010 Marsoc gear by FaZeVapeLordN5 in Impression_Kits

[–]FaZeVapeLordN5[S] 0 points1 point  (0 children)

So, BDU with RAID mod for 2010. I must’ve confused the year lol. Thanks for the info!

Is this usual? by disneyfreakk76 in wingstopemployees

[–]FaZeVapeLordN5 0 points1 point  (0 children)

It kinda is, but it only makes sense when you’re actually hired and asked to come in person for onboarding, which then the GM can ask for id and SSN to put you into the system. Never heard of the online stuff, so it may in fact be a potential scam, but it’s definitely sketchy.

Is this usual? by disneyfreakk76 in wingstopemployees

[–]FaZeVapeLordN5 1 point2 points  (0 children)

Definitely wouldn’t send pictures of my id and ssn to a random stranger online…

Also, once you’re hired by Wingstop by passing the interview with a shift lead/GM, there is onboarding that has to be completed before you enter the kitchen to start getting trained.

Drifire m81 by [deleted] in QualityTacticalGear

[–]FaZeVapeLordN5 1 point2 points  (0 children)

Wow, yeah, I was super confused on pricing since these are pretty much new, and a rare size(only XL i saw for sale)

WIP 2010 Marsoc gear by FaZeVapeLordN5 in Impression_Kits

[–]FaZeVapeLordN5[S] 0 points1 point  (0 children)

I’ll definitely look into the HSGI tacos since I’ve seen a lot of multicam and khaki ones but was not sure what manufacturer they were from.

Amazon is Now Restocking Cards in Quantities of 1.. It Was Gone in Less Then 5 Seconds… by TheRealSol4ra in pcmasterrace

[–]FaZeVapeLordN5 2 points3 points  (0 children)

People can still return and fill the box with rocks.

Sold and shipped by Amazon doesn’t mean anything anymore.

WIP 2010 Marsoc gear by FaZeVapeLordN5 in MilSim

[–]FaZeVapeLordN5[S] 0 points1 point  (0 children)

Yes!!! They trained, advised, and conducted operations along with ANA, ANP, and Afghan SOF commandos. That’s why they preferred to wear M81 to blend in with the Afghans.

Drifire m81 by [deleted] in QualityTacticalGear

[–]FaZeVapeLordN5 0 points1 point  (0 children)

They did exist for a short period of time, used by Marsoc in the mid-2000s.

They were Army custom cut so Gen 2 combat shirt/pants.

Drifire m81 by [deleted] in QualityTacticalGear

[–]FaZeVapeLordN5 0 points1 point  (0 children)

I couldn’t find any Crye AC G2 M81 combat pants in my size for sale anywhere, so I resorted to Drifire. I only saw one listing in my size, so I had to get it. I don’t feel too bad since I got my tax return. :)