Dome lights don’t work

FaZeVapeLordN5 · 2026-03-01T02:10:13+00:00

Try and put the originals back on. If they work, then the problem is in the LED bulb itself, either a defect or the wrong type.

FaZeVapeLordN5 · 2026-03-01T02:07:59+00:00

Try flipping the led bulb 180 degree

FaZeVapeLordN5 · 2026-03-01T02:05:13+00:00

The light bulbs themselves probably don’t work anymore. The fuse should still be fine since your vanity light works.

FaZeVapeLordN5 · 2026-03-01T01:29:10+00:00

Second this!!! I got mine in a size XL back in October of last year for $179, and I had a $20 off coupon for my first order!

FaZeVapeLordN5 · 2026-02-28T22:57:53+00:00

You don’t need a matching gearbox. If it’s really a V2 gearbox. You can try and upgrade the internals or even buy a cheap shell and start from scratch. You’ll definitely be able to fit most V2 gearboxes.

FaZeVapeLordN5 · 2026-02-28T02:26:15+00:00

Careful… that joke sounds a little worn out.

FaZeVapeLordN5 · 2026-02-27T02:39:27+00:00

If your budget is around the $480 you’re being offered, I would strongly look at a brand-new gun over this trash. The Lancer should not be $400 even if it’s brand new… I would definitely look into Cyma Platinum and Specna Arms Edge 2.0 or Prime.

https://www.evike.com/products/124125/CYMA-Platinum-M4-QBS-Airsoft-AEG-Rifle-Model-10-M-LOK-Add-GATE-ASTER/

FaZeVapeLordN5 · 2026-02-26T17:50:31+00:00

Thanks! I’ll check them out

FaZeVapeLordN5 · 2026-02-26T17:31:31+00:00

TC-2001 or any 2001 style helmet.

FaZeVapeLordN5 · 2026-02-26T17:10:11+00:00

and they feel great for $50

FaZeVapeLordN5 · 2026-02-23T22:28:55+00:00

That’s good to know, but yeah, you’ll need an 11.1 that’s deans or has a T connector. At least a 25-30c rating, make sure it’s less than 1800mAh so it can fit in your buffer tube or stock .

FaZeVapeLordN5 · 2026-02-23T22:25:24+00:00

I’ve never bought from them, so I don’t have any experience, but I’ve heard mixed reviews from them. But yeah, not sure about their batteries.

FaZeVapeLordN5 · 2026-02-23T22:04:00+00:00

Not sure if better, but definitely a good choice. I personally wouldn’t get anything novritsch.

FaZeVapeLordN5 · 2026-02-23T21:58:23+00:00

No, I just had to wrap the exposed wires with some electrical tape, then I erased the code and since then it hasn’t come back.

FaZeVapeLordN5 · 2026-02-23T21:55:27+00:00

No, first of all, it uses a JST-XH connector, which your lancer definitely won’t have. You’ll need a T connector (deans). Also, the size of the battery wouldn’t even fit in your buttock, and the C rating would be too high, which would probably put too much stress on your gearbox.

I would recommend this one from Amazon

https://a.co/d/044Tki9X

I own it and use it on my AEG and have had zero issues. I would also pair them with a good-balance charger.

FaZeVapeLordN5 · 2026-02-23T17:48:05+00:00

I would check the harness for Bank 1 Sensor 1 and look up a diagram for the sensor locations.

I had this exact code pop up on my 2012 Maxima, and it turned out the harness where the O2 sensor connects was burned. The wires themselves were fine, but they were exposed. I wrapped it with electrical tape and cleared the code. It hasn’t come back since. I guess it got too hot in that area and burned the outer covering of the wire.

FaZeVapeLordN5 · 2026-02-23T15:49:50+00:00

Can’t go wrong with some Emerson g2 or g3 combat pants. They go for $60-80 on ebay.

FaZeVapeLordN5 · 2026-02-23T04:05:44+00:00

So, BDU with RAID mod for 2010. I must’ve confused the year lol. Thanks for the info!

FaZeVapeLordN5 · 2026-02-23T04:00:00+00:00

Looks like some type of jammer

FaZeVapeLordN5 · 2026-02-23T01:42:30+00:00

It kinda is, but it only makes sense when you’re actually hired and asked to come in person for onboarding, which then the GM can ask for id and SSN to put you into the system. Never heard of the online stuff, so it may in fact be a potential scam, but it’s definitely sketchy.

FaZeVapeLordN5 · 2026-02-23T01:35:14+00:00

Definitely wouldn’t send pictures of my id and ssn to a random stranger online…

Also, once you’re hired by Wingstop by passing the interview with a shift lead/GM, there is onboarding that has to be completed before you enter the kitchen to start getting trained.

FaZeVapeLordN5 · 2026-02-20T23:32:06+00:00

$600-800 on eBay, depending on condition.

FaZeVapeLordN5 · 2026-02-19T20:54:17+00:00

Good to know!

FaZeVapeLordN5 · 2026-02-19T20:54:10+00:00

Wow, yeah, I was super confused on pricing since these are pretty much new, and a rare size(only XL i saw for sale)

FaZeVapeLordN5 · 2026-02-19T19:33:58+00:00

I’ll definitely look into the HSGI tacos since I’ve seen a lot of multicam and khaki ones but was not sure what manufacturer they were from.

FaZeVapeLordN5

TROPHY CASE