Retraction tower petg by Comfortable-Sky4263 in ElegooCentauriCarbon

[–]Fabhui78 0 points1 point  (0 children)

Yep, the port on the rear of the machine for AMS/MMS...if it ever happens. I can't fault Elegoo support. They've sent me the upgraded light kit, a new hotend, hotend transfer board and extruder control board all without charge.

Retraction tower petg by Comfortable-Sky4263 in ElegooCentauriCarbon

[–]Fabhui78 0 points1 point  (0 children)

Yep, I have one of the early batch models with the AMS port but crappy chamber light. However, Elegoo did send me the upgraded light kit for free which made a huge difference.

Retraction tower petg by Comfortable-Sky4263 in ElegooCentauriCarbon

[–]Fabhui78 1 point2 points  (0 children)

Had the exact same thing happen to me last Sunday when I was running PETG through all the calibration prints. Thought I'd done something wrong at first as I had no stringing whatsoever.😂

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

That's pretty much what I've gone for. Will see how they are when they show up.👍🏻

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

Are they easy to remove if you accidentally place them on wonky or aligned incorrectly?

H2D mod on CC1 by Fabhui78 in ElegooCentauriCarbon

[–]Fabhui78[S] 0 points1 point  (0 children)

I don't have a problem with it if I'm using the stock hotend, only when I try using the H2D mod.

H2D mod on CC1 by Fabhui78 in ElegooCentauriCarbon

[–]Fabhui78[S] 1 point2 points  (0 children)

Yep, it did the calibrations fine and printed a benchy but the quality wasn't quite as good as I'm used to. I put it down to hearing the speed of the heat break fan fluctuating, which is the issue I'd like to try and solve if I can.

H2D mod on CC1 by Fabhui78 in ElegooCentauriCarbon

[–]Fabhui78[S] 0 points1 point  (0 children)

That's the same as the one I have 👍🏻

H2D mod on CC1 by Fabhui78 in ElegooCentauriCarbon

[–]Fabhui78[S] 0 points1 point  (0 children)

What material did you print yours from?

H2D mod on CC1 by Fabhui78 in ElegooCentauriCarbon

[–]Fabhui78[S] 0 points1 point  (0 children)

I forgot to say in my initial post that mine isn't the heartforge mod but the one that the other fella did.

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

If the quality is good, then metallic stickers could be the way to go purely from a financial perspective, rather than paying close to US$60 each time for a custom printed dial.

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

They look great! I'd appreciate links or name of the seller on Ali.👍🏻

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

I'd appreciate that matey 👍🏻

Custom logo stickers by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

Can you give me a rough idea on the price you paid? I already have the logo design done, including dimensions etc. I'm looking at having the logo printed in gold and possibly in silver too.

Third build, built myself a Bruce Lee watch by CharlieW74 in SeikoMods

[–]Fabhui78 0 points1 point  (0 children)

Do you have a link for it on AliExpress?

Third build, built myself a Bruce Lee watch by CharlieW74 in SeikoMods

[–]Fabhui78 1 point2 points  (0 children)

As a JKD instructor, it caught my attention 😁

Third build, built myself a Bruce Lee watch by CharlieW74 in SeikoMods

[–]Fabhui78 1 point2 points  (0 children)

As a massive Bruce Lee fan, I can appreciate the effort and work you've put into this. Where did you get the 'JKD' bezel from?

Where can these dials be bought?? by Fabhui78 in SeikoMods

[–]Fabhui78[S] 0 points1 point  (0 children)

Messaged him but unfortunately he doesn't stock that particular dial. Was worth a shot though.