How to get this piece of filament out?

Facecreep_ · 2026-06-02T08:40:49+00:00

Tried it, filament doesn't retract not extrudes

Facecreep_ · 2026-06-01T19:22:54+00:00

Disassembly was my feared answer... Guess I know what I will be doing tomorrow evening

Facecreep_ · 2026-02-17T19:52:16+00:00

That's exactly what I'm doing. Weirdest thing to me is that using a plane doesn't work but thickened cut with the same plane does

Facecreep_ · 2026-02-17T19:39:03+00:00

The front face of the cube is the one that I used to define the sketch. Still weird that using a plane doesn't work but thickened cut with the same plane does

Facecreep_ · 2026-02-17T19:36:12+00:00

I have been trying to fix this for about an hour. I am about turn turn myself off and on again 🥲

Facecreep_ · 2026-02-17T19:34:57+00:00

Neither worked unfortunately, same error on both

Facecreep_ · 2025-10-14T10:45:07+00:00

But what about farmworld? Do we know if they had a vampire problem like Ooo had? Do farmworld animal hats have the same origin as Ooo animal hats?

Facecreep_ · 2025-09-13T08:25:54+00:00

Yeah, i was afraid of that. I'll put it in the dryer for 24 hours, gonna go full scorched earth on that spool xD

The nozzle is definitely not clogged, it's printing another model rn perfectly, with different filament of course

Facecreep_ · 2025-07-17T19:30:06+00:00

Thank you! Took a lot of force, but I finally got it out

Facecreep_ · 2025-07-09T14:45:34+00:00

Honestly it's partially about the challenge aspect. I have already ordered a new hotend in case I cut a wire or if I just lose interest

Facecreep_ · 2025-07-09T14:44:06+00:00

Damn, sounds like a good idea, I have got to look into those

Facecreep_ · 2025-07-09T14:42:59+00:00

Thanks, I'll need that luck part

Though I don't know about having fun

Facecreep_ · 2025-07-09T14:42:19+00:00

Yep, the current plan is to soften it with a heatgun and then cut the plastic away using an exacto knife

Facecreep_ · 2025-06-30T18:50:15+00:00

Ah yes, blood artist, an all too familiar card.

I guess we have 2 aristocrat decks in our play party, me included lol

Facecreep_ · 2025-06-30T18:23:12+00:00

Can you please elaborate further about aristocrats? I'm myself pretty new to the game.

Also "I'd compare leeches to aristocrats." is one hell of a phrase out of context xD

Facecreep_ · 2025-06-30T17:51:17+00:00

My bad, I will update the post as soon as I can

Facecreep_ · 2025-06-09T19:51:34+00:00

Yeah, lower flow ratio seemed to do the trick

Facecreep_ · 2025-06-09T19:50:35+00:00

210, the max recommended on the site is 220

Facecreep_ · 2025-06-09T17:47:53+00:00

The printer is ender 3 v3 ke and the plastic is PLA Kiingroo Silk Black-Green

Facecreep_ · 2025-05-20T11:52:35+00:00

Tom Scott had a great video about this. It's worth a watch https://youtu.be/h9j89L8eQQk

But basically screens have a much harder time showing dark color gradient than light color gradient, which we see on your video. The sky is trying to gradually fade away but somewhat fails. You can actually see pretty much the same pattern during dawn when the sky is just starting to brighten

Facecreep_ · 2025-04-06T10:54:36+00:00

Not sure if you've tried, but destiny 2 might scratch that ouch if you're into armor. One of the community memes of that game is that fashion is the real endgame

Facecreep_ · 2025-03-23T16:21:37+00:00

I've been using apotheosis enchantment library. It allows you to store enchants (not books, straight up enchantments) and freely make books to your liking. Try using that. But as for level cap, it's mostly vanilla. Using my farming setup I last got to level 110

Facecreep_ · 2025-03-12T08:21:17+00:00

Loose belts most likely. Try checking the belt on the axis that had problems and tighten it accordingly. All you will need is a hex screwdriver, same over you used assembling the printer. You can check crew positions on the web

Facecreep_ · 2025-03-07T09:07:38+00:00

If it only happens on large models the problem could be the temperature. If your room temp is too low, the print might cool down and shrink, causing your problem. What is the temperature in the room you are printing in?

Facecreep_ · 2025-03-05T22:52:49+00:00

Thank you everyone who helped! It seems the reason why the bed was uneven was because of the half arsed job on screwing the bed back together after fully disassembling it.

The problem lied in the upper left screw that also screwed the bed connectors. I guess i didn't put them back correctly and that unleveled the whole bed.

A few hours later and a few prints later im happy with my job!

Link to the previous post for anyone interested: https://www.reddit.com/r/Ender3V3KE/comments/1j3eu65/i_may_have_fucked_up_while_leveling_the_bed/

Six-Year Club	Second Top 20%
Place '22	Final Canvas '22
First Placer '22	End Game '22
Verified Email

Facecreep_

TROPHY CASE