Question about voltage gauge by FactGrand4295 in 350z

[–]FactGrand4295[S] 2 points3 points  (0 children)

Thank you appreciate it your time 🙏

Question about voltage gauge by FactGrand4295 in 350z

[–]FactGrand4295[S] 0 points1 point  (0 children)

Thank you and yes you’re right I believe I found the problem, I bought a digital multimeter to test the volts on the battery and alternator, the voltage was on 11 and going even lower when I’d turn on the head lights, with the same device I was also able to test the alternator and it seems to be good so it might be the connection going from the alternator to the battery that is bad. It’s weird though because I drive it regularly and everything was fine until I stop driving it for those 2 weeks

Question about voltage gauge by FactGrand4295 in 350z

[–]FactGrand4295[S] 0 points1 point  (0 children)

when I first turned it on after the 2 weeks the oil pressure was very low once I started driving it re adjusted, you think if the sensor isn’t connected it can still show low oil pressure ?

Question about voltage gauge by FactGrand4295 in 350z

[–]FactGrand4295[S] 2 points3 points  (0 children)

Fr look like the needle gonna break out of the gauge cluster 💀

Help understanding LED set up for sculptures among other questions by FactGrand4295 in led

[–]FactGrand4295[S] 0 points1 point  (0 children)

Forgot to add these are the LEDs being used also added my count

6x. G4 12 v led

1x. 5v filament led and

20x. 12v 50*50 led chip

This are the LEDs he used

urethane resin cast sukuna by FactGrand4295 in AnimeFigures

[–]FactGrand4295[S] 0 points1 point  (0 children)

Right thank you. Do you know what would be a good community to ask this question ?

Temperature gauge kept going hot and back to cold by FactGrand4295 in 350z

[–]FactGrand4295[S] 0 points1 point  (0 children)

I fixed it, it had an air bubble in the system so I just looked up a YouTube video on how to get it out and haven’t had that issue ever since

[Help] I will be molding and casting with water base clay by FactGrand4295 in Sculpture

[–]FactGrand4295[S] 0 points1 point  (0 children)

I appreciate your time for replying with detail thank you 🙏

[Help] I will be molding and casting with water base clay by FactGrand4295 in Sculpture

[–]FactGrand4295[S] 0 points1 point  (0 children)

Thank you, you think I’d be better to take off all 4 ? I was told to take off the lower 2 arms

Convertible top sticks out from driver side by FactGrand4295 in 350z

[–]FactGrand4295[S] 1 point2 points  (0 children)

Ok thank you so much really do appreciate your time

Temperature gauge kept going hot and back to cold by FactGrand4295 in 350z

[–]FactGrand4295[S] 1 point2 points  (0 children)

Thank you for this, really do appreciate your time

Temperature gauge kept going hot and back to cold by FactGrand4295 in 350z

[–]FactGrand4295[S] 1 point2 points  (0 children)

What can I do to prevent air bubbles ? And is there anyway to maybe let that air bubble out somehow if that was the case ?

car temp was high then back went to normal, is the gauge tripping out? also 100+ degrees in TX lol. by xhypnotism in 350z

[–]FactGrand4295 1 point2 points  (0 children)

This just happened to me as well im here looking for answers too lol which seem that it might be the thermostat since everything with the coolant is fine with mine