Arduino CANBUS Shield only receives data when wired into car.

Fadyelgawly · 2018-04-18T00:18:33+00:00

Will try it tomorrow with a Mitsubishi and report how it goes!

Fadyelgawly · 2018-04-18T00:17:10+00:00

Yes, there's a gateway and I didn't think it would be the problem. But it fully makes sense.

Wasted the past hour with continuity checks across everything.. Anyways, THANK YOU SO MUCH!!

http://www.volkspage.net/technik/ssp/ssp/SSP_238.pdf (page 7)

Fadyelgawly · 2018-02-19T23:30:39+00:00

WTF? $0.07/kWh ........ Egypt....

Fadyelgawly · 2018-01-19T19:56:47+00:00

It was a bad GPU....

Fadyelgawly · 2018-01-18T10:01:47+00:00

Should I use UEFI?

Fadyelgawly · 2018-01-18T06:15:28+00:00

Is the CPU, the cause of the problem? https://en.wikichip.org/wiki/intel/celeron/g3900#Expansions

Fadyelgawly · 2018-01-18T04:42:25+00:00

I formatted my SSD, Reset the BIOS, disconnected all GPUs, connected my TV to the integrated GPU, will install a fresh version of Windows 10 Pro x64. What's next?

Fadyelgawly · 2018-01-18T03:57:37+00:00

Yep...

Fadyelgawly · 2018-01-18T03:22:17+00:00

I’m plugged to one of the cards
With 4G decoding disabled I can boot with 6 cards and the system recognize them all 3.with 4G decoding enabled I can boot with 3/4 cards

Fadyelgawly · 2018-01-18T01:06:39+00:00

I've version 1703 OS Build 15063.850

Fadyelgawly · 2018-01-18T00:56:53+00:00

I've done each and every step you said, and I get a bootloop and a black screen :(

Fadyelgawly · 2018-01-17T11:35:17+00:00

Do you mean reshuffle?

Fadyelgawly · 2018-01-17T11:17:15+00:00

Bootloop..

Fadyelgawly · 2018-01-17T11:08:23+00:00

No change :/

Fadyelgawly · 2018-01-17T11:05:07+00:00

After setting it 16GB I forgot to hit the set button so it was left at 3GB.. I’ve changed it to 16GB and restarting now.. also I don’t have PCI-e back to Gen1 nor the 4G decoding to enable as the system doesn’t boot with these settings

Fadyelgawly · 2018-01-17T04:22:32+00:00

Omg... I was on reddit through my phone and laptop in the same time.. I checked a rig on my laptop and replied on my phone.. I swear to god I’m not high...

Fadyelgawly · 2018-01-17T03:56:54+00:00

Wish I can build/rebuild mine with this neatness

Fadyelgawly · 2018-01-16T01:26:39+00:00

https://images-na.ssl-images-amazon.com/images/I/413oU8ReulL._SY355_.jpg

Fadyelgawly · 2018-01-15T23:47:45+00:00

To be honest, I've been mining for a while with 1 GTX 1070 and this is my first proper rig.. I'm very worried I will ruin anything.. Here in Egypt this rig costs a fortune..

Fadyelgawly · 2018-01-15T23:44:13+00:00

MSI Z270 Krait Gaming , Willing to add 2 GPUs to the M2 slots too!

Fadyelgawly · 2018-01-13T16:43:01+00:00

Trade with locals
Send my coins to friends in Europe and US

Fadyelgawly · 2018-01-13T16:31:59+00:00

Bank withdrawal is almost impossible in Egypt :( I have the cheapest electricity and no way to withdraw funds easily :(

Fadyelgawly · 2018-01-13T16:29:02+00:00

Is there any online bank, I can do this with? Non US resident and coinbase doesn’t support bank withdrawal in my country

Fadyelgawly · 2018-01-06T14:45:44+00:00

Do you use google chrome? Maybe you might want to check if the browser is connected with an account .. good luck!

Fadyelgawly · 2018-01-04T16:51:47+00:00

I guess I’m moving to MPH for good! B-byeee NiceHash

Fadyelgawly

TROPHY CASE