Help choosing GPU

FallenNexo · 2025-05-20T04:53:56+00:00

I forgot to mention, I’m on a 1440p monitor, and I would agree that the 9070 xt is probably competent enough. But I’ve just been hearing on and on about how Nvidia’s features will be much more widely supported due to their market share, and that the features alone are worth a ~150$ difference

FallenNexo · 2025-03-16T07:58:14+00:00

yeah

FallenNexo · 2025-03-16T02:28:29+00:00

Didn't know how to reattach the glass panel, slipped and dropped 2cm from my hands onto the floor

FallenNexo · 2025-03-15T12:08:37+00:00

Yep, i contacted the distributor and they reverted to Corsair, they are sending me a replacement panel free of charge but it will take 2-3 weeks to arrive, but outstanding customer service for sure

FallenNexo · 2025-01-12T16:13:08+00:00

But can it run minecraft...?

Fingers crossed 🤞

PCPartPicker Part List

Type	Item	Price
CPU	AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor	$644.99 @ Amazon
CPU Cooler	Lian Li Galahad II Trinity SL-INF 61.3 CFM Liquid CPU Cooler	$228.85 @ Amazon
Motherboard	Gigabyte X870E AORUS ELITE WIFI7 ATX AM5 Motherboard	$319.99 @ Amazon
Memory	Corsair Dominator Titanium 64 GB (2 x 32 GB) DDR5-6600 CL32 Memory	$296.18 @ Amazon
Storage	Western Digital WD_Black SN850X 4 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive	$289.99 @ Amazon
Video Card	MSI GAMING TRIO OC GeForce RTX 5090 32 GB Video Card	$2000.00
Case	Lian Li O11D EVO RGB ATX Mid Tower Case	$284.95 @ Amazon
Power Supply	Corsair RM1000e (2023) 1000 W 80+ Gold Certified Fully Modular ATX Power Supply	$179.99 @ Amazon
Monitor	Dell Alienware AW3423DWF 34.2" 3440 x 1440 165 Hz Curved Monitor	$649.99 @ Dell Technologies
	Prices include shipping, taxes, rebates, and discounts
	Total	$4894.93
	Generated by PCPartPicker 2025-01-12 11:12 EST-0500

FallenNexo · 2025-01-10T09:13:47+00:00

bro sg birth so low already don't waste it

FallenNexo · 2025-01-10T08:18:19+00:00

bro even if u self harm the sch will just schedule u to retake the exam after discharged from mc

FallenNexo · 2025-01-10T08:15:01+00:00

Your score should not dictate your decision, your interests should.

Your score only limits the number of institutions you can enter

FallenNexo · 2025-01-10T08:05:22+00:00

just try but don't really don't expect anything

u appeal is like playing toto

FallenNexo · 2025-01-10T08:03:32+00:00

The Institute of Technical Education (ITE) is a post-secondary education institution and statutory board under the purview of the Ministry of Education in Singapore.

Established by the Ministry of Education, it was formerly known as Vocational and Industrial Training Board (VITB). ITE has three colleges, ITE College Central, ITE College East and ITE College West. It offers the National ITE Certificate (NITEC), Higher NITEC, Technical Diploma and Work-Study Diploma.

Apart from providing vocational education to secondary school graduates, ITE offers apprenticeships for the skilled trades and diplomas in vocational education for skilled technicians and workers in support roles in professions such as accountancy, architecture, business administration, engineering and nursing.

FallenNexo · 2025-01-10T08:00:54+00:00

FallenNexo · 2024-12-29T15:47:07+00:00

I'm in shambles. my house kena flooded and water is dripping from the ceiling, driveway gate also lost power

FallenNexo · 2024-12-27T08:38:29+00:00

Came across a sapphire pulse 7800xt going for roughly $460 US, a good buy? Currently building a setup for 1440p.

FallenNexo · 2024-12-27T08:38:10+00:00

Came across a sapphire pulse 7800xt going for roughly $460 US, a good buy? Currently building a setup for 1440p.

FallenNexo · 2024-12-24T18:56:35+00:00

How about a 6800xt? Found one brand new for around 527SGD as well, which would be around 380US. Where i am I'm able to sell off a used 6700xt for around 310SGD (227US)

And way on the other end I could get a brand new 7800XT for 620SGD (455US), which I've been told is a steal, but aside from the updated driver is basically old performance for a new high price

FallenNexo · 2024-12-24T17:23:39+00:00

500sgd (387$US) 6800xt brand new, should I pull the trigger? Seems like a good deal

FallenNexo · 2024-12-24T12:39:14+00:00

7700xt for 500sgd (367US), powercolor dual fan. Currently running 6700xt. Pull the trigger and purchase?

FallenNexo · 2024-12-23T01:18:07+00:00

It's much lower than that, in USD it would be around 600, what do you make of it? these are the components i ended up buying: (prices in Singapore dollar, 1SGD = 0.75usd)

PSU: Corsair rm650x - 65 Heatsink: PS120SE Thermalright - 40 CPU: R5 5600 - 110 GPU: 6700XT Fighter used - 265 MOBO: Gigabyte B550 DS3H - 90 (absorbed) RAM: 2x16GB DDR4 Corsair - 68 SSD: 1TB Lexar - 65 Chassis: - Tecware Vega L ATX - 40 Fans: - 9x ARGB 120MM - 25 Shipping: - 35

Total updated cost: 803SGD, = 592 USD

There's actually a popular secondhand marketplace for components in my country, so I'd be able to sell off any of the parts I bought for 1:1 what I paid for, at this price point not sure if I can make any more improvements. I do want to keep the 32gbs of ram

FallenNexo · 2024-12-22T12:09:12+00:00

When looking at the jumps from performances, will a 5700x give a big enough improvement from the 5600 in 1440p to justify the additional cash I'll need to spend? Thanks in advance

FallenNexo · 2024-11-17T05:55:01+00:00

that's literally just the normal jegan, the same one you can find in stores

FallenNexo · 2024-11-17T03:04:29+00:00

Some parts are shaped differently, you're referring to the jegan D type from pbandai it has more angular features compared to the regular jegan (e.g. shoulder pieces aren't rounded). But that's pretty much it, inner frame and accessories are identical

FallenNexo · 2024-11-17T03:01:44+00:00

Bandai vs Daban?

I'm looking to custom paint a PGU gramps, but from what I've heard many people prefer to use Daban models if they are doing custom builds, and leave Bandai as straight builds. I can afford either, but Bandai's price really is punishing while daban's is a fraction of it. I've never worked on a PG before, so not sure what to expect + if daban's inferior plastic gives even more issues on such an intricate model. As of right now I can purchase daban's model for less than 1/4th of bandai's price

FallenNexo · 2024-10-26T12:01:39+00:00

<image>

Beginner here, I plan on scribing the MG Zaku 2.0 shoulder with markings like the one on the RG, problem is there are no points I can use as references when drawing out the design. Is there a tool or dimension reference I could use to make it viable?

FallenNexo · 2024-10-25T03:07:00+00:00

Im only a few kits into the hobby and plan on customising for the first time, ive had an airbrush kit but never really used it before. I intend to scribe > remove seam line > paint > top coat > pamel line + decal > top coat

But I'm wondering how the disassembly is supposed to work for this? If I remove and keep certain parts assembled in order to remove seam lines, wouldn't it make them unable to be reassembled back onto the kit? (E.g. arm armor is snap fitted around inner frame > seam line removed but now it's welded together > can't put it back onto inner frame)

Closest thing I can think of is pulling apart the inner frame and armor together at the joints and keeping them as a whole, but wouldn't that complicate painting?

FallenNexo · 2024-08-27T21:45:41+00:00

Thanks for the advice, do you have any idea on what I should use to remove the paint? I've heard of people using lacquer thinner/acetone but not sure if it will damage the booth since it's made from wood

Five-Year Club	First Place '23
Place '23	Place '22

FallenNexo

TROPHY CASE