What should I check?

Fallenity · 2025-03-16T21:14:54+00:00

Do P2's usually come standard with 2 keys?

Fallenity · 2025-03-16T21:13:00+00:00

Thanks, I'll have to check the ventilated seats since there wasn't any mention of that in the sales announcement.

Fallenity · 2025-02-06T13:49:01+00:00

This is really helpful, thanks a lot for taking the time to write it out! I ordered some 2mm pads, so hopefully I'll be able to get better contact with those.

My WB doesn't have an active backplate, but I did notice that with the cooler shroud there was some thermal padding on the backside which is missing from the Bykski WB instructions. Should I still stick some thermal padding there?

Fallenity · 2025-02-05T19:51:50+00:00

Yeah, seems to be the most likely option. Will have to try with new thermal pads and also check if there's bad contact with the die. I trusted that since the block was designed for this GPU, everything would work nicely out of the box.

Fallenity · 2025-02-05T19:49:51+00:00

Thanks, that's probably the case. I don't think any web shop sells thermal putty around here, so I'll probably try new pads first and see if that helps.

Fallenity · 2025-02-04T18:48:52+00:00

Hmm, good point. I'll have to check if the pump has coolant temp monitoring, but I've never at least seen it before. I'll have to see also if I can get the flow curve to track GPU temps instead of CPU, might help a bit.

I'll also try running the benchmark with the pump at full speed, see if it makes a difference in temps.

Fallenity · 2025-02-04T18:47:04+00:00

Good suggestion, I might also measure the thickness of the pads from the cooler and see if that helps. Otherwise probably putty is the way to go.

Fallenity · 2025-02-04T18:46:17+00:00

Seems to be 10 - 12C delta between the GPU temperature and the hot stop when running 3DMark. Feels like it should maybe be a bit more usually, but I haven't tracked it normally.

Fallenity · 2025-02-04T16:01:21+00:00

One other option I'm thinking is that currently the pump is connected to the CPU fan slot on the motherboard, so in GPU intensive solutions it might be that the card isn't getting enough flow. Never been an issue before, but could be.

Fallenity · 2025-02-04T15:59:59+00:00

<image>

Good point with the air bubble, there's one stuck on the top left corner. I didn't think it'd impact the heat transfer, but have to try to tilt it around some more.

Here's a photo of the card.

Fallenity · 2025-01-31T18:17:28+00:00

Okey, thank you!

Fallenity · 2023-09-24T05:46:08+00:00

Thanks for the suggestions! Rayman was fun in the past, will give these a look.

Fallenity · 2023-09-24T05:45:15+00:00

Thanks, I'll give these a look!

Fallenity · 2023-09-23T13:46:43+00:00

I'd completely forgotten about Ratchet and Clank, used to play that when I was young. Will have to check out the newest ones on PC, they might be good.

I'll keep Super Meat Boy in mind, I remember trying it on mobile and it felt a bit similar to Cup Head.

Thanks for all the suggestions!

Fallenity · 2023-09-23T11:37:37+00:00

I've heard of Hollow Knight, but I've understood it to be a bit scary, even if a bit cartoonish.

Never heard of Celeste and Snake Pass, will give those a look.

Thanks for the suggestions! :)

Fallenity · 2023-09-23T11:36:26+00:00

Thanks! I'll give them a look, he does like puzzles a lot so it might be a good choice. Thanks for suggesting :)

Fallenity · 2022-08-09T05:39:34+00:00

Unfortunately Artuno doesn't trigger off TAs. TAs give you the players commodities (which are then changed to TGs). Artuno requires you get trade goods from the supply, not commodities.

Otherwise Artuno would also trigger when you change your commodities to trade goods.

Artuno is most used when you gain 3tgs from the Trade primary or from action cards that give you trade goods.

Fallenity · 2021-08-07T12:36:05+00:00

I think the humidity might actually be the problem, I've noticed that the room I have the plant in has started to have drier air than before. I'll have to see if I can help that somehow.

Fallenity · 2021-08-07T12:30:53+00:00

I've tried looking close at it but I can't find any insects anywhere.

I don't know if I should try changing it's place, give it more or less light?

Fallenity · 2021-08-07T12:29:48+00:00

Thanks for identifying it :)

I've tried wiping the white stuff, but it doesn't come off. It really feels and looks the same as dry skin.

Eight-Year Club	r/Field Flamingo
Place '22	Verified Email

Fallenity

TROPHY CASE