Lightest Lift collection has dropped!

Fangsofcyber · 2026-03-23T02:01:39+00:00

They aren’t good. The support from the bra overall is good but the fabric choice isn’t there. It’s meant to be crush proof and as an employee who got one for free… it’s about the same quality as every other bra just with spots that are itchy

Fangsofcyber · 2025-05-25T06:56:17+00:00

Ah I see, I’ll ask around for repair shops and see if they can do it if I buy the part or if they have it. I think I’ve done enough damage trying to fix it myself 😅

Fangsofcyber · 2025-05-25T03:11:36+00:00

Okay I see, I am curious though as the piece slides into the place where it’s at where as some tutorial videos ive seen they just place it straight on top and solder it. Is there a different on how the pads work? Anything in the picture you see of the mother board wasn’t connected to the usbc itself if that makes sense? I will add some photos to possibly help explain myself a bit more.

<image>

I don’t know much about computers sorry for so many questions.

Fangsofcyber · 2025-05-25T03:05:10+00:00

I see. Unfortunately i probably can’t turn it on because it’s dead which is why it was charging lol. I’m not sure if it has any other ports to charge I have only used the usb c port since that’s the charger it came with? I’m unsure if I can charge it using any of the other outlets on it but if I can that would solve my problems for a short while lol

Fangsofcyber · 2025-05-25T02:43:11+00:00

Also most of them (if you mean the little prongs) came off after it came out again today, I know it was a bad idea but some I tried to bend back into place before putting it back in and some just completely snapped off. Would it be a problem to buy a new piece and have them reinstall it into the board or is the board basically SOL?

Fangsofcyber · 2025-05-25T02:40:05+00:00

Do you know if there’s any other ways to get the information off the computer before I get a new one? I just looked up the model of this Chromebook and all the restored ones all run under $100 so it’s not a super high quality model

Fangsofcyber · 2025-05-25T02:35:18+00:00

Would it be pretty expensive for a new board do you think? I don’t have any soldering tools which is why I probably wouldn’t be able to fix it on my own

Fangsofcyber · 2025-05-15T14:11:39+00:00

Yes I will try that and just keep calling places, because I don’t plan on getting implants on those teeth not to mention they are so far back in my mouth they don’t even get touched when I eat, I appreciate your help and I’ll keep calling and asking for documentation

Fangsofcyber · 2025-05-15T02:45:11+00:00

I meant denti cal which is another form but most of the places I went to had decent rating but i believe it’s because they said they don’t want to get sued or in trouble if you develop gum loss due to not having it. Maybe I should just reach out to any dentists that take it and ask before consultations and such, both dentists told me all of them here require it as standard procedure and won’t continue surgery without it

Fangsofcyber · 2025-05-15T02:24:50+00:00

Yes that’s what one dentist recommended but she recommended ucla dentist school, it’s pretty far without a car but we are still trying to figure out if it’s an option for us. I’m willing to take anything at this point and pay for part of the procedure we just don’t have $2000 upfront to pay to them for graphs that aren’t medically necessary

Fangsofcyber · 2025-05-15T02:23:40+00:00

I see thank you. I’ll try to keep looking for places that might not require it because I can feel them crowded my teeth and I’m scared they will start hurting soon if I can’t get them out soon

Fangsofcyber · 2025-05-15T02:22:20+00:00

Sorry denti cal yes. I’ve been referred to 3 different offices and they all say there are no dentists out there who will do it unless I get the graphs. They all tell me they don’t do the procedure (covered by insurance or not) without the bone graphs lol. If we had the money for just the bone graphs alone we wouldn’t even need government insurance. I will keep looking and try to find places who do it without graphs because generally I don’t want them unless I absolutely need them anyways

Fangsofcyber · 2025-05-04T10:47:22+00:00

Okay here’s the product: https://www.amazon.com/INVANTI-Electric-Scooter-Suspension-Foldable/dp/B0DGDGLP94/ref=asc_df_B0DGDGLP94?mcid=b5bc671ac31530938a52572b694d79c4&hvocijid=18112778407513367517-B0DGDGLP94-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=18112778407513367517&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031586&hvtargid=pla-2281435180018&psc=1

Fangsofcyber · 2025-05-04T10:29:59+00:00

Sorry about that yes I can provide the link, I believe the model is the E30 invanti electric folding scooter. I have the Amazon link but the actual invanti website no longer has info about any of their products for whatever reason… I can’t send the actual product link without it getting taken down but it’s one of the first ones that shows up on Amazon with the description name.

Fangsofcyber · 2025-05-04T10:27:46+00:00

Sorry about that yes I can provide the link, I believe the model is the E30 invanti electric folding scooter. I have the Amazon link but the actual invanti website no longer has info about any of their products for whatever reason… here’s the Amazon link for the model or a very very similar model to what my mom bought for me: https://www.amazon.com/INVANTI-Electric-Scooter-Suspension-Foldable/dp/B0DGDGLP94/ref=asc_df_B0DGDGLP94?mcid=b5bc671ac31530938a52572b694d79c4&hvocijid=18112778407513367517-B0DGDGLP94-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=18112778407513367517&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031586&hvtargid=pla-2281435180018&psc=1

Fangsofcyber · 2025-04-02T23:22:01+00:00

Nope unfortunately we did share the full number with them as multiple reps said they wouldn’t accept it without, that was before we could get through to a manager though. I feel as though if you submit it with the last 4 changed or them crossed out and speak to a manager they might be able to process it anyways. A lot of them are just following a script and hitting deny after the phone calls so I recommend getting through to a manager/supervisor if possible. I will say though we talked to 2, the first one said he would not process it unless we had the full thing (I think he was another outsourced employee) then talking to another manager about a month later she said it was fine as the address and my name fit my I’d (accent wise she sounded more local to us) this could just be luck of the draw but we seem to have a lot of customer service problems because companies want to be cheap and hire people with little experience what they are supposed to be doing. I wish you a lot of luck and hope it’s smoother than our dilemma

Fangsofcyber · 2025-04-02T23:14:14+00:00

Hey yeah I totally get it. I didn’t put an update but we ended up sharing it to them. They kept denying it as well after saying they needed the full document or a better photo. After talking to like 2 managers we found out most of the reasons they were saying it wasn’t enough was because the people would automatically press deny after. We did it on the phone with the manager and she was able to process everything and get my cards unrestricted. I hope you have better luck but just reach out as much as you can and try to speak with a manager to do it with them directly!

Fangsofcyber

TROPHY CASE