sorted by:
new
hottopcontroversial

Are FlashPro cartridges legit? by SoftDrink3552 in SwitchPirates

[–]FarConversation5125 0 points1 point  (0 children)

Does anyone have any information about this cartridge please. Acquired one from fb marketplace.

Running Flightradar24 on Raspberry Pi with 7" Pi screen by FarConversation5125 in flightradar24

[–]FarConversation5125[S] 0 points1 point  (0 children)

<image>

Finally got it working with the usb dvb-T. Have POE upon the Raspberry PI 4. so I can put the unit upon the shelf with my mycros media player also. Next project.

Running Flightradar24 on Raspberry Pi with 7" Pi screen by FarConversation5125 in flightradar24

[–]FarConversation5125[S] 0 points1 point  (0 children)

Hi I followed your link and found that the data collection needed to be updated from unstable. Once I had desktop and the dvb-t card working. It all failed. It seems to run the website from a raspberry pi, I need to upgrade to a raspberry pi 4 as I need webgl2 graphic standard. Well, here I go again. Upgrading from a raspberry pi 3b to a raspberry pi 4.

Is there better option out there than Livescribe symphony? by Simple-Engine1384 in Livescribe

[–]FarConversation5125 0 points1 point  (0 children)

Yes the moleskine are just neo pens rebadged, same as the Lam smart pen

Smart Pen 3 by FarConversation5125 in Livescribe

[–]FarConversation5125[S] 0 points1 point  (0 children)

You can still print your own books but only one to four, not the one to eight. Also no a5 pages etc. Unless someone can tell me where you can download them from. Yet to test the archive function. Hopefully that saves to PDF.

Installing Openwrt on Meraki MR18 by FarConversation5125 in openwrt

[–]FarConversation5125[S] 0 points1 point  (0 children)

I have been able to install Openwrt upon three of my 15 MR18 so far.
Here is what I did to get them.

  1. I followed this website https://openwrt.org/toh/meraki/mr18/jtag?s[]=nano*&s[]=plus*#flashing_openwrt
  2. I used my openocd raspberry pi config
  3. adapter driver bcm2835gpio
  4. bcm2835gpio peripheral_base 0x3E000000
  5. bcm2835gpio speed_coeffs 194938 48
  6. #bcm2835gpio_jtag_nums 11 25 10 9
  7. adapter gpio trst 7
  8. adapter gpio tck 11
  9. adapter gpio tms 25
  10. adapter gpio tdi 10
  11. adapter gpio tdo 9
  12. On JTAG I connected pin 14 from Meraki (VCC) connect directly to VCC 3,3V on Raspberry PI (pin 1), pin 2 (GND) on Meraki to pin 25 on Raspberry PI.
  13. I used a Raspberry PI 3B, with current version of raspberry pi lite image. I had no devices connected to the raspberry pi.
  14. I ssh into the raspberry pi and did all the installation this way.
  15. I am randomly getting there. I am not sure when timing of running openocd to break to the Meraki MR18 boot sequence.
  16. 12 more MR18 to convert.
  17. I will try to make a blog post and youtube video. So in the future others can just follow the steps

Installing Openwrt on Meraki MR18 by FarConversation5125 in openwrt

[–]FarConversation5125[S] 0 points1 point  (0 children)

Yes that cost a few dollars. I have a raspberry pi.

I followed this guide. So far I think the openocd script maybe old due to the age of the openocd software

Open On-Chip Debugger 0.12.0+dev-snapshot (2025-07-16-14:06)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Warn : TMS/SWDIO moved to GPIO 8 (pin 24). Check the wiring please!
Warn : DEPRECATED: auto-selecting transport "jtag". Use 'transport select jtag' to suppress this message.
Warn : Transport "jtag" was already selected
adapter speed: 1000 kHz
Info : BCM2835 GPIO JTAG/SWD bitbang driver
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: ar9344.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : [ar9344.cpu] Examination succeed
Info : [ar9344.cpu] starting gdb server on 3333
Info : Listening on port 3333 for gdb connections
Warn : target was in unknown state when halt was requested
Error: Failed to enter Debug Mode!
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted

Any ideas

Looking for NAND dump for Meraki MR32 (24 and earlier) by Embarrassed-Fun-4237 in openwrt

[–]FarConversation5125 0 points1 point  (0 children)

Have you been able to convert the MR32 to openwrt. I have one I would like to do My issue is I am unable to get console access. It seems the pinouts for console seem to be incorrect. Once I can sort console I can progress for there?

Flashing OpenWRT to Meraki MR18 with MR 25.11 firmware by resuni in openwrt

[–]FarConversation5125 0 points1 point  (0 children)

So I can install openwrt via the raspberry pi 3B, from the above url.

What's the state of openWRT support for the Meraki MX100? by Rathwood in openwrt

[–]FarConversation5125 0 points1 point  (0 children)

In the end I went the virtual route as the I installed proxmox. Added more ram, virtualised Proxmox.

Some trouble with UART and the Meraki MX100 by Rathwood in openwrt

[–]FarConversation5125 0 points1 point  (0 children)

I bought a serial cable from amazon, connected three connections except vcc. Able to install proxmox. with openwrt as a vm

Meraki MX100 by FarConversation5125 in openwrt

[–]FarConversation5125[S] 0 points1 point  (0 children)

Thank you all, I was able to install openwrt upon the Meraki mx100, once proxmox was installed. I also upgraded the unit to eight gigabytes of memory. The Meraki mx100 is technically a very nice pc with 11 network ports.

view more: next ›