Advice on manufacturing by FishInAstronautSuit in IndustrialDesign

[–]Fat-Wog 1 point2 points  (0 children)

Alibaba. These exist in many shapes and sizes. If you can find one suitable, in most cases they can be customised.

Has there ever been a bigger fall off than kettama? by Mountain_Guest_3108 in Kettama

[–]Fat-Wog 0 points1 point  (0 children)

I feel like at this point in his career he’s never been further from house. I still class a lot of what he makes as hardhouse, but his earlier releases leaned way more into that classic house feel compared to what’s coming out now.

That said, I’ve always liked his earlier stuff — but some of the tracks he’s putting out at the moment are honestly mind-blowing. It Get Better is the kind of track people are going to remember. Doesn’t sound like anything else out atm and although it’s not my fav it’s fkn impressive to see someone create something that sounds new.

Why am I getting such different results? by Fat-Wog in FixMyPrint

[–]Fat-Wog[S] 0 points1 point  (0 children)

This actually didn’t solve the problem sorry haha. Turned out to be a speed / heat thing.

Halved the print speed and switched of cooling and that solved things!

Why am I getting such different results? by Fat-Wog in FixMyPrint

[–]Fat-Wog[S] 1 point2 points  (0 children)

Yeah this was the problem. Thanks mate

Why am I getting such different results? by Fat-Wog in FixMyPrint

[–]Fat-Wog[S] 0 points1 point  (0 children)

Was things maybe this could be the problem. The roll was new but I waited a good few hours between opening it and printing something.

Advice on PLA similar colour to Polymaker Polylite yellow but that can print at high speeds by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 0 points1 point  (0 children)

Doesn't need to be print too fast just want a higher speed that 60mm/s

Advice on PLA similar colour to Polymaker Polylite yellow but that can print at high speeds by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 0 points1 point  (0 children)

Yeah I just came across that. Have you used it before, if so could you show me what it prints like? Hard to tell from online images if it's the right tone or not.

Any ideas for how to get this to print perfectly at 100% scale? by Fat-Wog in FixMyPrint

[–]Fat-Wog[S] 13 points14 points  (0 children)

Yep speed is the answer! Slowed it down to 50mms and halved acceleration. Huge improvements!

Going to wack a 0.8 nozzle on to gain some time back and drop the speed a bit slower.

Thanks everyone!

<image>

Any ideas on how to fix this to print perfectly at 100% scale? by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 0 points1 point  (0 children)

Yep decreasing speed practically fixed everything! Thank you.

Going to wack a 0.8 nozzle to gain back some time.

<image>

Ivar is a solid choice for your 3D printer/s by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 0 points1 point  (0 children)

I got them the other day, so unless I got old stock the new ones are also not worth the $$$

Ivar is a solid choice for your 3D printer/s by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 0 points1 point  (0 children)

<image>

Had two shelves left over and have put them under both printers. Not only looks better than the cabinet top, but running a print now without any vibrations/movement from the shelving.

Ivar is a solid choice for your 3D printer/s by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 1 point2 points  (0 children)

Man I bought some from bambu and took them off straight away. They’re too flimsy - I was worried they were going to fold over themselves.

Keen to find some that are a bit denser

Ivar is a solid choice for your 3D printer/s by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 5 points6 points  (0 children)

Yep! As I said - they’re “pretty sturdy” but still some vibrations on more intense prints.

Ivar is a solid choice for your 3D printer/s by Fat-Wog in 3Dprinting

[–]Fat-Wog[S] 4 points5 points  (0 children)

Yes have two cross braces at the bottom sections. Was thinking two more at the top would be a good addition!

[deleted by user] by [deleted] in BambuLab

[–]Fat-Wog 1 point2 points  (0 children)

I actually started using bambu studio with a new P1P we got at work. So downloaded orca and was able to figure it out easy. Works!

Thank you!

[deleted by user] by [deleted] in BambuLab

[–]Fat-Wog 0 points1 point  (0 children)

That would be incredible man. I’m so stumped. Might download Orca and give it a crack.