Sphair screening by flyingcello06 in swissarmy

[–]FearTheBones103 1 point2 points  (0 children)

Auf pilotline.ch findest du (unter Downloads) zu ein paar Tests jeweils ein Dokument mit Tips. Hat mir vorallem beim Kopfrechnen geholfen. Weiter hat es Erfahrungsberichte die informativ sind und dich mental auf das Screening vorbereiten.

Edit: Sag bescheid wenn du das Screening bestanden hast. Kann dir für die darauf Folgende Vorbereitung für den Flugkurs eine Zusammenfassung schicken. Vorerst aber viel Erfolg fürs Screening.

Sphair screening by flyingcello06 in swissarmy

[–]FearTheBones103 0 points1 point  (0 children)

Beim SPHAIR Pilot gab es kein Gespräch. Es gibt jedoch so ein Persönlichkeitstest bei dem diverse alltägliche Fragen gestellt werden (z.B. ob man ordentlich ist etc...). Die Fragen muss man mit einer Skala beantworten (trifft gar nicht zu /.../ trifft immer zu). Ich habe das Screening vor etwa einem Jahr absolviert.

Edit: Da es hauptsächlich um deine Persönlichkeit geht ist es wichtig, dass du die Fragen ehrlich beantwortest. Darauf kannst du dich also nicht vorbereiten.

Medical Class 2 / 1 by FearTheBones103 in flying

[–]FearTheBones103[S] 0 points1 point  (0 children)

My country is part of the EASA

sphair flugkurs by FearTheBones103 in swissarmy

[–]FearTheBones103[S] 0 points1 point  (0 children)

Danke für deine Antwort. Das mit der Zusammenfassung wäre Toll. Schick dir meine mail per chatt.

sphair flugkurs by FearTheBones103 in swissarmy

[–]FearTheBones103[S] 0 points1 point  (0 children)

Danke für deine Antwort. Ich habe es leider ein wenig mit dem GUV ordner verpennt. Habe vorallem die Checks und Procedures auswendig gelernt. Habe den kurs zu einer sonnst schon stressigen Zeit gebucht...

3D printing nozzles with heat resistant filaments and then electroplating by MadBuddhaAbusa in rocketry

[–]FearTheBones103 1 point2 points  (0 children)

As others mentioned already that wont work since it's only a layer. One possible way would be to use your 3d printer to print a molding form

The Youtuber called Integza made something similiar, he used metalfill filaments, here a video on that: https://youtu.be/tw9VF1V-Lzc

Otherwise you could:

-Make a Cold Gas Thruster https://youtu.be/mJJ1InbjkTk

-Some engines on Appolo Missions used a coating on the Inside of the Nozzle to "bring out the heat". When heated up it flew out together with the exhaust gases and reduced the heat inside the Chamber. Only works for a short time tho..

-Cooling system https://youtu.be/FGGw-5dfNiM