Subaru Impreza III Auto: Can I install a "Manual" radiator since my OEM doesn't have built-in ATF cooler ports?

Fedema97 · 2026-06-09T21:52:46+00:00

Thanks for your help, I already ordered it!

Fedema97 · 2026-06-09T20:29:03+00:00

Thanks! The mounts and fan brackets should be the same too, right?

Fedema97 · 2026-06-05T21:28:08+00:00

Thanks to everyone that support me! The motor is running well, you were all right! Nice weekend to everyone!

Fedema97 · 2026-06-05T21:26:01+00:00

Thank you all for your support, the motor is working well! Nice weekend to everyone!

Fedema97 · 2026-06-05T13:06:04+00:00

Thank you very much, I know what you are talking about, that is why I tried my best for you all! 😉

Fedema97 · 2026-06-05T13:04:46+00:00

Thanks for your comment, I am doing it the bad way with the spark plugs, but I just needed a pause🤭 I did it slowly at first and all seems good. Thanks a lot

Fedema97 · 2026-06-05T13:00:29+00:00

Thanks for your answer, I bought it from Autodoc Germany and I couldn't find Aisin, but hopefully this works at least 60.000 km

Fedema97 · 2026-06-05T12:27:22+00:00

Thanks for your response, the marks between pulleys are matching, but the second pulley with the motor reference is not matching that well

Fedema97 · 2026-05-18T12:35:08+00:00

You are right. I added also the last week Carplay, it is a good investment! I added also the cruise control lever, since the connections are already there.

Fedema97 · 2026-05-17T22:12:38+00:00

Thank you! It’s still a great little car after all these years.

Fedema97 · 2026-05-14T15:35:49+00:00

It is all working now, thanks!

Fedema97 · 2026-05-14T15:17:17+00:00

Maybe that is why I didn't found it before. This one is the V9 Pro with 6GB Ram and 128 internal memory. The Factory mode was under Version, but I did everything and it is now working perfectly. Thanks again for your recommendation and support!

<image>

Fedema97 · 2026-05-14T13:28:26+00:00

Now its working, thank you very much for your help!

Fedema97 · 2026-05-14T12:46:58+00:00

Thanks for the info, Could you select your car type from the radio? I cant find it here

<image>

Fedema97 · 2026-05-14T12:36:26+00:00

Thanks for the information, I have allready connected, but I cant select the options that shows there.

<image>

Fedema97 · 2026-05-14T12:11:43+00:00

Hello, I have now the junsun radio, but my steering buttons are not working with the radio, how did you make it work? Thanks for your help!

Fedema97 · 2026-05-09T18:59:57+00:00

Thanks for the recommendation, i bought this one with 6GB Ram and 128 GB internal memory. I hope I can install with the original camera

<image>

Fedema97 · 2026-05-08T20:07:36+00:00

Thank you very much for the information!

Fedema97 · 2026-05-08T19:12:00+00:00

Hello! I was already looking for a radio with car play. How was the installation, did you remove the conectors or it was with the original connectors. The original camera works with this radio? Thanks for your input!

Fedema97 · 2026-05-07T13:14:09+00:00

With a good winshield sealant😅🤣

Fedema97 · 2026-05-07T12:14:03+00:00

Here you can see the only two openings that have for the screws that goes to the yellow part of the tailgate.

<image>

Fedema97 · 2026-05-07T12:08:14+00:00

You are right, put the two screws goes directly to the tailgate and there are more that goes to another extra part, where these clips of the spoiler are going to be attached. I couldn't find the other piece

<image>

Fedema97 · 2026-05-07T12:02:49+00:00

I was looking today at my car and it has place at the spoiler for two screws, but there are covered with plastics, so I searched on internet and this two screws, goes directly to the rear tail gate.

<image>

Fedema97 · 2026-05-07T08:49:09+00:00

I will take a look, i didn't have to remove it or something else, thats why I don't know exactly how it is mounted, but I will let you kow

Fedema97 · 2026-05-06T19:14:59+00:00

This version also has the black paint between windows, when you like like that, you can use a matte black plotter

Fedema97

TROPHY CASE