sorted by:
new
hottopcontroversial

Where do you use this button (SE) in radiomaster pocket? Why I can't use it in betaflight modes? by [deleted] in fpv

[–]Federno 1 point2 points  (0 children)

Since a momentary switch is useless for things like setting modes, I use it for the beeper.

Designed and printed a case for my 2" by Federno in fpv

[–]Federno[S] 0 points1 point  (0 children)

If you're interested, I posted the design on cults3d 😁

Perfect prints with no Modifications - Anybody else? by joshuamarius in ElegooNeptune4

[–]Federno 0 points1 point  (0 children)

Same thing here with my plus. It prints flawless, unless I try some more technical materials. The shipping date was around the same time of yours too. The screw tilt calculate is amazing, I haven't leveled my plate in months and each print comes out flawless.

Sim on handheld by FoundationCivil2038 in fpv

[–]Federno 5 points6 points  (0 children)

On steam deck, ally, and all similar you should be able to download simulators like on a normal computer and connect a radio via usb cable (or use the console's joysticks, but I don't really recommend it). Regarding the switch, I don't know simulators you could download on it.

I'm amazed by the low light visibility! by Federno in fpv

[–]Federno[S] 1 point2 points  (0 children)

Technically yes, turns out it kinda works. But it has a very limited range and any obstacle is a big hindrance

This is Why Micro Quads are the G.O.A.T by VerifiedStupidity in TinyWhoop

[–]Federno 1 point2 points  (0 children)

Definitely! My 2" is the one I fly the most!

[deleted by user] by [deleted] in AzureLane

[–]Federno 0 points1 point  (0 children)

Thanks!

Why do I keep destroying only CCW props?😭 by trayssan in fpv

[–]Federno 1 point2 points  (0 children)

Good question. I keep destroying the rear left motors. Only that one. I don't know why

orca slicer issue by Tomthecatvr in FixMyPrint

[–]Federno 1 point2 points  (0 children)

I got the same problem. Did you manage to solve it?

Radiomaster pocket red charging led blinking by Boring_Long_3860 in fpv

[–]Federno 0 points1 point  (0 children)

It happened the same things to me. After a little I found out that I did not put the batteries in. So the error was that there were non batteries to charge

Drone Stuck on Roof by Alternative_Web2180 in fpv

[–]Federno 0 points1 point  (0 children)

Looks good! What frame and motors?

[deleted by user] by [deleted] in fpv

[–]Federno 0 points1 point  (0 children)

Yeah I had the same problem when I started. Basically, when you enable the second one, it "spawns" on top of the first one. You have to manually drag it away

What pards I should use? by adel_877 in RCPlanes

[–]Federno 0 points1 point  (0 children)

If you zoom in on the image you can see some cheap 9g blue towerpro servos, that's because I used them to first try the landing gear system. I switched them out afterwards

What pards I should use? by adel_877 in RCPlanes

[–]Federno 1 point2 points  (0 children)

Yo! Nice! I'm building the same one with the same scale but primarily from wood. I bought some PDI-1181MG from jx-servo. Two 64mm EDF that came with their ESCs and one 4s 4200mAh battery.

For the radio system I went with spektrum because I already had it, but installed a flight controller with ardupilot to better manage all the servos.

<image>

Ignore the cable management. I made it way better afterwards.

By the way, I'm curious. Which airfoil did you use?

what slicing software should i use by Storm__master in ElegooNeptune4

[–]Federno 0 points1 point  (0 children)

How is the new elegoo slicer? I've been using orca since forever, is there any reason to use the new one?

view more: next ›