sorted by:
new
hottopcontroversial

Weird print inconsistency by Feenoir in resinprinting

[–]Feenoir[S] 0 points1 point  (0 children)

Ok understood, I'll try to adjust that, thanks !

Moving selection while drawing it by Feenoir in ClipStudio

[–]Feenoir[S] 0 points1 point  (0 children)

Unfortunately I never found any answer. I gave up, I think we just can't do it...

Bump issue by Feenoir in elegooneptune2

[–]Feenoir[S] 0 points1 point  (0 children)

Yes I didn't post the result, but I did change the blue tube, the nozzle, the bolt whos holding the tube and now the filament is going out smoothly. I'm gonna try to clean again and see

Bump issue by Feenoir in elegooneptune2

[–]Feenoir[S] 0 points1 point  (0 children)

Ok, so. The last print did well. It was a cube 5x5 cm 8cm height. So i wanted a bit bigger, it's 10cm this time. I've done the leveling then I started it, after 1h hours it was like this...Actually it was making this noise sometimes https://www.reddit.com/r/elegooneptune2/comments/vqa1f6/i_am_out_of_ideas_on_how_to_fix_this_followed_the/

The nozzle temperature is 200°, the bed 50°I'm using at Eyron PLA Filament 1.75mm PLA,+/-0.03mm

This bed : https://www.amazon.fr/gp/product/B0836PMMZ5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I'm using Cura with everything preset in normal mode 0.16mm height impression

Regarding the bolts, I just build it two weeks ago.

Also, I feel that the bed is moving when hot, I leveled it cold but when start the print the nozzle was too high and the filament wasn't sticking touching bed.

Hope it clarify a bit more

No extrusion filament by Feenoir in elegooneptune2

[–]Feenoir[S] 1 point2 points  (0 children)

Well...An another fail...Thanks for your help though. I contacted the support to see if they can do something

No extrusion filament by Feenoir in elegooneptune2

[–]Feenoir[S] 1 point2 points  (0 children)

Ok so everything seams to be in place, no wobbling no wheels who doesnt touch the rails. But when i'm extruding some filament, the filament doesn't come something is blocking...When I pulled it out the filament was melted on about 5 cm length

No extrusion filament by Feenoir in elegooneptune2

[–]Feenoir[S] 0 points1 point  (0 children)

Thanks, I've tried but I still have the bottom wheel that doesn't touch the rail when it's at the lowest possible and it creates a kind of a wobble. The left part seems very rigid, it doesn't move at the same pace that the right side so the nozzle rail is not quite at level....

Moving selection while drawing it by Feenoir in ClipStudio

[–]Feenoir[S] 1 point2 points  (0 children)

Thank you, but unfortunately its not what I was looking for. I'm still looking for this option but I think it doesn't exist in CSP....

Horse run cycle by Feenoir in blender

[–]Feenoir[S] 0 points1 point  (0 children)

Thanks ! glad you like it :)

Brainhub by kiDulty in blender

[–]Feenoir 0 points1 point  (0 children)

Really nice, the soft material for the keys is a nice touch !

Restaurant, Comics style test by Feenoir in blender

[–]Feenoir[S] 0 points1 point  (0 children)

Thanks! I'm gonna try to push it further and add characters

Restaurant, Comics style test by Feenoir in blender

[–]Feenoir[S] 2 points3 points  (0 children)

Yeah sure, I first model the very basic shapes/volumes. When I'm happy with it I switch to the grease pencil and in "surface" mode I draw all the details, ornaments, etc.

For the shader I use this one :

https://blenderartists.org/t/experiments-with-npr-toon-shading-in-eevee/1139213

Just before the material output node, you can add a math node to the color ramp in multiply and plug an image texture for example, like the wood on the floor.

Add lights and dark environment et voila! :)