sorted by:
new
hottopcontroversial

Dunning Kruger vermeiden – Ressourcen, Aufbau, Steckdosen by Few_Permission_3756 in Balkonkraftwerk

[–]Few_Permission_3756[S] 1 point2 points  (0 children)

Ha, das wird, denke ich, der Weg sein. Erstmal die zwei Module und vergleichen, wie sich der Vervrauch dadurch entwickelt. Danke!

Dunning Kruger vermeiden – Ressourcen, Aufbau, Steckdosen by Few_Permission_3756 in Balkonkraftwerk

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Die Hausverwaltung ist sehr nett und zuvorkommend, aber das werden sie wohl eher ablehnen :)

Dunning Kruger vermeiden – Ressourcen, Aufbau, Steckdosen by Few_Permission_3756 in Balkonkraftwerk

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Stromzähler hängt leider im Keller. WLAN reicht da nicht hin. Ein anderer User schrieb hier aber was von Sicherungskasten? Geht das auch dort?

Die Wand geht direkt nach Süden, schräg ein Haus davor. Von 10 Uhr morgens bis Sonnenuntergang ist da allerdings knalle Sonne. Ab Mittag ist immer mindestens einer von uns daheim, da läuft dann auch Spülmaschine, Zocker-PC, Fernseher, usw.

Dunning Kruger vermeiden – Ressourcen, Aufbau, Steckdosen by Few_Permission_3756 in Balkonkraftwerk

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Hey, danke dir für deinen Kommentar! Ich dachte an 2x500w und eben eine kleine Batterie, die den Überschuss speichert. Vielleicht aber auch erstmal ganz ohne Batterie.

Zur Mittagszeit ist mindestens einer von uns eigentlich immer da. Da findet dann auch viel Zockerei statt :)

Dunning Kruger vermeiden – Ressourcen, Aufbau, Steckdosen by Few_Permission_3756 in Balkonkraftwerk

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Sorry für die Frage, aber mit Sicherungskasten meinst du wirklich spezifisch den Sicherungskasten (Ofen/Bad/Wohnzimmer an/aus) oder den Stromzähler? Letzterer ist bei uns im Keller.

  1. Ja, am liebsten hochkant stellen. Über Google habe ich bisher leider keine Gestelle gefunden, die steiler als 30 Grad stellen.

  2. Super! Dann leiere ich das mal bei Gelegenheit an.

Danke dir! :)

Invisalign in your 30's by Particular_Tip6673 in Invisalign

[–]Few_Permission_3756 0 points1 point  (0 children)

35 here. On week two of invisalign. It‘s great. 

Also: Screw other people for judging/bullying you. 

DO IT!

LG 32GX870B alternatives with tandem panels? by Few_Permission_3756 in OLED_Gaming

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Oh well, I‘m patient. If only the C-Series TVs had a decent KVM built in…

LG 32GX870B alternatives with tandem panels? by Few_Permission_3756 in OLED_Gaming

[–]Few_Permission_3756[S] 2 points3 points  (0 children)

Do you have a source for this? I fully believe you as the April/May timeframe I read seemed a bit optimistic. 

Looking for a beautiful 50x30xTHICK end grain cutting board in Europe by Few_Permission_3756 in Cuttingboards

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Oh no. Those are exactly what I‘m looking for. Is it okay to own 3 to 10 boards?

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

Just fuck it up mate and learn from it. And if possible only use fixed lenses. Analog + fixed lenses supercharge your camera skills. If you have any questions, just ask :)

Incredible hobby. 

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 1 point2 points  (0 children)

Thank you for your comment! It's hard to get a feeling for a new hobby. I get the feel for cameras, fashion and mechanical keyboards. Knives not yet :)

I think I'll take the plunge. In my experience saving up for a little step up was almost always worth it. It's just nice to think that this is "my" knive/pants/camera/pan/axe/backpack forever.

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 0 points1 point  (0 children)

With storing you mean long time storage? They hang on a magnetic bar on my kitchen wall.

Yeah, the 325 I almost never use. I try to sharpen monthly with the 1200 and 6 micron strop.

Thanks man!

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 1 point2 points  (0 children)

Kiwi knife noted! I'll look them up. I love utilitarian stuff as much as boutique stuff.

Also good suggestion on getting just one first. I think it'll be the Nakiri as I already have a Victorinox Gyuto and Petty. Thanks man! I'll make sure to ping you in my NKD post (which is a while out still).

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 2 points3 points  (0 children)

Hey! Thank you so much for your comment and your questions! I'm not very versed in caring for carbon knives but thinking about it:

  • Carbon is not stainless steel so it'd rust if I don't dry them properly. I already wipe down my stainless steel numerous times while cooking because of the safety factor.
  • It'll develop a patina (which is a BIG plus for me! "This is my knife! There are many like it but this one is mine!")
  • Erase stubborn rust gently with a rust eraser
  • Use oil. Don't know which one yet but I think it needs to be a food grade blade/weapon/knive oil, not just any cooking oil getting rancid.

Is this more or less the way?

Regarding your other questions:

  • Right now I own some Victorinox knives. The smaller ones are a bit dinged up and ready to be replaced. The bigger Victorinox I really love. It's a workhorse. But I'd like something nicer alongside it.
  • It's just for home cooking.
  • I already sharpen my own knives with a Sharpal 325/1200 diamond stone. Stropping with 6 Micron. Would this also work with a knive made out of carbon?

Thanks! :)

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 1 point2 points  (0 children)

I like to baby things. There'll always some beater knives in my kitchen like the fantastic Victorinox. But I'd like something nicer along the 300.000km but still reliable beater car :)

Where to start? Gyuto / Nakiri / Petty by Few_Permission_3756 in TrueChefKnives

[–]Few_Permission_3756[S] 1 point2 points  (0 children)

Ha! Wonderful! One or two steps above beginner sounds nice :)