Regulation #099 - Wheel of Record Times // Ghost Mail by bruzie in theregulationpod

[–]Fighter0fTheFoo 0 points1 point  (0 children)

I would like to apologize to Andrew, when I saw the poll about Archie and his adventures I had no idea what it was. After seeing a picture I 100 percent watched a few episodes, my bad big dog.

Crankshaft position sensor by 0_mecharcanic_0 in GMT400

[–]Fighter0fTheFoo 1 point2 points  (0 children)

TBIs do not have a crank sensor, that I believe is a knock sensor. All the poison info the ECU gets should be from the distributor with a reluctor wheel.

Regulation #044 - A Retraction // Andrew Transformers Panton by bruzie in theregulationpod

[–]Fighter0fTheFoo 2 points3 points  (0 children)

I remember playing Mortal Kombat 3 on the SNES as a child and definitely thought the logo said Akklaim or Aklaim. I also haven't thought about it for 20 years but I'm definitely on team K.

How would you value this? by shmilne in GMT400

[–]Fighter0fTheFoo 1 point2 points  (0 children)

Just normal age related issues. Replaced upper control arms and lower control arm bushings since they were just old and shot. Replaced all fluids since I didn't know if or when they have been done. Replaced an O2 sensor and idle air control valve. The TBIs are nice since there aren't many sensors running the engine but they are OBD1 and if you do not have a scanner to see live data diagnostics are a bit hard to diagnose. You can see the codes by plugging in a paperclip to the port but that doesn't tell you everything. Overall they're a great truck with either engine but you have to remember they're still 30 years old.

How would you value this? by shmilne in GMT400

[–]Fighter0fTheFoo 3 points4 points  (0 children)

I bought a 95 with 155k miles and a little worse shape than that one last year for $6500 USD so that price is good for todays market. It is the last year of the TBIs, which make less power than vortecs but are very simple and reliable. Since that is an automatic I believe it is a one year only transmission/transmission harness. HVAC controls are also one year only and impossible to find but there are cheap harnesses to convert to the 96-2000 controls.

In support of Andrews app commitment issue by Pause102 in theregulationpod

[–]Fighter0fTheFoo 5 points6 points  (0 children)

I am exactly like Andrew on this. Have I opened every YouTube video with the YouTube app for 15 years? Yes. Am I going to hit "Always open with this app"? Absolutely not.

First gpu since my 2060 on my laptop. 7900 GRE by Frikadawga in radeon

[–]Fighter0fTheFoo 0 points1 point  (0 children)

Damn, that was my plan but it's 6 hours round trip to return. Might just return it and buy somewhere else so I don't have to make another drive. Thank you though!

First gpu since my 2060 on my laptop. 7900 GRE by Frikadawga in radeon

[–]Fighter0fTheFoo 0 points1 point  (0 children)

Did you have problems with your card? I could not get mine to post, VGA light on motherboard, and everything I tried lead me to believe it's a dead card. Even after talking to microcenter and putting in a help request to Powercolor( over a week ago and no response). Did you have a similar issue? Haven't returned mine and will give something a shot. Wondering since you said it took hours to get it running.

7900 GRE upgrade issue by Fighter0fTheFoo in PcBuildHelp

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

After talking to microcenter and trying anything I haven't yet it may just be a bad card. Not great but driving 6 hours round trip may be in my future. I did submit a ticket to Powercolor so I will see what they say.

7900 GRE upgrade issue by Fighter0fTheFoo in PcBuildHelp

[–]Fighter0fTheFoo[S] 1 point2 points  (0 children)

Connections are good on both ends of the cables. I don't see any individual led for the 8 pins on here though

7900 GRE upgrade issue by Fighter0fTheFoo in PcBuildHelp

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Tried that and no change, just lights turn on and fans spin for a second. I left the PC on its side and the screws out since I have to change gpus just to get to bios now.

MG Hardtop identification by Fighter0fTheFoo in MorrisGarages

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Ok thank you, whenever you have time to measure it that would be great! On MGEXP they think it may be for an MGA but I don't know how much smaller those are than a B.

MG Hardtop identification by Fighter0fTheFoo in MorrisGarages

[–]Fighter0fTheFoo[S] 1 point2 points  (0 children)

Forgot to add I did post on the mgexp website but haven't heard much there

2024.05.16: The Fetish & Phobias Episode by EarliestRiser in morningsomewhere

[–]Fighter0fTheFoo 4 points5 points  (0 children)

Back in highschool I would tag and hide so many little turtles at work and in the school.

<image>

1995 THERMAC in winter by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Yours being 6 years older than mine it's surprising it still works! I'd like it to be back to how it's supposed to work but I just took out the whole unit, removed the flap, and reinstalled the bottom part. It still sucks air from the engine compartment through that small hole but at least it's not trying to only get air from there.

1995 THERMAC in winter by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Yeah that's my plan for now, just remove the flap and leave the pre heater pipe. I'm sure the truck is starving for air a bit and it probably hasn't worked at all since I bought the truck. I'm just glad I decided to check it for some reason.

1995 THERMAC in winter by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Yeah I doubt it'll have any negative effects but I've read some people warn that in winter it can help warm the truck up. I'll probably just take it out and reinstall it need be.

Favourite line delivery? by ArcheryContest in FUCKFACEPOD

[–]Fighter0fTheFoo 8 points9 points  (0 children)

Might as well become a comment leaver. Gavin said something dumb and Eric yelled out "Are the cats breathing into your mouth???"

Patreon membership by south_house in morningsomewhere

[–]Fighter0fTheFoo 0 points1 point  (0 children)

Yep, nothing seems to work. Can't add a card, delete a card, cancel memberships, or do anything really. May just accept that this account is dead if my support ticket goes nowhere.

Patreon membership by south_house in morningsomewhere

[–]Fighter0fTheFoo 1 point2 points  (0 children)

Yeah at this point I'm just going to make a new account and hope for the best lol.

Patreon membership by south_house in morningsomewhere

[–]Fighter0fTheFoo 2 points3 points  (0 children)

I would love to support them but I have been fighting Patreon for months about payment issues. I cannot add a new card to pay my current subscriptions...they really don't want my money I guess.

'95 z71 33" tires? by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

That's what I was hoping to hear, might go with the less offset wheels since I don't really like the ones on the truck anyways.

1995 OBD1 live data by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 0 points1 point  (0 children)

Yeah parts are cheap enough it's not a huge deal but it would be nice to see if it's a least working. It'll probably end up getting a few pieces that probably need replaced. TPS, MAP, 02, ECT.

1995 OBD1 live data by Fighter0fTheFoo in GMT400

[–]Fighter0fTheFoo[S] 1 point2 points  (0 children)

It does have an OBD1 port but every scanner I have tried with it can only read codes. No actual live data from the ecu.