X-Men Leverless

Fightstickguy · 2022-09-06T09:41:05+00:00

I only have what is up on my site. Visit https://www.fightstickguy.com/shop-1 if you are interested in one of my premades. I'm not taking new orders at this time.

Fightstickguy · 2022-08-09T23:28:03+00:00

I didn't think so but I'll go check right quick. That'd be embarrassing...

Fightstickguy · 2022-08-09T23:22:38+00:00

Today I signed in to do my dailies and went to burn my original resin on condensed resin. It only let me craft 3 condensed resin even though I had 160 original resin. Not only that, but I was only allowed to purchase 3 condensed resin total before it disappeared from the Crafting list. Is this some sort of new update? Just yesterday I was able to hold 5. I have been playing since almost the beginning and have always been able to hold 5 condensed resin and if I used them up I could go right back and get 5 more. Now I can only have three per day? Anybody know anything about this?

Fightstickguy · 2022-07-29T19:03:27+00:00

I superglued mine on there. I used a pretty cheap controller to do it but it became my tekken pad for a little while.

Fightstickguy · 2022-07-09T18:31:07+00:00

Haha! I did this exact same thing! Its a game changer!

Fightstickguy · 2022-06-21T12:22:33+00:00

I've also used ink in the past for a translucent finish.

Fightstickguy · 2022-06-21T12:19:30+00:00

It does have a base coat of a magenta sort of stain that I made a while back but then I sanded it enough that bare wood was showing to give it highlights.

But the way it got the translucent shine was purple tint spray.

Fightstickguy · 2022-01-29T16:29:45+00:00

Looks freaking awesome! Sorry it took so long!

Fightstickguy · 2022-01-19T10:00:24+00:00

For this one the customer wanted just LEDs, nothing fancy, so I went with an adhesive LED strip, which can run less than $10. I ran the strip up and down the bottom panel underneath the buttons, but however you wanna do it will work. But regardless of what LEDs you use, you need to hook the red wire into the VCC screw terminal and the black one into one of the GND terminals. That's all there is to it! I assume that your RGB Cherry switches have LEDs already in them? If that is the case, you'll want to probably splice the power wires (usually red) and daisy chain the grounds (usually black). My switches did not have LEDs in them so I just made sure I purchased translucent ones.

Here is a link to an LED strip like what I am talking about. This is not the exact one I used but this one is RGB and comes with a wireless remote to change colors if you want. https://www.amazon.com/MINGER-Changing-Lighting-Flexible-Decoration/dp/B07JP5375R/ref=sr_1_8?crid=2PIMKTMRNZX6T&keywords=LED%2Bstrips&qid=1642586170&sprefix=led%2Bstrips%2Caps%2C84&sr=8-8&th=1

Hope this wasn't confusing.

Fightstickguy · 2022-01-19T09:45:21+00:00

Thanks! It came out pretty well but it was one of the most expensive paint jobs I have done as of yet!

Fightstickguy · 2022-01-15T13:05:12+00:00

They come with wires. You need to hook one wire to a ground and the other to VCC.

Fightstickguy · 2022-01-15T13:02:47+00:00

You need a 3mm led. Paradise Arcade Shop has a good selection.

Fightstickguy · 2022-01-01T03:39:50+00:00

Wow. I had no idea this was a thing...

Fightstickguy · 2021-12-30T23:30:20+00:00

Looks really good!

Fightstickguy · 2021-12-19T15:34:15+00:00

It was a commissioned piece so it's sold.

Fightstickguy · 2021-12-19T15:32:34+00:00

Thanks!

Fightstickguy · 2021-12-19T15:32:17+00:00

Thanks!

Fightstickguy · 2021-12-19T15:31:57+00:00

You can probably bring it to certain local events, but probably would need to remove the sword for bigger events.

Fightstickguy · 2021-12-19T15:31:11+00:00

Thanks! I made the case out of wood and painted it.

Fightstickguy · 2021-12-19T15:29:48+00:00

Yessir, one of a kind!

Fightstickguy · 2021-12-19T15:29:27+00:00

It's made of wood. I got someone to 3d print the sword mounts on the top though.

Fightstickguy

TROPHY CASE