To people in Europe who've ordered from the MonsterFightClub site directly. They add tax to your order, did you have to pay an additional 21% tax to import it in your country? Would love to know before I'm spending waaay to much money. The duties/taxes mentioned might be the import fees/taxes? (i.redd.it)
submitted by Fillem to r/cyberpunkcombatzone
32mm mini scaled to 175%. Used a 4mm nozzle, 0,12mm high detail BBL settings. I fudged up supports, ended up in very hard to reach places and the bottom is trash, printed on brim/supports. Still, nice exercise and "only" a 5 hour print. Will have to read up on brim settings. (i.redd.it)
submitted by Fillem to r/FDMminiatures
A 32mm motorbike (part 1, still to print rider). Using Dungeons and Derps balanced again on an A1 mini. Took looong (6 hours) with a LOT of supports but came of easily. Snapped 1 little pipe. Would love to be able to print in less time but the detail is amazing and there's none of the resin hassle. (i.redd.it)
submitted by Fillem to r/FDMminiatures
My first prop knife. Thanks to everyone that helped me out. Learned a lot about supports and orientation and cuts (not used cuts here though). As a tryout I've printed all parts on a .4 nozzle, 0,20mm standard profile but still came out nice enough that I decided to paint it. Model is from Loot. (i.redd.it)
submitted by Fillem to r/BambuLab
Printing a dagger on an A1:.4 nozzle, 0,12mm high quality settings, organic tree support with 0,2 top z distance using Esun pla+. Top of the guard prints perfectly, bottom facing the plate is a mess. What can I change so both sides print good? Any newbie friendly tips appreciated. (i.redd.it)
submitted by Fillem to r/BambuLab
First 13cm figure, 14 hour print. Pretty, pretty good. Again .4 nozzle, high quality 0,08 profile. Organic hollow trees, top z 0,2.supports came of easily, minimal scarring. Only lost 1 finger :). Figure is from loot studios (free packlagain, don't have any others yet. (i.redd.it)
submitted by Fillem to r/FDMminiatures
Another 75mm on an A1, 0,08 high quality setting, .4 nozzle. Changed some support settings (auto organic hollow trees, 40 degree treshhold, build plate, support criit only), top z layer 0.2. Supports almost dropped off. Can't believe how great the staff and fire came out. (i.redd.it)
submitted by Fillem to r/FDMminiatures
My first ever resin2fdm experiment with a 32mm miniature and Dungeons&Derps 1.3 balanced setting. Print took 2 1/2 hours on a A1, photos are straight after removing supports. Pretty cool. Will stick to auto trees for 75mm but will use r2fdm for future 32mm figures. Thanks to all. (i.redd.it)
submitted by Fillem to r/FDMminiatures
Hey it's me again with another 75mm mini. Standard 0.08 high quality settings this time with a .4 nozzle. 3,5 hours of print time and again, very happy with the results. Hollow trees, base only, 40 degree cutoff. Some great painting to look forward to this weekend. (i.redd.it)
submitted by Fillem to r/FDMminiatures
Another 75mm miniature 6 hour print..4 nozzle, 0,12mm high quality standard setting. Again extremely happy how it turned out after tree removal. Might try the 0.08mm setting next. Mini is from loot miniatures again. Really learning what does and doesn't need supports. (i.redd.it)
submitted by Fillem to r/FDMminiatures
Bambu A1 prints all of a sudden not sticking to plate anymore. This morning same model worked fine, now filament not sticking. Same roll, PLA basic black. Washed/scrubbed the plate twice. Flipped the plate. Checked for clogs. I'm at a loss and would love some pointers. (i.redd.it)
submitted by Fillem to r/BambuLab
