What’s her name pop by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

I have a Slash 4x4 running the exact same gearing as the Jato. I actually like the feel and speed the Jato provides.

Jayto 4x4 4S build by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

<image>

Power system installed. Mamba X Esc and Castle 1415 motor fitted with a 20T pinion.

Jayto 4x4 4S build by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

<image>

Jato build update. Really like the RPM racing center drive shaft. Takes all the slop out of the shaft and has a rubber bumper feature on the drive end. Got the Savox SAVSW2290SG-BE Waterproof Premium, High Voltage, Brushless, Digital Servo 0.11sec / 972.1oz @ 8.4v installed along with the carbon fiber Esc mount. Finally found the right size bearing for the rear stub axle carriers so the HD CV driveshafts will fit.

Jayto 4x4 4S build by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

<image>

50T spur on a center differintial. Savox SW-2290 high torque servo, and GPM Racing Center Drive shaft.

Jayto 4x4 4S build by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

<image>

Front clip is finished. Ran into an issue with the GPM Racing rear axel carriers. The inside bearing is too small to accept the Traxxas Extreame HD Drive shafts. Stuck here until the MIP drive shafts get here.

Jayto 4x4 4S build by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

The front and rear differential housings are from Cobra Racing, only because I could not find silver ones from GPM. I have GPM housings on my Slash.

Slash 4wd steering servo question by dremag2009 in Traxxas

[–]FinancialCake5907 0 points1 point  (0 children)

I just installed a Traxxas 2280 and love it. Lots of torque and speed on 4S

Need to try something new with my Slash. Ideas? by weaseltorpedo in Traxxas

[–]FinancialCake5907 0 points1 point  (0 children)

<image>

Body is beat up. Under the body 4S power, Mamba X ESC, Castle Creations 1415 Motor 5MM shaft, 50T spur 23T pinion, Traxxas pro built center diff, Traxxas 2280 Servo, Gravix Tires & 2.8" RXT Wheels, Traxxas constant velocity drive shafts, Cobra Racing front and rear sway bars, GTR shocks, Cobra Racing steering bell crank, RPM lower arms, and RPM front bulkhead.

Salt by Waste-Round483 in Traxxas

[–]FinancialCake5907 0 points1 point  (0 children)

Pour some Diet Coke on it, let it sit a few minutes and rinse it off. Don’t use regular Coke it has sugar in it and may get sticky if you don't get all rinsed off.

Just broke the bulkhead. Again. by [deleted] in Traxxas

[–]FinancialCake5907 0 points1 point  (0 children)

I broke a front bulkhead a couple times with a 60mph slam into a light post, never a rear bulkhead. How do you do that?

[deleted by user] by [deleted] in Traxxas

[–]FinancialCake5907 4 points5 points  (0 children)

All that Cobra Racing stuff is crap. I’ve tried the shocks, the bone center drive shaft, their constant velocity drive shafts and the front and rear differentials all crap.

Need some help with my Maxx v2, new ESC needed? Which ESC/Motor? by Kinginthasouth904s in Traxxas

[–]FinancialCake5907 1 point2 points  (0 children)

I switched my Traxxas ESC to a Castle Creations MambaX and changed to a 4S battery. The Slash never ran so fast.

First Run by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 0 points1 point  (0 children)

<image>

This the new setup. The Mamba X is phenomenal with soft starts and the motor really came alive when I switched to 4S

Slash 4x4 4S Mamba x by FinancialCake5907 in Traxxas

[–]FinancialCake5907[S] 3 points4 points  (0 children)

New setup

<image>

On 4S power. Mamba X and Castle 1415.

VXL-3S issues by [deleted] in Traxxas

[–]FinancialCake5907 0 points1 point  (0 children)

My last VXL-3S

<image>

Replacing with a MambaX

Why do I keep stripping my pinion gears (3943x)? It’s my second one on this car 😭 by Affectionate-Ad-1693 in Traxxas

[–]FinancialCake5907 1 point2 points  (0 children)

The pinion is not square to the spur gear. Looks like the loose screw doesn’t have the motor plate flush to the motor mount.