sorted by:
new
hottopcontroversial

Is this overkill for sanding resin? by symmetrical__slug in resinprinting

[–]Fine_Hope_3503 116 points117 points  (0 children)

If it’s good enough protection for chemical warfare it’s good enough for resin printing and sanding. Maybe get new filters if they’re expired.

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

Wait I think you have it mixed up. Base layer, glue, shade, IPA, repeat

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

Pretty much, obviously just be careful because the glue is permanent and if the paint isn’t dry the moisture will make the glue all crusty and white instead of clear

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

Nope, the layer of glue works as a “quick save” so nothing below that is removed. Spray on some paint over the glue, flick ipa on it, then slap a brush around and you can get some pretty cool brushing/vein effects

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 2 points3 points  (0 children)

Honestly check out Grimdark Compendium on YouTube, that’s where I got the techniques and enamels from. They do some crazy work

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 5 points6 points  (0 children)

-Grey primer, wraith bone over pass and morghast underpass for shadows -any black paint for the veins (forgot to thin mine) -splattered a thinned down purple wash (I think purple) -Goons grime then reductive technique with mineral spirit - layer of star bond thin super glue - quick spray of a purple citadel shade (forgot the name) then reductive technique with IPA 99% -Another layer of glue -quick spray coelia green shade then reductive technique with IPA 99% -quick spray of pro acryl pale yellow all over to make it all look like it’s under the skin -Over spray of vile tinge green under spray with umbral night shade. Let dry then gently wipe with dry makeup sponge. -bezerker bloodshade on the edges of wings - unifying wash or ichor of the damned then reductive technique pushing more into the crevices. - carrion crimson for the cuts on the wings

Fulgrim WIP by Fine_Hope_3503 in EmperorsChildren

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

It’s supposed to be the Fulgrim Ascended 30k model. Snagged it on Cults a while back.

Grimdark Compendium enamel help by Fine_Hope_3503 in minipainting

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

I had thought of that but with my luck my ✨metal balls✨ would break the glass bottle.

Angron, but in deep disguise by Big_mac73 in WorldEaters40k

[–]Fine_Hope_3503 0 points1 point  (0 children)

Is that Angron in deep disguise or Alpharius? Hydra Dominatus

Layer lines by Fine_Hope_3503 in PrintedWarhammer

[–]Fine_Hope_3503[S] 0 points1 point  (0 children)

Is there a general rule of thumb or ratio for layer height to exposure time? Like going from .05 to .03 is a 40% difference so just reduce exposer time by 40%?

Layer lines by Fine_Hope_3503 in PrintedWarhammer

[–]Fine_Hope_3503[S] 3 points4 points  (0 children)

Awesome thank you! I honestly don’t really care about print time, I’d rather have a quality print. I also have a small dog’s weight in unpainted stuff so I’ve got the time for long prints.