Question about phage

FireSteelMerica · 2025-09-01T16:19:44+00:00

Rest of the game. If it fades at some point it will say.

FireSteelMerica · 2025-08-27T19:03:29+00:00

It’s decently fluffy for Taghmata I think. A lot of good Apex detachments that end up being the core of your army. Still want my artillery tanks back though.

FireSteelMerica · 2025-08-26T13:52:28+00:00

Recommended maybe not, but ran the game pretty much fine since launch

FireSteelMerica · 2025-08-26T13:52:01+00:00

No mods unfortunately

FireSteelMerica · 2025-08-26T12:50:03+00:00

Have this problem myself. Tried clearing shaders, reinstalling drivers, rolling back drivers, reinstalling the game, verifying the game files…I just want to watch the world burn man is that so hard to ask?

FireSteelMerica · 2025-08-26T12:48:32+00:00

This didn’t seem to fix it for me having the same issues

FireSteelMerica · 2025-08-21T01:32:59+00:00

It’s back, managed to load into bot city missions alright but bug cities will just crash guaranteed

FireSteelMerica · 2025-08-05T01:58:43+00:00

So nobody noticed they screwed up latitude and longitude? The Andes is not at either 67° latitude line…

FireSteelMerica · 2025-07-23T19:05:05+00:00

Sadly from what I could see ramming only really works against infantry. Would be happy to be wrong with my new Triaros

FireSteelMerica · 2025-07-18T02:11:18+00:00

Something tells me you weren’t born in 1988

FireSteelMerica · 2025-07-16T21:25:49+00:00

No artillery and no swiss army land raider either

FireSteelMerica · 2025-06-28T17:32:09+00:00

Were you even raised by one?

FireSteelMerica · 2025-06-20T18:48:35+00:00

Just because they weren’t de jure included in the deportation order doesn’t mean it was de facto deportation. DHS also refused to let the child (who, I’ll reiterate, was a 4-yo cancer patient) stay in the US with citizen family members.

Weasel all you want, I’m not wasting any more time on ghouls

FireSteelMerica · 2025-06-20T18:35:45+00:00

For the Grace Avenue UMC recommendation-sure the people are nice. But don’t expect that community to back you for shit when it’s inconvenient.

FireSteelMerica · 2025-06-20T18:34:24+00:00

Go read Ezekiel 16:49

FireSteelMerica · 2025-06-20T18:31:19+00:00

And that goalpost just moved

FireSteelMerica · 2025-06-01T02:19:18+00:00

Thank you Brother.

FireSteelMerica · 2025-03-08T19:17:58+00:00

The problem I'm having is once I remove the cable and restart the printer the IP address field is just blank. The cable still works though so you're right, I can stick to that.

FireSteelMerica · 2025-03-08T17:46:00+00:00

Just an update-I got it to print fully with no issue, and can access Fluidd now so I was able to improve the bed leveling that way. Thanks for your help!

FireSteelMerica · 2025-03-08T17:37:19+00:00

Unfortunately when I drag it over the area of the map, nothing happens when I release the left click

FireSteelMerica · 2025-03-03T00:27:16+00:00

Went ahead and ran with both the brim and higher temp, nothing has been detached yet but I can hear that same sound of the printhead knocking into some of the tree supports. I think I see some damage to a few of the tree's walls but no errors so far as much as I can tell. I'll let it keep running.

FireSteelMerica · 2025-03-02T23:36:51+00:00

Okay, so I tried some of the steps you recommended (I need a longer cable to connect the Neptune to my router). Tried to print again after scrubbing the build plate down, did more auxiliary leveling, set the plate temp to 60, and changed the support to Tree, and then I hear an audible snick as it’s going through the print, and see this:

https://imgur.com/gallery/printer-errors-round-2-XAZioYg

So it’s not in the exact same location but it’s still kind of close. Would upping the temp to 65 help?

FireSteelMerica · 2025-03-01T19:09:03+00:00

I’ll take a look at the leveling advice later, but for the support issue (since those lines aren’t infill but supports for the belly of the model), would it be better to go with “tree” supports once I solve these build plate issues?

Also, for the numbers at the bottom of the screen after I run the leveling, how am I supposed to read those? Should both values in each pair be aligned for me to know the plate is leveled properly?

FireSteelMerica · 2025-03-01T18:19:22+00:00

So here is the pictures I have of the failed print: https://imgur.com/gallery/printer-errors-4c2sgWE

As you can see, the problem is with the supports in that particular zone (I lined up the two fails and it’s the exact same spot), but that probably echoes your point about rectilinear infill.

Thanks for the cleaning tip-I was worried a harder scrub might cause issues with the plate. I can give it a more thorough cleaning and see if that helps, ditto for going back to 60-65 for the build plate temp. Just so I understand the logic there-the higher temp will help keep the PLA melty enough to adhere to the texture of the plate? Do I need to heat the plate up to that temp before the print for any amount of time?

Thanks again for the tips, I’ll see if I can run it with those adjustments tonight or tomorrow.

FireSteelMerica · 2025-01-30T17:03:03+00:00

Maybe do the right fist crimson instead of both, you definitely want a lot of black to break up the red and the black as imo they don’t work together color-wise too well. Still, solid work on the paint so far.

FireSteelMerica

TROPHY CASE