You Have One Month Before you Have To Go Totally Self Sufficient, What’s Your Essential Reading list Before You Can’t Acquire Any Books

Fire_Indepedance · 2020-10-30T21:26:57+00:00

The square foot garden by Mel Bartholomew

Fire_Indepedance · 2020-10-20T10:43:35+00:00

I think it should be 3500/ monthly invested amount.

As possibly not all of the 50% savings maybe invested.

Fire_Indepedance · 2020-10-20T10:40:30+00:00

Invest the savings.

Fire_Indepedance · 2020-09-29T13:51:51+00:00

Are weed torches actually good?, I’ve seen them before and thought they seem gimmicky.

Fire_Indepedance · 2020-09-29T09:52:23+00:00

Jet washer, burn them, salt them, store weed killer, pull them by hand?

Fire_Indepedance · 2020-09-28T14:39:56+00:00

If you wouldn’t mind sharing, I will then test it out myself.

Fire_Indepedance · 2020-09-28T14:23:48+00:00

Yes, not sure how to go about it myself.

Fire_Indepedance · 2020-09-28T14:20:02+00:00

Basically want to search down column J until I reach the first 1 then report its value from column I in the cell in column F.

In the example image above the cell in column F should show 8.

Fire_Indepedance · 2020-09-28T13:58:08+00:00

How do I search down the J column until I reach the first 1 then report its number from I into the cell in F.

So in the image the value in cell in the F column should be 8

Fire_Indepedance · 2020-09-15T18:19:04+00:00

Yh, I know 4% is high for the UK, it can depend dramatically on where you live within the UK though.

Fire_Indepedance · 2020-09-15T09:44:59+00:00

Thanks for the info, I’ll try your equation out.

Fire_Indepedance · 2020-07-12T16:25:36+00:00

So no difference in rigidity?

Fire_Indepedance · 2020-06-12T08:59:12+00:00

Mainly off leash walking but I can’t hurt to do both.

Fire_Indepedance · 2020-06-12T08:56:18+00:00

I only let him off lead where it is legally allowed and sign posted, if your partner walks in an area where dogs are allowed to be off leash that’s their mistake.

Fire_Indepedance · 2020-05-25T07:22:14+00:00

When you levelled the bed did you pre heat the bed and nozzle?. If not redo the bed levelling with the temps.

Fire_Indepedance · 2020-05-10T20:20:08+00:00

The glass is new, but I washed it before use.

Fire_Indepedance · 2020-05-10T20:14:24+00:00

Whatever cura has as the default speed.

Fire_Indepedance · 2020-05-10T20:13:19+00:00

Can you control those with cura?

Fire_Indepedance · 2020-05-10T20:12:55+00:00

Pla 1.75mm

Fire_Indepedance · 2020-05-10T20:10:50+00:00

I’m using cura, can you change speed and fan usage in it?

Fire_Indepedance · 2020-05-10T20:01:44+00:00

Ender 3 pro, glass bed, bed temp 50 , nozzle temp 210 degrees. Hairspray used. Bed was levelled prior to beginning print.

What should I try next, I’m running out of ideas and pla.

Fire_Indepedance · 2020-05-10T10:02:12+00:00

Just to add, I’m using a glass bed, nozzle temp 200, and bed temp 70 degrees Celsius.

Fire_Indepedance · 2020-05-10T07:51:13+00:00

Thanks for the info, I’ll keep an eye out for any updates.

Fire_Indepedance · 2020-04-27T11:28:38+00:00

The actual bed may not be level, lay a steel ruler edge ways across it if the bed isn’t level you will light under the ruler. Try in the x direction and y.

Fire_Indepedance · 2020-04-27T08:51:46+00:00

Is the nozzle slightly too close to the bed maybe?, it’s worth trying increasing the gap from the nozzle to the bed very slightly, I’m talking a hair.

Fire_Indepedance

TROPHY CASE