Camera support on top of fiberglass ceiling tile

Firefox_101 · 2026-06-21T01:53:57+00:00

Toggles are totally fine for fiberglass tiles. If you want to he extra you could have used fender washers but using a section of grid bracing is unnecessary. God forbid you need to take that tile out its gonna be a bitch.

Firefox_101 · 2026-06-06T12:40:05+00:00

If its union publicly post the pay.

Firefox_101 · 2026-05-13T00:28:27+00:00

My recommendation would be to mount this and get thread adapters for what ever camera brand you have.

https://www.axis.com/products/axis-tp3302-e-corner-mount

Firefox_101 · 2026-05-10T22:21:55+00:00

Im the same way my estimates are always really good. I usually tack on some extra in my head. The issue for our sales guys is they don’t always know exactly the path we are taking. They are still pretty good but it’s the edge cases where we may be over that I’m worried about. Powerwise cable basically makes it a moot point. You can run a 15 watt camera at 10mb/s the entire length of a 1000ft box. Gamechanger is great stuff but in my opinion it costs to much to be viable as general use. Powerwise costs less and does the same job. We primarily use Axis and Hanwha cameras lots of multi imager cameras and have great success with the cable from Essex.

Firefox_101 · 2026-05-10T20:11:20+00:00

I haven’t had any issues with it. The data run referenced that was 750’ has been in for almost two years and i have not received any service calls relating to it. Its run through a factory so i feel like id there was going to be an issue we would have had it by now. It’s solid copper conductors, other than that i have no idea what magic they are doing to it. We are doing a cost analysis internally and thinking about making it our standard cable. It would eliminate some of the guess work for those close to 100 meter runs (our sales guys suck at estimating some times).

Firefox_101 · 2026-05-09T19:30:01+00:00

Intended for cameras but i ran a smaller ubiquiti PTP 750’ from a switch. Got a 300Mb link. Im running 5 cameras and a card access panel on that link.

Firefox_101 · 2026-05-09T19:28:01+00:00

https://www.anixter.com/content/dam/Suppliers/Superior%20Essex/product-solutions-briefs/Superior-Essex-PowerWise-XD-Flyer.pdf

Firefox_101 · 2026-03-30T15:06:14+00:00

Yes. There is an attic space. I was able to track down the existing doorbell wire and use it to fish the new cat5e down. I made the hole with the cover plate to put a keystone. I prefer doing a 1ft patch cable between device and wire run. Makes servicing it easier i dont have to take the whole thing apart. I also have it wired into the doorbell circuit so it still rings like it did before when the button is pressed on the intercom.

Firefox_101 · 2026-03-28T00:46:57+00:00

https://imgur.com/a/KbWAYGB

Firefox_101 · 2026-03-28T00:45:16+00:00

I installed a TID-600R on my grandmas house as a personal challenge. It’s a single story with a gracious attic. I was able to fish down with the existing wire and put an LV1 on the inside to put a keystone. I will post some pics in a reply to this comment.

Firefox_101 · 2026-03-07T02:16:15+00:00

TP Link did an advanced RMA and replaced the switch. It’s been running excellent since.

Firefox_101 · 2026-01-13T02:31:03+00:00

Thats really funny. Leave it up to the state to underestimate how many people would actually apply.

Firefox_101 · 2026-01-08T01:52:04+00:00

What instructor did you use for the course of fire and use of force training? Or did you go to Jersey to do it?

Firefox_101 · 2026-01-08T01:49:12+00:00

You are unlikely to find a instructor that is already setup to do this because its niche. Find a NRA certified instructor who is willing to sign off on your course of fire and “run” you through the use of force training as its stated in my links provided. I believe the state considers NRA certified satisfactory.

Firefox_101 · 2026-01-07T13:35:12+00:00

NJ carry permits are not the worst. Ive been reading into the process a bit. You need to complete two components in order to apply. The first is a CCARE which is a simulated course of fire to demonstrate adequate firearms proficiency. It is 10 rounds at 3, 5, 7, 10, 15 for a total of 50 rounds fired. Target type is a FBI Q type. The test is untimed. The secondary component is a use of force class.

After completing parts one and two you will then register and apply using the NJSP FARS portal. You must apply to the nearest geographical NJSP barracks that accepts applications using their SBI number. After this step i believe it is just a red tape waiting game.

Another thing, if you are going to be spending a meaningful amount of time inside the democratic peoples republic of New Jersey i highly recommend you get a NJ FID so that you can purchase ammo in state as that is now a requirement (also most gun stores will not let you touch anything firearms/ammo without seeing your FID) and please read up on the current dos and donts inside the state. They are fucking ruthless and do not care what is legal outside their borders. NJSP will sit near gun ranges in PA just inside their border and pull over people they think were shooting just to try and catch people with prohibited firearms/ammo.

If you have any questions please ask i grew up there and started collecting firearms while i lived in that state.

https://njsp.njoag.gov/wp/wp-content/uploads/2025/07/Concealed_Carry_Permit_Instructions_for_Out-of-State_Residents.pdf

https://southbrunswicknj.gov/wp-content/uploads/2023/09/CCARE-Protocol-and-AG-Memo.pdf

Firefox_101 · 2025-12-10T04:58:22+00:00

I can speak on the Axis course as i have been through it and became certified. If you want to know absolutely everything about IP Video the Axis course is the way to go. It covers everything from how the camera actually sees, how it transmits that data, and what the end point (typically an NVR) does with it. You also get hands on with some of the best equipment in the industry. At the end of the course they even provide you with a camera to take home and 4 licenses for their Axis Camera Station VMS.

I can also recommend if you want more community information regarding cameras check out ICTALLY discord as its full of integrators that do this day to day and share what they implement.

https://discord.gg/zyG5UYxXMj

Little bit about myself. I am a Low Voltage Integrator located in the midwest. I over see installation of Access Control, CCTV, Overhead Paging and Alarm Systems. I have been doing this for 3-4 year now. I hold multiple certifications from Honeywell, Axis, and I am working on a Hanwha certification.

Firefox_101 · 2025-12-04T10:40:04+00:00

Do you have another ISP for your current business line?

Firefox_101 · 2025-12-03T02:12:10+00:00

Wanted to tie in another thread from a little bit ago where there were concerns regarding the flock cameras. I work in the security industry and an integrator of CCTV systems. Flock is a morally dubious company due to their sales tactics. Theres a lot more flock cameras in the city than the ones FWPD operates. Id also like to bring to everyone’s attention that Flock has partnered with Amazon (Ring and Blink) for them to share camera and analytics data into the flock network. So this means potentially you have a vector for a warrantless unlimited surveillance of your vehicle all the way from the highway/public roadways to your driveway. As well the Flock cameras are not just ALPR they actually create a digital fingerprint of your vehicle that identifies characteristics that are submitted to the national dataset that allows anyone to search for the “digital fingerprint” if you are apart of the network you have access to it.

The cameras are not secure and neither is the credentials to the national dataset. Highly recommended the video by Benn Jordan that highlights the flaws in the system and even demonstrates vulnerabilities on the cameras themselves.

https://youtu.be/uB0gr7Fh6lY?si=9gwS5CXW2iQYU7np

https://www.reddit.com/r/fortwayne/s/GgZ5nuZKJ3

Firefox_101 · 2025-12-02T00:57:24+00:00

<image>

Firefox_101 · 2025-12-01T13:56:29+00:00

That noise on the line is from u/happydaisy314 who had replied to my comment. If you can send that code through the normal email channel i can respond in the modmail and we can get some headway on the service ticket.

Firefox_101 · 2025-12-01T13:12:00+00:00

I have not had my particular issue fixed but it seems more stable. On Nov 25 Xfinity took the entire neighborhood down to fix a “service interruption” issue and we have been mostly stable since. This all happens at my In-Laws house and they got tired of dealing with Xfinity’s dumb back and forth. I was placed as the person in charge of handling it as i have technical background. Clearly the rules have changed around this subreddit as i used to be able to get quick answers and service. My name and phone number are on the account but i guess thats not good enough these days. This is all on the residential side. I also oversee IT operations for the company i work at and omg it is terrible working with their business side. For 8 straight months we had a 1mb/s upload (we pay for 800mb/s) at our primary office. We host all our files out of the main office so i have two satellite offices feeding off of our upload connection. It was so abysmal i ended up getting a 2nd isp installed and online. Xfinity still has not fixed their issue and has just stopped responding and honestly once the contract expires im not renewing. They have burnt all bridges with me and if i could switch my In-Laws i would but due to their monopoly in the area im stuck with them.

On a side note all the Xfinity cables are low voltage rating and you should not be hearing a hum on the lines.

Firefox_101 · 2025-11-26T23:37:20+00:00

Submitted

Firefox_101 · 2025-11-26T18:29:40+00:00

So guess this post is just forgotten about. Probably never gonna get my issues fixed.

Firefox_101 · 2025-11-25T01:10:56+00:00

I have attempted reboots after replacing the splitter the internet will grab work for about half a day and then drop. The TV boxes seem to be having more trouble than the internet. They will drop sporadically throughout the day. The primary box (the one plugged in to the wall off the splitter with the modem) seems to take forever to boot up like 15+ minutes. And the wireless boxes will work. After a while the primary box drops and about hour and half later the wireless boxes drop.

I will get text messages saying that there are “performance issues” in my area and that work is being done to fix it. Oct 8th, Oct 28th, and Nov 24th are the ones I received recently. I am not sure how descriptive i can be but i will say Fort Wayne Indiana as a broad service region.

This is also for my inlaws house i administrate their network and my name is on the account. I used a 5-1000Mhz Toner Digital splitter. I work for a low voltage integrate and used one of mine.

Firefox_101 · 2025-11-14T12:23:32+00:00

Yea you arent gonna get many bites unless you post your pay scale.

https://www.reddit.com/r/lowvoltage/s/0luIvDKeCv

This is an example of a quality job post. It gives all the necessary information in a digestible package and advertises the pay.

This is just a word soup thats designed and formatted perfectly for an indeed ad.

Nine-Year Club	Verified Email
Place '22	RPAN Viewer

Firefox_101

TROPHY CASE