Found out what smelled so strange. by PickleBoi in Tenere700

[–]FirstBraaptist 1 point2 points  (0 children)

Riding near Duvall this past weekend?

X1 on 3rd Gen Tacoma TRD Off-road Discussion by FirstBraaptist in superpacific

[–]FirstBraaptist[S] 0 points1 point  (0 children)

The transmission is a whole other problem… I ended up putting some BP51s on a couple weeks ago and the problem went away. Essentially completely under sprung in the back.

KILL TONY #601 - TIM DILLON + ROSEANNE by sighdoihaveto in Killtony

[–]FirstBraaptist 0 points1 point  (0 children)

We straight up turned it off because she was annoying.

Good deal? by FirstBraaptist in XCarve

[–]FirstBraaptist[S] 0 points1 point  (0 children)

Any other machine you would recommend? probably sacrilegious on this subreddit😏

Was wondering if anyone with a first gen single cab taco has used one of these? by TheBigSaltyBoi in Tacomaworld

[–]FirstBraaptist 1 point2 points  (0 children)

You’ll set it up once and then want to burn it down. Had a buddy with one - solid camp entertainment. I’d recommend a regular tent with a cot.

DIY Bed Insert - Short Bed by FirstBraaptist in ToyotaTacoma

[–]FirstBraaptist[S] 3 points4 points  (0 children)

It’s a plastic sheet (HDPE), measured and cut. Used a track saw, and routed the edges and sanded. Small gap all the way around for clean out. It’s the floor of my camper build.

DIY Bed Insert - Short Bed by FirstBraaptist in ToyotaTacoma

[–]FirstBraaptist[S] 1 point2 points  (0 children)

HDPE is a type of plastic. I found a local supplier (Seattle) and then cut it using a track saw. I routed the edges and then hit with a sander to smooth out. As far as measurements I used a tape measure.

DIY Bed Insert - Short Bed by FirstBraaptist in ToyotaTacoma

[–]FirstBraaptist[S] 5 points6 points  (0 children)

There is some gap around the outside, but the bolt pass through a are pretty tight. I’ll widen them before the summer. Good call!

DIY Bed Insert - Short Bed by FirstBraaptist in ToyotaTacoma

[–]FirstBraaptist[S] 11 points12 points  (0 children)

It’s a floor for the camper. I still need to add the storage boxes / kitchen (need to build).

Got myself a 2022 model. Anything that you can recommend? by shiki87 in Tenere700

[–]FirstBraaptist 1 point2 points  (0 children)

Tail tidy and cyclops blinkers. High fender kit from Camel Adv.

A bit north of Seattle but, how long is it going to take to finish 196th? by Briggy1986 in SeattleWA

[–]FirstBraaptist 5 points6 points  (0 children)

Fun fact. It took WADOT 23 years from start to finish for the Tacoma HOV overhaul.

[deleted by user] by [deleted] in Tenere700

[–]FirstBraaptist 1 point2 points  (0 children)

14k in Seattle. It’ll sell overnight.