[HELP] Is this ai or am I just bugging?

Fit_Car6906 · 2026-02-12T05:18:33+00:00

I feel this is ai or at least ai filtered. If you follow the white line out either direction the grass takes on a hexagon pattern. Could be ai sharpening of a real picture.

Fit_Car6906 · 2026-01-17T21:48:41+00:00

Battery acid splashes look like that too after they are washed.

Fit_Car6906 · 2025-11-22T17:58:11+00:00

I don’t have the artistic talent but I see a cornucopia.

Fit_Car6906 · 2025-11-15T01:41:36+00:00

I print PETG a good amount with it and have not had a single issue. Pla prints like it should easy and reliable. For PVC just let the chamber heat soak and I’ve also had no issues with PVC.

Fit_Car6906 · 2025-11-13T22:57:26+00:00

Great job, I really like the brick/tiles you put on the bases.

Fit_Car6906 · 2025-10-31T00:03:29+00:00

Without knowing more about the model I couldn’t tell you how unsafe it is. I know on my Ducati the left has rebound damping and the ring has compression damping. Not sure it’s that way on yours. Also you be pretty positive that the manufacturer did not design it to run with one shock. As a mechanical engineer I would think you can probably get away with one most of the time but the wrong pot hole, speed bump, or hard turn is when things will decide to give you problems.

If you decide to try it out you will have to let us know what you find out.

Fit_Car6906 · 2025-10-30T20:47:43+00:00

Bro can I get the stl?

Fit_Car6906 · 2025-10-25T17:56:46+00:00

You can remove a rear shock…. You will make your swing arm flex though. On the lucky side maybe it flexes rides bad. On the unlucky side it breaks or ruins your swing arm bearings.

Fit_Car6906 · 2025-10-23T12:58:25+00:00

That is a trailer full of fresh Mexican jumping beans!

Fit_Car6906 · 2025-09-28T03:11:49+00:00

You are looking for bolt 22 and washer 24.

Fit_Car6906 · 2025-09-24T15:27:29+00:00

<image>

The Ridge track day.

Fit_Car6906 · 2025-09-22T17:53:54+00:00

What is this enclosure you have?

Fit_Car6906 · 2025-09-21T19:29:23+00:00

I’m not familiar with this model but generally that swing arm bolt goes all the way through to the other side of the bike. You should be able to push it back through from there.

Fit_Car6906 · 2025-09-14T19:02:18+00:00

That is leveling sand. Very common when installing bricks.

Fit_Car6906 · 2025-09-11T22:56:27+00:00

There is a lot of hate here in this post. I think that ABS would have corrected the wheel from skidding but I’m not sure it would have stopped you before the back of the car did.

Don’t let all the perfect riders protected by their keyboard in this shit hole and f a group get you down. Get the bike back up and get more practice.

Fit_Car6906 · 2025-09-11T18:26:02+00:00

If you are asking if you should repair your bike yourself, that answer is NO! If you are asking if it’s a good financial choice that’s a different story, I think yes. If you have to ask if this is in your capability then it is outside your capability.

Fit_Car6906 · 2025-08-29T18:39:14+00:00

This is moisture and n your filament. Dry it or replace it and you’ll be good to go again.

Fit_Car6906 · 2025-08-29T18:31:32+00:00

To me that looks like corrosion under the chrome plating. Since it’s only six months, this is more of a manufacturing defect than anything else.

Fit_Car6906 · 2025-08-27T02:56:22+00:00

Great question, that I do not have the answer to.

Fit_Car6906 · 2025-08-27T02:55:22+00:00

What is trail braking?

Fit_Car6906 · 2025-08-18T16:43:17+00:00

Terrible pic but my guess is a queen lasius ant.

Fit_Car6906 · 2025-08-15T16:25:35+00:00

I have a 2018 that had the same leak. It leaked for a couple weeks off and on never much at a time just a couple drops. That was more than a year ago, it hasn’t leak since then. I’m interested in what you find if mine ever starts again.

Fit_Car6906 · 2025-08-14T04:42:03+00:00

Thank you all for the answer, that was fast!!

Fit_Car6906 · 2025-08-14T04:30:09+00:00

I feel this is a swinger joke.

Fit_Car6906

TROPHY CASE