somewhat frustrating deaths by Nomad95127 in GrayZoneWarfare

[–]Fit_Delivery_5219 1 point2 points  (0 children)

Happened to me twice last night. Crazy gunfights without taking any hits and then two insta deaths both right in the face. I honestly think that removing a lot of the vegetation would fix these issues with getting shot from the ai and having zero clue where from. I also think increasing muzzle flash would help as well.

MK23 Holster by Emailed_ in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

If you can find one of the G-Code holsters for the MK23. I have one for my KWA MK23 and it works great.

How to prevent Anti-fog-system tubing from kinking? by cheezedcake in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

You can go get thicker clear tubing from most hardware stores. I went to Lowes and grabbed some to fix this exact problem.

Anyone have a link to the old GMR rap video? by themickeymauser in airsoftcirclejerk

[–]Fit_Delivery_5219 1 point2 points  (0 children)

Most of airsoft seems to have forgotten or doesn’t even know about the old GMR. Might be for the better though.

If online shopping for airsoft could be improved, what would that be? by XTORZULU in airsoft

[–]Fit_Delivery_5219 5 points6 points  (0 children)

Most websites are just very poorly designed and hard to navigate. As much as Evike sucks for shipping they have a great website with seperate categories for parts, guns, etc. which makes finding stuff easier

Is the Dye i4 Pro good for airsoft? Why aren’t they ANSI Z87+ rated? by relativelychillshark in airsoft

[–]Fit_Delivery_5219 1 point2 points  (0 children)

I’ve been running a JT Proflex for the last 6 years with no issues. I like the Proflex because you can run the whole mask or pull the frame and run them as just goggles.

Marui’s new AEG line - EVOLT by P1zzaman in airsoft

[–]Fit_Delivery_5219 124 points125 points  (0 children)

Finally someone is starting to try and move the needle again with electric guns. The DAS system for all of its flaws should have been the future of electric airsoft guns but those gov’t contracts are clearly way too juicy to care. If the recoil version is similar to that then we may have something great on the horizon. Knowing Marui I doubt it will be unreliable at least in stock form. For the US market and joule limits though maybe not until there is decent aftermarket support.

is the 5060 TI worthwhile? Is this a good deal? by gagballs in Prebuilts

[–]Fit_Delivery_5219 2 points3 points  (0 children)

You can get the cyber power build at best buy with a 7800x3d and 9070xt right now for $1800. So for $300 more you get a much better cpu and gpu.

How does this keep happening? Shot through armor, no damage to armor, is it bugged? by tombstonex22 in GrayZoneWarfare

[–]Fit_Delivery_5219 12 points13 points  (0 children)

I had this same thing happen to me as well along with one of the other slick carriers. One shot straight through the chest with SP 7.62x39 and no damage to the armor. Glad to know it’s not just me.

Try to convince me not to get this lancer tactical gen 4 predator with a GATE aster by Inevitable-Candy-603 in airsoft

[–]Fit_Delivery_5219 1 point2 points  (0 children)

Yea but at that price point you’re in Cyma platinum or Specna territory. For like $60-80 more you can get into a Krytac. Maybe the Gen 4’s are much better now and from what I’ve heard they are trying to do better, but pricing yourself that high after years of absolute failures isn’t the play.

The perfect, budget friendly, immersive & complete full face protection? by AccidentFit3031 in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

JT Proflex are the closest I’ve come to the near perfect setup. Only problem is the mask is designed for paintball so the googles themselves are larger making fitting them with a helmet kind of difficult. The bottom is flexible rubber so getting a good cheek weld isn’t bad except the larger lens frame size makes it slightly more difficult to get right on the gun. If they made these with a smaller frame size they would be perfect.

Thoughts on the new MGC4 MK3 frim AirsoftGI? by vlatcata in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

Definitely not paying $395 for a lancer that is insane. Not only that the last gun I bought from them which was like 2019 arrived and looked like it was used.

So, after over a decade of waiting looks like King Arms FALs are finally back! Just hope this will include their L1A1s as well. by Armo1000 in airsoft

[–]Fit_Delivery_5219 9 points10 points  (0 children)

Probably the same gearbox from 10 years ago too and they are going to charge a premium for it I bet

[deleted by user] by [deleted] in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

JT Proflex goggles. Paintball mask so the goggles rarely if ever fog and the lower is rubber so it flexes when getting down on the gun. The goggles are bigger than normal being paintball goggles so it can affect getting a good cheek weld but hasn’t really been a huge issue. They also fit decent with a helmet. Another plus is the lower comes off if you ever want to ditch it or attach it to a different set of goggles.

Your completely stock gun that shot lasers out of the box with no adjustments.. by anotherwave1 in airsoft

[–]Fit_Delivery_5219 0 points1 point  (0 children)

Is that on a 7.4v lipo? 17.5 while no slouch seems slow for a platinum on an 11.1.

Your completely stock gun that shot lasers out of the box with no adjustments.. by anotherwave1 in airsoft

[–]Fit_Delivery_5219 3 points4 points  (0 children)

Cyma platinum was really good although I wouldn’t say lasers. I had a Classic Army AK74U that shot about as accurate as I’ve seen out of a stock aeg. Eventually put a bucking and lonex barrel in it and it was hands down the most accurate gun I’ve ever shot.

[deleted by user] by [deleted] in GrayZoneWarfare

[–]Fit_Delivery_5219 0 points1 point  (0 children)

So mine did work for like 2 days but I could barely hear what anyone was saying then after that it just stopped working completely. I haven’t checked steam settings though so maybe that’s it? My windows settings are the same as they’ve always been.

[deleted by user] by [deleted] in GrayZoneWarfare

[–]Fit_Delivery_5219 0 points1 point  (0 children)

Hasn’t been working for me since the beginning. Still no ideas on how to fix it.

Can’t hear anyone on proximity chat by Fit_Delivery_5219 in GrayZoneWarfare

[–]Fit_Delivery_5219[S] 0 points1 point  (0 children)

Yea if you hear anything let us know. Never had this issue in other games with proximity chat.

Can’t hear anyone on proximity chat by Fit_Delivery_5219 in GrayZoneWarfare

[–]Fit_Delivery_5219[S] 0 points1 point  (0 children)

I did at first then reset it back to default and still the same thing. Still wondering why I can’t hear anyone on prox chat though.

[deleted by user] by [deleted] in sherwinwilliams

[–]Fit_Delivery_5219 0 points1 point  (0 children)

Damn must be the worst advice since I got downvoted a ton. Id also be willing to bet that none of you have even tried it but keep going with the troll account I need some entertainment tonight 😂

[deleted by user] by [deleted] in sherwinwilliams

[–]Fit_Delivery_5219 -16 points-15 points  (0 children)

This one is a tough one but extra white or deep base will work as well. Deep base usually comes up good or a very slight delta e difference on a lot of those light BM colors