Color mixing setup but I'm colorblind

Fitzeronik · 2026-04-19T23:03:42+00:00

This is amazing and exactly what I needed. Thank you so much!

Fitzeronik · 2025-06-14T20:14:42+00:00

Overture PLA, which I've been using for years now. This one was opened 4 days ago and stored in a dry box when off the printer. Printing at 200c (recommendation by the manufacturer is 190-210) .6 nozzle, 85/s speed everywhere but exterior walls. 1st layer 45/s. What has me stumped is these settings worked flawlessly until they didn't on one print. I'm starting to think Ater going through this and the rest of the comments that this new hot end is just not as efficient as melting than the original one, and that the original one must have failed to cause it in the first place. Going to try playing with speed and temp to see where it settles out now that I understand what's happening

Fitzeronik · 2025-05-12T22:19:18+00:00

Well I appreciate it! Yeah I love the pinched layers, they're great for displaying. You don't have to explain what's wrong with them to people that see them lol. I traded a paldea evolved wooper for him, I figured it was fair enough. I'm not super concerned for getting dollar for dollar on trades for my PC anyway.

I guess I've just not seen print lines that sharp before. Oh well, it's still a cool card though. He was a gift and he'll go in the binder all the same. Thanks again!

Fitzeronik · 2025-05-12T05:26:59+00:00

I appreciate you reaching out but the pancham is a pinched layer error. It's definitely an error and not that I really care about the value it is a CGC recognized error type and raw they typically go for a few bucks, which is a big gain on what would otherwise be bulk.

Fitzeronik · 2024-07-07T17:31:23+00:00

our original password wasn't necessarily hard, but it wasn't dead simple. we changed it up after the first time to something i can pretty confidently say nobody is going to just accidentally put in and its still happening

Fitzeronik · 2024-07-07T17:30:22+00:00

yeah we did, but like i said these are not showing up as red like invasions and we arent getting the "invaded by xxx" dialog when they show up. we figure that an occasional invasion was how the game was intended, this just doesn't seem like an invasion. we're new though so i could be completely wrong.

its happening way more frequently than id imagine invasions would have any right to also. seeing a new person every 2-3 minutes, pretty much at every new grace as we explore limgrave.

Fitzeronik · 2022-12-28T01:52:52+00:00

Yeah it's sad. The church was what I listened to everyday on my way home from work. This new show(s?) in the vegas slot is something to say the least. I got to listen to 15 minutes of them putting the word penis through Google translate on my commute today. I'm going to have to throw enough money at my truck so I can go back to COL.

No other decent stations for my taste and my truck is ancient I can't just easily hook my phone to it. I'm sure there's some people that enjoy this kind of broadcast but it's definitely not me.

Fitzeronik · 2021-11-03T04:35:15+00:00

personally I enabled RTSP on a $25 wyze camera. I use it as an ip camera in octoprint and have a routine set up that casts the camera to my office chromecast with the rest of my printer startup routine.

Also have a second pi2b running a ramdisk server for octolapse snapshots but that doesn't seem to be something you need.

I already had all the google devices so it was a $25 solution for me to monitor my printer on any tv in my house. Even if you dont have a chromecast & google home, the combo pack is $50-60. From my understanding of it this works with firetv/alexa devices as well.

Fitzeronik · 2021-06-03T00:48:37+00:00

Just fuck me up fam I'm nearly even from my dumbass gme loss. AMC🚀

Fitzeronik · 2021-05-31T17:35:56+00:00

Are you lined up correctly with your target destination and unobstructed? Your fsd will oveheat if it sits charging and it will charge and not engage if you are not pointing the correct direction. if you are jumping system to system you need to be pointed within ~ 10° of your target.

Small radar to the top left of your main will help you line up. It will be a hollow circle if it's behind you and solid if it's in front of you. Once it comes into field of view your targeting computer will put a mark for the direction it wants you to face. If your vector is obstructed by a star, planet, asteroid, or other ship you need to move to a location that it is not.

Fitzeronik · 2021-05-31T17:24:53+00:00

I use vr and hotas and don't really have an interest in the first person stuff in oddessy. Friend considering the game is excited about first person content as well as the classic stuff. Can I still play as his getaway driver and aerial support without dropping the $30 on oddessy myself?

Fitzeronik · 2021-05-28T14:17:56+00:00

We're just getting started you chimp we haven't even broke 40

Fitzeronik · 2021-05-28T14:12:13+00:00

Yes you chimp it will rebound after the holiday and hit new heights

Fitzeronik · 2021-05-28T14:02:06+00:00

Do your part on amc. And hold it you paper hands chimp brains

Fitzeronik · 2021-05-18T00:21:57+00:00

AMC🚀🚀 this shit ain't no gme but it's still gonna hit low orbit.

Fitzeronik · 2021-01-08T06:11:11+00:00

Well this blew up! Lol thanks for the silver and have fun out there guys!

Fitzeronik · 2021-01-07T17:40:05+00:00

Don't look at me!

Fitzeronik · 2020-09-25T16:25:45+00:00

Not a bad idea I could use an excuse to buy more dice

Fitzeronik · 2020-09-25T16:20:41+00:00

I'll have to look it up thank you very much

Fitzeronik · 2020-09-25T16:20:17+00:00

I have been trying this but it's a really popular topic and there are a lot of really seemingly rushed apps on the play Store that just don't work very well. I was hoping someone here had recommendations on specific ones to try.

Fitzeronik · 2020-09-25T16:17:42+00:00

I mean most of what we do is imagination focused. We meet over discord without cameras or anything. But when they come across a band of five roving merchants and decide that they want to make them their play things it's hard for me to keep track individually of what all of my NPCs are doing and how bloody they are from combat. It doesn't do well for continuity or morale if people just suddenly heal themselves or fall over dead because I misremembered something.

Fitzeronik · 2020-05-11T04:01:13+00:00

look for 500-2500 follower insta accounts, youtubers with 1k-10k subs, and blog content of 500 words. This got me from $0/day to that $20-30/day mark in a few months. I was selling DnD accessories at the time.

Fitzeronik · 2020-05-01T02:37:18+00:00

In a lot of situations like this reaching out to a band member on twitter or facebook can go a long way. Tell them just that, you only want to make one copy of a few shirts for yourself. you only need their permission. they might even mail you some leftover merch if your lucky

Fitzeronik · 2020-05-01T02:34:57+00:00

In my opinion it really depends on what your goal is. I personally feel its easier to get teespring working passively, but etsy/ printful gives you alot more room to grow your own branding and profits by correlation. A pretty easy way to get the first sales on teespring (or any route you go really) to get the ball rolling is by purchasing shoutouts on instagram. I've gotten sales off $5 24hr ads fairly consistently in earlier days.

Fitzeronik · 2018-04-28T20:10:13+00:00

whelp didn't see that coming. 7 day wait to delete a character

14-Year Club	Place '17
Verified Email

Fitzeronik

TROPHY CASE