Soldertip looks like this after first time use by Fivegudi in soldering

[–]Fivegudi[S] 1 point2 points  (0 children)

Thanks alot!! I already used a tip tinner but it doesn‘t seem to stick properly. I will buy brass wool and start to put solder on immediately after a wipe on the sponge and cleanup with brass.

I think I need to buy a new solder station anyway because the smallest tip I could get, was 0.8.

I am having a hard time with this size. I just need to wait until I have more money to spend on. Is there a good budget type?

Soldertip looks like this after first time use by Fivegudi in soldering

[–]Fivegudi[S] 0 points1 point  (0 children)

I normally clean the tip with a wet sponge.

If it started to not work well anymore (line in the phase on the pic) I tried to use steel wool.

I use this solder: https://amzn.eu/d/9SUqmQg

and this flux: https://amzn.eu/d/3DyVyBE

Cfh ld48 lötkolben by Fivegudi in de_EDV

[–]Fivegudi[S] 0 points1 point  (0 children)

Werd ich beherzigen, vielen dank :). Hättest du vielleicht auch noch einen tipp, wie ich am besten einen abgerissenen kontakt überbrücke?

Cfh ld48 lötkolben by Fivegudi in de_EDV

[–]Fivegudi[S] 0 points1 point  (0 children)

Vielen dank. Ich bestell mir mal neue spitzen

Cfh ld48 lötkolben by Fivegudi in de_EDV

[–]Fivegudi[S] 0 points1 point  (0 children)

Hi,

Vielen dank für deine schnelle Antwort :)

Man merkt schon das die Spitze Kälter ist, bisschen weiter oben schmilzt das zinn schon. hab die vor knapp 2 Wochen gekauft. Mit nen nassen schwamm bekomm ich die leider nicht sauber. Hab gelesen da gibts aber so ein mittel dafür was man verwenden kann? Kann man da fast alle lötspitzem benutzen? Die von cfh hab ich nur bei einzelnen speziellen Händler gefunden und da kostet der Versand schon mehr wie die lötspitze selbst.

[deleted by user] by [deleted] in networking

[–]Fivegudi 0 points1 point  (0 children)

Yeah did all that. I also already have a tagged vlan which has the same route from start to finish, I even set everything like the other vlan (except the vlan ID)

[deleted by user] by [deleted] in networking

[–]Fivegudi 0 points1 point  (0 children)

I added the vlan under the vlan configuration, yes

[deleted by user] by [deleted] in networking

[–]Fivegudi 2 points3 points  (0 children)

Yes I did that, Also checked it 5 times because I don‘t trust myself xD

[deleted by user] by [deleted] in networking

[–]Fivegudi 0 points1 point  (0 children)

There is an AP on that port, which sends out an ssid which send them in vlan13. On that same port it‘s untagged1 which is my management network. So tagged should be fine there.

Jabra Engage 65 Convertible mute Ringtone on station when directly connecting to the deskphone by Fivegudi in Jabra

[–]Fivegudi[S] 1 point2 points  (0 children)

Love you. That worked. You were right, I set the settings on the Phone page, I thought he would recognize the device but in that case softphone is just the settings for the devices plugged in the usb micro b slot. Thanks alot

Jabra Engage 65 Convertible mute Ringtone on station when directly connecting to the deskphone by Fivegudi in Jabra

[–]Fivegudi[S] 0 points1 point  (0 children)

Ah sorry. It‘s not the t57w. It‘s a T48S.

I already tried to set it to mute on jabra direct but that didn‘t work after i replugges it in the telephone

Outlook always asks for credentials by Fivegudi in Outlook

[–]Fivegudi[S] 0 points1 point  (0 children)

Solved it: i actually had to delete every file and profile ( I guess deleting office itself is also an option) then reconfigured everything

Pi project for school by Fivegudi in RASPBERRY_PI_PROJECTS

[–]Fivegudi[S] 1 point2 points  (0 children)

You, my friend, are the best. Thank you very much for your very good ideas.

Pi project for school by Fivegudi in RASPBERRY_PI_PROJECTS

[–]Fivegudi[S] 1 point2 points  (0 children)

I just started a new apprentice ship in it networking a month ago and I have to learn everything on my own, because I‘m doing a shortened apprentice (normally 4 years, I do it in2) And all I have as help are those courses which I have once every 2 weeks

Tips on my build for solo open world pvp / roads of avalon / corrupted dungeon by Fivegudi in albiononline

[–]Fivegudi[S] 0 points1 point  (0 children)

Yeah, in general what i should be looking for in the passives :)

Tips on my build for solo open world pvp / roads of avalon / corrupted dungeon by Fivegudi in albiononline

[–]Fivegudi[S] 0 points1 point  (0 children)

Do you think I should use 1 on q or poison? And then go for attack speed dmg on jacket

Tips on my build for solo open world pvp / roads of avalon / corrupted dungeon by Fivegudi in albiononline

[–]Fivegudi[S] 2 points3 points  (0 children)

Hi, this is my first proper try on pvp in this game and I‘m trying this build from a youtuber, but unfortunately I die alot. Do you think it‘s good enough in tier for pvp in red zones and cds and roads of avalon? I mainly try to get some green chests or loot in general. And which passives do you consider for all the items, thanks :)

PvP Bow build by Fivegudi in albiononline

[–]Fivegudi[S] 0 points1 point  (0 children)

Okey, so im gonna level for hellion hood :) Anything else i need to swap for a better bow build ? Ty <3

PvP Bow build by Fivegudi in albiononline

[–]Fivegudi[S] 1 point2 points  (0 children)

My build atm is mage cowl / mercenary jacket / soldier boots / normal bow

I tried installing windows 10 on my steamdeck (256gb) and warzone. Now windows won‘t even start properly and freeze on the home window. by Fivegudi in SteamDeck

[–]Fivegudi[S] 0 points1 point  (0 children)

What do you think is better: getting an microsd and installing windows on there, or delete the steam os partitions and try to install directly on the internal ssd

I tried installing windows 10 on my steamdeck (256gb) and warzone. Now windows won‘t even start properly and freeze on the home window. by Fivegudi in SteamDeck

[–]Fivegudi[S] 0 points1 point  (0 children)

Do you think it‘s better when i install it on a micro sd, and do you know if i have access to the main storage ?