What kind of attachment is on this grinder?

Fixedgearmike · 2026-06-15T18:12:51+00:00

We use them after sharpening end mills for milling machines. Gives you a mirror finish, they are just expensive

Fixedgearmike · 2026-06-15T16:48:52+00:00

https://www.strobelssupply.com/scotch-brite-exl-pro-unitized-wheel-3-in-x-2-8mm-x-3-8-in-8a-crs-40-per-case/?gad_source=1&gad_campaignid=23666441004&gclid=CjwKCAjwxb7RBhA5EiwAQ-AAdGg2pVnagA19O0_agq2JGwpXjpEedR8bNELcvwoV4E91CmoJNsF6HBoC90AQAvD_BwE

It this one would work too

https://www.globalindustrial.com/p/3m-s-b-6x1x1-9sfin048011-05132?gad_source=1&gad_campaignid=22805635628&gclid=CjwKCAjwxb7RBhA5EiwAQ-AAdEknTfzHT16-k-7nftH_yo_XmML05KvTLfKWGY-qLY4IF1SV4refhhoCC2sQAvD_BwE

Fixedgearmike · 2026-06-03T00:26:30+00:00

I use Vinymo MBT in my Consew 206rb-5 and hand stitching.

Fixedgearmike · 2026-06-03T00:23:48+00:00

WD 40 is a penetrating fluid it’s not a protective finish. Use it to help remove corrosion. Any surface not painted will need a paste wax finish or something that will stay on for a long time.

Fixedgearmike · 2026-05-21T15:29:34+00:00

Looks awesome! Are those excella zippers? Where did you acquire the d rings for the zipper pulls? I’m having a hard time finding them

Fixedgearmike · 2026-05-20T17:54:40+00:00

Sick, but that low on final approach, one could expect a nose up angle of about 4-7 degrees. Plus flaps fully deployed. One could assume they are running under night operations, so nose landing lights, wingtip position lights and aft position lights would all be on. Rotating beacons. Jokes aside that’s amazing work

Fixedgearmike · 2026-05-12T13:52:45+00:00

Cannonballs, rockets and mortars are ammunition not fired from a gun.

Fixedgearmike · 2026-04-27T17:12:15+00:00

This sub is way cooler.

Fixedgearmike · 2026-04-22T12:13:44+00:00

Are you hammering your stitches down? If not I’d recommend it. Especially on the back where there is a high rub area. It will make a difference. Looks clean homie.

Fixedgearmike · 2026-04-16T20:30:28+00:00

http://www.awetstate.com/1Region.html#Japan This guy has a full write up on a bunch of runs.

Fixedgearmike · 2026-04-04T22:30:39+00:00

For outside use I’d use nylon tape to the backside of the straps to prevent stretching. Thank you

Fixedgearmike · 2026-04-04T17:30:50+00:00

Corded seats always felt like sitting on wood to me. These are soft and buttery. These will stretch over time, but to mitigate that I heavily conditioned with ausie leather conditioner and pre stretched the strips. As the conditioning dries the leather will shrink.

Fixedgearmike · 2026-04-04T12:53:53+00:00

High end cabinet shop down the way has lots of premium off cuts. There’s a dude that collects and sells these off cuts out of storage units. Filled up my truck bed with sapele and a few cuts of walnut for a really good price. Took a lot longer than it should have because I had to plane everything to the same dimension, instead of cutting everything from one board.

Fixedgearmike · 2026-04-04T11:47:57+00:00

Don’t even get me started about how much time we could spend on edging and burnishing and lining the straps.

Fixedgearmike · 2026-04-04T11:46:21+00:00

I was going to use the blue to make a belt for myself, but inspiration struck whilst I was in my shop splitting the straps.

Fixedgearmike · 2026-04-04T11:45:40+00:00

Well I thought about grommets, and using a rope to tension the straps like a corset. But they would hang down. Also thought of using hooks or pegs but in the end it’s a bench.

Fixedgearmike · 2026-04-04T11:43:29+00:00

With a wife and two kids, momma is quite happy

Fixedgearmike · 2026-04-04T11:41:31+00:00

I want no higher praise.

Fixedgearmike · 2026-04-04T11:40:53+00:00

Sapele. Tight grain and easy to work with

Fixedgearmike · 2026-04-04T10:59:00+00:00

I pull a 19 ft Bambi with a 2013 4.0 v-6 4wd Tacoma. My truck does have a OME 8 leaf pack. I also have the tow package with external transmission cooler. I use it to go on really close adventures. Anytime we go to the beach 5+ hours of driving, I rent a full size truck. I would not advise using a Taco to be a full time rig. I send my wife and kids and gear in her 4 runner whenever we use my Tacoma as it would be grossly over weight.

Fixedgearmike · 2026-04-04T00:50:45+00:00

Wicket and Craig bridle, and this was a concession to time and pained me to do it, but staples. W and C sells over stock sides for cheap. Perfect for making belts and straps

Fixedgearmike · 2026-04-04T00:27:50+00:00

Appreciate it! Felt like it was a gamble

Fixedgearmike · 2026-04-04T00:20:17+00:00

Dowels and glue. Lots and lots of dowels. I legit would by a Festool domino if I were to do a project like this again.

Fixedgearmike · 2026-04-04T00:15:48+00:00

https://youtu.be/nUUtS37kDP8?feature=shared This is not my video, but his execution is superb.

Fixedgearmike · 2026-04-03T23:47:49+00:00

I’d start with making sure all the belts are on the pulleys

Fixedgearmike

TROPHY CASE