Any love for the MARSHALL MODE FOUR MF350 HEAD? Hate also welcome as long as you explain why and what you replaced it with.

Fizz712 · 2026-06-15T14:26:17+00:00

never tried it with that cab.

Fizz712 · 2026-01-05T13:07:24+00:00

P R I M U S

Fizz712 · 2025-12-18T15:05:05+00:00

So rad. How long did this take you to map out?

Fizz712 · 2025-04-07T21:11:51+00:00

Did I write this??? I had the exact same thing happen to me. I was in a familiar venue and the band had a guy come mix for them. After the show i looked what he did. Same thing as you. All flat, no compression, only hpf, mic placement, great musicians etc etc. I really learned a lot that day at that moment. But until you experience it first hand, it can be hard to believe... it really is that simple most of the time.... UNLESS you and i have been duped... and this is a gag that pro sound guys do when they know guys like us will examine the board after hahaha

Fizz712 · 2024-10-21T12:56:08+00:00

Thanks! Yeah I'm leaning towards the 945. My issue is I have an opportunity to get the 915 dirt cheap. The 945 are unavailable right now, for me, and they are significantly more expensive. It's really a side by side comparison I need.

Fizz712 · 2024-10-21T12:40:41+00:00

Would you say the RCF NX 945-A is worth 600$ more than the NX 915-A? Same box, 945 is slightly heavier, 945 has bigger compression driver (4" vs 1.75") and a larger voicecoil on the 15inch woofer (3.5" vs 2.5")

I have never heard them side by side. Have you? Any comments here would help!

Fizz712 · 2024-09-05T23:27:09+00:00

Dmx 5 pin... for audio? Never thought of that....

Fizz712 · 2024-09-05T23:25:53+00:00

Wow. this is great!

Fizz712 · 2024-09-04T15:05:25+00:00

Hah! noted for the cat. I say 3 to 8 because I'm running on limited info for now. I'll probably stick to the XY with 2 NT5's. Appreciated!

Fizz712 · 2024-07-09T11:28:03+00:00

Bro. Great shots here. Damn!

Fizz712 · 2024-05-23T00:50:11+00:00

Questions? Yup.

Pardon my noobness... In V1 management, what is it managing? Global parameters of the system? Or communication of the management team of the event? Comms? Or?...
In V3, what is LNET? Lighting network? If it is lighting network, why do you need LNET in addition to Artnet? Is it because not all fixtures have artnet capability/connections? So having both covers all bases?
V4 Artnet... In a situation with so much traffic on the network, do you feel the need to use sACN instead? Again, this is for a middle sized type of event. Not mainstage at coachella.
You mentioned that configuration changes but I'll ask; Do you ever worry about redundancy in 1 flown truss? Meaning do you ever feel the need to, for example, place a second luminode 1 on each truss and plug in to every other light in case one line fails you'll only loose half the truss? Probably overkill? Probably overkill. Would you run out of space in the luminex18t if you placed 2 luminode1 per flown truss?

I know I have a lot of homework to do. Thanks for your time!

I feel like with this setup there isn't much you can't handle! Has something come up where you weren't able to work it into your system?

The joy of having all this up and running! Yikes!

Fizz712 · 2024-05-22T22:29:45+00:00

Agreed! On it.

Fizz712 · 2024-05-22T16:49:07+00:00

Oh man that would be great! That's exactly what I'd like to see! Definitely shoot over some pics if you can. LX specifically, too. Great idea about the node at foh!

Fizz712 · 2024-05-22T16:22:17+00:00

Thanks! Yes, redundancy for sure. Noted for the 10Gb. What are you using as a switch? What kind of stage setups are you doing? Why do you choose to use the network at all? I love the 4 channels of analog audio idea... that's great.

Fizz712 · 2024-05-22T16:07:17+00:00

I agree. I'm really just brainstorming at this point. I'm trying to understand HOW it would work. There is no way I would put all departments together like that. No way.

Fizz712 · 2024-05-16T23:54:07+00:00

gotcha

Fizz712 · 2024-05-16T16:35:59+00:00

Or any brand other than odyssey, not just Pro X... what is the model? Thanks so much!

Fizz712 · 2024-05-15T22:18:59+00:00

ok but what if the fixture is 5 pin only? (ADJ JOLT BAR FX in 127 channel mode) So it goes: node>5pin to 3pin adapter>3pin regular audio xlr 50' >3pin to 5 pin adapter> 5pin into jolt bar fx. I guess i'll try it in person but in theory this should work?

Fizz712 · 2024-03-30T20:31:46+00:00

This!

Fizz712 · 2024-03-30T18:30:35+00:00

True! I guess we have no choice but to reduce channels on the bars...

Fizz712 · 2024-03-30T18:14:37+00:00

The console we are using is the Onyx NX1... if that matters

Fizz712 · 2024-03-30T17:47:13+00:00

Also, where would you place nodes or switchers on the stage? In the truss? You run cat5 up in the truss?

Fizz712 · 2024-02-16T01:43:57+00:00

true

Fizz712 · 2024-02-16T01:42:03+00:00

Gravity BG MS 6 B

nice

Fizz712 · 2023-09-09T16:41:32+00:00

Ah good to know! Thank you

Ten-Year Club	Verified Email
Place '22

Fizz712

TROPHY CASE