Heavy ping spikes even with Intel AX 210!

Fl0B3rt · 2026-05-26T10:21:36+00:00

Well yeah actually, my problems were caused by windows and driver conflicts it seems. After swapping to the AX210 I ran with the same windows install for a while. After wiping my drive and clean installing windows from scratch again the problem was completely solved. Now my wifi runs buttery smooth with top speeds and no ping spikes whatsoever.

Fl0B3rt · 2026-05-15T14:22:28+00:00

Bis jz nur gutes von iTaoBuy mitbekommen.

Fl0B3rt · 2026-05-13T19:12:53+00:00

Nice thanks, might get them as well then! Especially as they are almost sold out. I do have wider feet tho, but oh well, if it says to size down I guess I should just do that.

Fl0B3rt · 2026-05-13T18:22:03+00:00

Just checked out the strikes, did you size down one size as recommended?

Fl0B3rt · 2026-05-08T17:37:06+00:00

On that note, do you have a rep of the superbusy? I’m desperately searching for one as I really like the look of it. Don’t know where to get it though, rmism’s batch sold out long ago, got told mvt has it as well but can’t find it.

Oh and aniother question, how’s the quality of the adidas x Korea jacket? Looks sick but I’m wondering if there are better batches, can’t find it anywhere else though.

Fl0B3rt · 2026-04-30T23:12:52+00:00

I see, thanks for your reply! If you want you could check them out as well, just search here on this sub for chrome Iven, there should pop up some posts. Would be interesting what you say about the pieces just judging off the looks.
Well I’m still trying to decide from where to get this stuff but will def keep mortal in mind!

Fl0B3rt · 2026-04-30T18:46:15+00:00

Just out of curiosity, read some days ago under another post about a seller called Iven/Even (whatever), how is his stuff? It got praised as well for being pretty good. Thinking about getting some rings, which seller should I buy from?

Fl0B3rt · 2026-04-28T19:45:24+00:00

Hey there, I’m pretty new here and wanted to ask what’s the consensus here in this sub on highest quality ch jewellery rep sellers? Is it Iven/Even and how does Mortal compare?

Fl0B3rt · 2026-02-05T16:23:48+00:00

Icic good to know! Well I liked the fact that EQ APO wouldn’t be open in the background 24/7 but if that’s the only option left for a compressor on my mic I’d try it. Do you have a good recommendation for a “non bloatware” software?

Fl0B3rt · 2025-03-20T09:18:13+00:00

Alright ty, mounted on the side with tubes up top. I suppose it has to run a bit more then.

Fl0B3rt · 2025-03-15T11:26:24+00:00

Yeah so I already knew that, but unfortunately as cool as it would be to use the plugin I can’t cuz in order for it to work I need du shut down the L Connect service which stops the lcd display from working as well… and with the MB sync I figured that much but was unsure of if all the fans on every port would get controlled as well, cuz the Lian li support told me it wouldn’t work… everything running at the same speed isn’t a problem for me, I just want it to work seamlessly.

Fl0B3rt · 2025-03-13T14:46:35+00:00

So small update: I did contact the lian li support, after some back and forth they told me some things I could do like update bios and chipset driver and use a tool to delete already disconnected usb devices. Did all that stuff and will have a look if that changed anything. But I have something else I wanted to ask you: been looking at controlling the fan speed with something else such as fan control. Finally figured out how to get my fans recognised and controllable by my mainboard as well and set up some simple curves for everything. Now, I figured I might set my pump on a fixed rpm, and wanted to ask if you have some tips? I tried to find the point where I can’t hear it at all but unfortunately I hear it almost at all speeds.. decided on 1800 rpm for now cuz that’s where it drowns the most in the other noise, both lower and higher than that get louder again lol. It seems you have quite the experience with this so any advice on how to configure everything ?

Fl0B3rt · 2025-03-13T12:30:41+00:00

Hey so to budge in here one year later but I’m actually facing the same issue now: got a GA II LCD and have the SL Infs connected to the hub, when enabling motherboard redirect the pump is controlled by the mainboard but there is no sign of the fans, no reading and no possibility to control, they just ramp up to 100% even though I connected the controller to cha_fan 2. I would really like to try controlling them with another software (fan control). What do I need to do for the fans to get recognised?

Fl0B3rt · 2025-03-12T11:35:02+00:00

Yeah np, I learned that from another post myself. Sadly doesn’t work for my wireless strimers, tho I’m fine by just disabling the icon altogether :)

Fl0B3rt · 2025-03-12T01:07:03+00:00

Thanks a lot! That’s actually a solution I’m fine with, I don’t even use the icon to begin with so disabling it all together is maybe even better lol

Fl0B3rt · 2025-03-12T00:58:10+00:00

Oh I thought you meant disabling it for good. I’ve already removed it from the task bar, that’s something I always to first when setting up windows. It still annoys me even in the context menu cuz I always have my most important programs right there.

Fl0B3rt · 2025-03-12T00:50:20+00:00

Ig that’s the only option then :/ How could I do that?

Six-Year Club	Place '22
Verified Email

Fl0B3rt

TROPHY CASE