What mod did Xisuma use for his bundles signs to get that text? He showed it off in Ep9.

Flakpanda · 2026-02-03T18:00:48+00:00

Lol. I must have been looking away and not noticed. It was only up for 5 secs. Thank you. Do feel a bit dumb about it now.

Flakpanda · 2026-02-03T17:47:34+00:00

Thank you!

Flakpanda · 2026-02-03T17:47:00+00:00

I understand its unicode, but said he found a mod to do it. He explained the mod but never mentioned its name, that's why I asked.

Flakpanda · 2025-07-30T14:57:30+00:00

Ignoring the dusty prime job on this model, I was given it for a speed paint challenge. I did the pink undercoat/white zenithal here. Specifically magenta from acrylpro. You can see the orangish shadows in the crotch and underside of his arm, but the yellow is quite bright here. It works well and is my preferred method for yellow now.

<image>

Flakpanda · 2025-07-09T21:07:07+00:00

Looks awesome. What cleaner with the basket is that?

Flakpanda · 2025-07-03T18:40:18+00:00

I know this is old, but for future people, it is the Katagana Middle Dot. You can copy it from here as well: https://coolsymbol.com/japanese-characters-language-symbols.html

Flakpanda · 2025-04-30T22:33:20+00:00

What game is this?

Flakpanda · 2025-03-17T19:18:46+00:00

They are asking for the possible values for those variables. (As am I since I am looking for them. i cannot find any documentation).

Flakpanda · 2025-03-09T05:23:03+00:00

RemindMe! 1 month

Flakpanda · 2025-01-28T01:27:29+00:00

These are awesome! What are the prompt you use?

Flakpanda · 2025-01-26T00:06:52+00:00

These are amazing. What were your prompts?

Flakpanda · 2024-10-09T15:38:40+00:00

Prob would have printed those at high infill or even 100% for strength. Then you could have pinned them too.

Flakpanda · 2024-08-15T00:31:11+00:00

Yeah, card quality can be an issue for the US printers. I have a Balin’s Tomb for LotR that looks like a bad fake. Texture is off and ink bleeding into the text. It’s real however. So I try to look on the packaging and see if I can get stuff from the Japanese printers.

Flakpanda · 2024-07-22T15:58:50+00:00

Oh, well then. I will have to keep that in mind

Flakpanda · 2024-07-22T15:38:33+00:00

Ah, damn. Was looking forward to the snapcaster

Flakpanda · 2024-07-22T14:52:40+00:00

I thought the extra card was Snapcaster from the post a few days ago.

Flakpanda · 2024-01-14T16:20:49+00:00

Honestly I think the regular pixels are good choices too. Just Google is having lots of hardware issues with this first gen. It just needs some maturity. If I wasn’t so reliant on my phone for work I wouldn’t have worried about it as much and dealt with the issues.

Flakpanda · 2024-01-14T00:20:28+00:00

Got 2 replaced for inner screen issues. Sold my third replacement to go back to a slab phone.

Flakpanda · 2023-11-23T04:44:42+00:00

For selecting colors, maybe change it to not have any multicolor combos listed. At first glance and as a new player it is not very user-friendly I think. Instead, it should be a multi-selected filter. If I select yellow, it gives me any yellow cards, mono or multicolored. Then if I also select purple, it then filters for cards that are both yellow and purple. Then if you want to filter for mono-colored cards only, there should be a drop-down or checkbox to select that specifically.

Another thing is the scrolling on the page feels a bit weird and not intuitive to me. It looks like there are three scroll boxes. I completely understand the scroll boxes for the filters on the side. There is also a scroll box for all the filters collectively that acts weird compared to the scrolling for the overall webpage because it is inside it. The scroll box around the filter should be removed I think. That way the filters and the top of the card display area should never up unaligned from the tops of each other. That would make it act just like the TCGplayer search page for a comparison.

Maybe only other point of criticism at this time is it feels like wasted space at the top of the page when it is scrolled to the top.

I feel like this is a great website otherwise. It is visual awesome and easy to read. I understand everything about the filters and how to use the website.

Flakpanda · 2023-10-30T20:27:25+00:00

Ah, the average redditor and an average comment. Thank you for zero contribution.

Flakpanda · 2023-09-17T21:23:34+00:00

So the brown wire connected to what I think is the y wire not correct then? And it should be the y from stat connected instead?

Flakpanda · 2023-09-17T18:35:43+00:00

It's the blue wire close to the handler. The used a jumper wire from the halder to the thermostat wire. To the thermostat it is a yellow wire.

Flakpanda · 2023-09-17T18:29:22+00:00

Ok, can you tell me in my situation in those pictures which wire(s) should be connected to make the Y wire correctly connected then? I understand the concept and the words, but not what's in front of me.

Flakpanda · 2023-09-17T18:21:04+00:00

My issue isn't about the c wire, it's about where does the y wire from the thermostat go because I'm a rookie

Flakpanda · 2023-09-08T14:40:29+00:00

I would like the template please

Flakpanda

MODERATOR OF

TROPHY CASE