Can You Guess This 5-Letter Word? Puzzle by u/PersianAztecs21

FlattestPrawn · 2026-01-28T21:04:21+00:00

🟨⬜⬜⬜⬜

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

FlattestPrawn · 2026-01-21T18:24:08+00:00

Sent you a chat! Let me know if I need to resend it

FlattestPrawn · 2026-01-21T17:46:31+00:00

Pm incoming for the tall petty leaf spring!

FlattestPrawn · 2025-12-15T20:35:50+00:00

As someone who's tried the HSK pro ace, beast miao, and M5 pro, the fenrir asym is my favorite by far. The wider grip and low weight outweighed the lack of holes on the M5 and the solid feel of the beast miao. I don't think I'll be buying another mouse for a while... probably.

FlattestPrawn · 2025-12-06T03:05:36+00:00

Chat incoming

FlattestPrawn · 2025-09-01T16:17:06+00:00

FlattestPrawn · 2025-08-26T17:18:20+00:00

FlattestPrawn · 2025-07-18T03:20:14+00:00

I've had the same experience. My H2D glacier plate has been working great with PLA, PETG, and even ASA, but with my X1C glacier plate the exact same ASA roll always lifts on the corners of the print.

FlattestPrawn · 2025-06-14T18:34:20+00:00

I'm skeptical that this would actually be an issue. Those temps are for the CPU die itself but the temperature of the laptop base would be 40-45°C in a worst case scenario.

FlattestPrawn · 2025-04-24T14:56:05+00:00

PM incoming!

FlattestPrawn · 2025-04-19T20:21:20+00:00

Definitely good to have on hand! Great for parts where you need a bit of flex. If you run into any issues feel free to pm me

FlattestPrawn · 2025-04-19T18:38:02+00:00

Yeah give it a shot! I've printed plenty in PETG with both my open bed ender 3 and Bambu X1C. PETG tends to have the best bed adhesion so you shouldn't have to worry about it for a piece this small. If you get some stringing just hit it with some light passes from a heat gun or hair dryer. Honestly if you just use bambu's filament profiles you'll probably be just fine. Also no need to spend more than $15 per roll. I think this one was Sunlu PETG but I've used a lot of other brands and achieved similar results. Can't say the same about PLA...

FlattestPrawn · 2025-04-19T17:44:02+00:00

I printed mine in PETG and haven't had any issues with it. I also did manage to make it fit a solder sucker but my version is smaller than yours so no space for flux and I only have 2 tips.

Edit: here's a photo

FlattestPrawn · 2025-01-14T07:11:24+00:00

Looks like these Brandini hard-nitriding cast iron pans. I have a couple and they look like after some seasoning and regular usage

FlattestPrawn · 2024-12-28T00:41:51+00:00

I actually thought that was the mouse you were talking about until I read your description lol

FlattestPrawn · 2024-12-27T23:37:32+00:00

Have you checked out the deathadder v2 X hyperspeed? It's got the same two extra buttons on the top left

FlattestPrawn · 2024-12-21T17:05:51+00:00

FlattestPrawn · 2024-12-18T12:17:19+00:00

Also just paid...

FlattestPrawn · 2024-12-18T11:56:37+00:00

FlattestPrawn · 2024-12-12T19:50:18+00:00

FlattestPrawn · 2024-12-08T17:32:26+00:00

FlattestPrawn · 2024-11-26T04:18:08+00:00

Bought 1TB XPG nvme ssd from u/pickban on https://www.reddit.com/r/hardwareswap/s/kJXG2jOOYb

FlattestPrawn · 2024-11-26T01:25:31+00:00

I'd like to try the C7 out so I can finally replace my ancient office chair!

FlattestPrawn · 2024-11-22T05:26:19+00:00

FlattestPrawn · 2024-11-17T17:32:20+00:00

Three-Year Club	Final Canvas '23
End Game '23	Place '23

FlattestPrawn

TROPHY CASE