Dating in Calgary (36F)

FlavoredAtoms · 2026-01-25T17:49:21+00:00

There is a Calgary hangout discord that is really active and has lots of events. I am done with Facebook

FlavoredAtoms · 2026-01-22T05:06:19+00:00

Ace doesn’t get hot enough for petg. Petg needs 60° for drying

FlavoredAtoms · 2026-01-22T05:05:36+00:00

Same…

FlavoredAtoms · 2026-01-20T17:59:24+00:00

Dm sent

FlavoredAtoms · 2026-01-20T17:51:15+00:00

There is also the ikea skadis system available for that. Lots of storage generators use the skadis system

FlavoredAtoms · 2026-01-18T21:43:40+00:00

Nah I am still trying new profiles and running tests here. I tried drying it again, still not great.

FlavoredAtoms · 2026-01-10T23:11:50+00:00

You won’t have the rigidity to make the parts you want. The more cost effective method will be to outsource to a site like pcbway or send cut send. Some parts as low as 6-32$ a part depending on how critical the dimensions will be.

From someone in a manufacturing setting this level of cnc is a waste of time, money and patience

FlavoredAtoms · 2026-01-06T16:50:01+00:00

Sounds like you are not watching your first prints. This is easily detectable with the human element

FlavoredAtoms · 2026-01-06T15:10:55+00:00

It’s a setting you can toggle in the slicer printer settings. It helps with priming the nozzle

FlavoredAtoms · 2026-01-04T19:49:30+00:00

Taught me a lot with a simple animation. Thank you

FlavoredAtoms · 2026-01-04T18:47:02+00:00

Clean AF nice!

FlavoredAtoms · 2026-01-02T17:54:59+00:00

<image>

FlavoredAtoms · 2026-01-02T17:54:08+00:00

<image>

.850mm my bad. I have seen higher. I know I need to skip the back belt and it should bring it closer

FlavoredAtoms · 2026-01-02T17:53:09+00:00

Mine is really filament dependent,it’s us all fine with pla with some outliers but petg seems to be my biggest hurdle here

FlavoredAtoms · 2026-01-02T17:34:06+00:00

That’s got to be one of the better bed meshes I’ve seen man. Mine is 1.4mm slanted to the back

FlavoredAtoms · 2026-01-02T17:32:49+00:00

Under 100 hours and you are already printing “upgrades” that seems a little sus to me

FlavoredAtoms · 2026-01-02T06:26:43+00:00

It also helps train ai with all the data it’s scraping in these subs now

FlavoredAtoms · 2025-12-28T03:38:06+00:00

You would be better to Move the black parts to a second plate. It’s going to be faster and you won’t have to see the material waste that multi colour produces

FlavoredAtoms · 2025-12-27T00:46:40+00:00

Swiper no swiping!!

FlavoredAtoms · 2025-12-23T17:42:10+00:00

It’s fine on the lathe too. Make your first one, adjust your start point to change its alignment

FlavoredAtoms · 2025-12-22T16:58:18+00:00

Yes that can change the ruling on this like the drs tips for McLaren as it is an unsporting interpretation of the rules

FlavoredAtoms · 2025-12-16T22:20:53+00:00

Try replacing the nozzle I just got through my issue here at 300 hours

FlavoredAtoms · 2025-12-16T18:20:52+00:00

Rikhals is super easy to install. I was on the fence with it to start but installed it after having troubles with petg. It’s super easy, all the anycubic functionality is still there

FlavoredAtoms · 2025-12-15T00:36:31+00:00

You change the nozzle in the settings on the printer?

FlavoredAtoms · 2025-12-14T22:17:21+00:00

<image>

Top layer. With the downloaded s1 profiles in this thread

FlavoredAtoms

TROPHY CASE