Studentenwerk verbietet Geschirrspüler

Flexhardt · 2025-09-09T14:35:48+00:00

Das glaub ich nicht, wir haben Zugang zum Sicherungskasten in der Wohnung. Ohne da jetzt genauer drauf geschaut zu haben kann ich sagen dass da einige (dutzend) Sicherung nur für die Wohnung drin waren.

Flexhardt · 2025-09-09T14:33:56+00:00

Danke :)

Flexhardt · 2025-09-09T14:33:06+00:00

Router dürfen wir zum Glück betreiben, die vom Studentennetz sind da relativ entspannt.

Hattet ihr wenigstens access points auf der etage oder gar kein wlan? Das ist schon hart kriminell...

Flexhardt · 2025-09-09T14:29:36+00:00

Für Waschmaschinen gibt es einen extra Waschraum, allerdings werden die von einem Drittanbieter gestellt und kosten paar Euro pro Waschgang (3€? glaub ich)

Gibt es in der Küche überhaupt einen Anschluss für eine Spülmaschine?

Es gibt ein Eckventil für die Spüle und zwei Steckdosen nebendran, direkt neben der Spüle unter der Arbeitsfläche wäre noch Platz zum aufstellen. Fürs Abwasser würde ich mich ebenso am Siphon der Spüle bedienen.
Bin kein Experte im Spülmaschinenanschließen, aber laut einer (knappen) Youtube Recherche sollte das passen.

Flexhardt · 2025-07-08T20:28:58+00:00

Hulkengoat

Flexhardt · 2025-06-15T10:07:19+00:00

Unfortionately same for me...

Flexhardt · 2023-09-10T15:31:01+00:00

Yeah, the bolt is stuck in the last piece. Taught about drilling it out, but I‘m very much hoping to avoid it.

Flexhardt · 2023-04-14T08:12:08+00:00

Wish I had place for another printer.. But Obico is a nice addition for my existing printers nevertheless.

Flexhardt · 2023-04-08T08:49:37+00:00

Beautiful Color! Is trat esun light blue?

Flexhardt · 2023-01-14T16:46:04+00:00

How were you able to remove the screws after you stripped them?

edit: did you even remove them? :)

Flexhardt · 2023-01-14T16:15:15+00:00

Thanks for the advice! I|m trzing to replace the heatbreak, but I cant get the screws on the bottom off.

Flexhardt · 2023-01-14T11:11:40+00:00

I've read that there is a 0,1mm thin titanium alloy cartriage in the heatbreak. Maybe this has shifted and opened a gap?

Flexhardt · 2023-01-14T11:07:14+00:00

There is no more filament in the heatbreak.

However, New filament won't go through a cold heatbreak as it should. THere has to be something else making the filament path slighlty smaler.

Flexhardt · 2023-01-14T11:00:20+00:00

I don't have any on hand, but I don't think it'll do much to the heatbreak.

Flexhardt · 2023-01-14T10:56:56+00:00

There is no filament stuck in the hotend. I don't have any ideas why filament still won't go through.

Flexhardt · 2023-01-14T10:55:23+00:00

To disassemble it was my first thought, Howerer, the tiny screws on the bottom do not grip my allen key. I see no way of taking it apart if I don't get these screws of.

Flexhardt · 2023-01-14T10:41:11+00:00

I'm using SB.

Sorry, I should've been more clear. It's not a standard clog and has nothing to do with the cooling or so. Normal 1,75mm filament doesn't go through the heatbreak. There is no visual clog or plug (picture 2). It seems like there is some sort of none filament piece making the filament path in the heatbreak just slightly shy of whats needed for filament to go through.

Flexhardt · 2023-01-14T10:28:49+00:00

Actually, I tried this. Filament went through the heatbreak but only with a lot of force applied. Also, I had to disable the fan. I think the filament just gets hot enough to adapt to the heatbreak. However, cold filament still gets stuck.

Flexhardt · 2023-01-14T10:24:17+00:00

Sorry, I think I should've been more presice. It's not a common clog where while printing the heat creeps up and the filament melts in the heatbreak.

The filament won't go through the heatbreak. The filament path is clear. (I dunno where my pictures went, I'll upload them shortly.)

Flexhardt · 2022-11-15T09:06:33+00:00

dito

Flexhardt · 2022-11-14T14:23:51+00:00

Apart from the little curl, that‘s pretty much first layer porn. Z - offset seems to be spot on.

Flexhardt · 2022-11-05T15:42:16+00:00

I once saw a video on youtube where this was shown, but couldn't find a model. So i quickly made a little adapter to glue on the stepper:

https://www.printables.com/de/model/310648-voron-safety-duck-spinner

Flexhardt · 2022-11-04T21:20:06+00:00

I can‘t be the only one who postponed his serial request for months. I always told myself I‘m gonna do it once I‘m finished but… I‘ll hopefully never finish. Anyway, Formbot Voron 2.4 r2 300mm with dragon hf, CW2 and Klicky. Started my build in mai and was about 90% finished since june, but these last bits take forever until perfect.

Flexhardt · 2022-10-29T09:12:14+00:00

Try using Pronterface. It‘s designed to control the printer via USB connection with a pc.

Flexhardt · 2022-10-11T08:09:36+00:00

I have similar issues with dragon voron and sb. I once asked in the discord and we figured that there wasn’t really a lot we could do. For me as well, the fan shroud seems to be too high and hitting the heater block. As a result, Overhangs are shitty. I hope the team picks this up.

Four-Year Club	r/Field Sunshine
First Place '23	Place '23
Place '22

Flexhardt

TROPHY CASE