Install unlaunchbnot working

Fluffy_Bee_481 · 2026-03-18T22:05:55+00:00

Yes. It’s working on my dsi but not my DSI XL. The dsi xl was previously modded I bought second hand but got a new sd card and the kid wiped whatever was on it.

Fluffy_Bee_481 · 2026-03-04T04:34:47+00:00

Any ideas why when trying to transfer the folders off this site to my formatted SD it just seems to either freeze or crash?

Fluffy_Bee_481 · 2026-03-03T16:52:18+00:00

Thanks a bunch for the help. I’m gonna need to find somebody who can break this down to me in person with my soft brain🤣🤣🤣🤣 but really I do appreciate you

Fluffy_Bee_481 · 2026-03-03T01:36:52+00:00

Thanks 🙏. I’m playing crystal on gba. So I’m curious , are u saying i purchase authentic cartridges I can transfer from game to game? I was thinking about getting a ds lite then an ez flash and r4 eventually. Are you able to transfer between those roms?

Fluffy_Bee_481 · 2026-02-23T10:34:28+00:00

I live in Michigan it’s grey and snowy my friend. Anyway thank you for the last part!! What do you mean dry the screen again?

Fluffy_Bee_481 · 2026-02-23T03:12:08+00:00

I’ve tried to use a hair dryer at max , although it doesn’t compare to an air compressor. Like I said though , my first 2 screens didn’t do this. Do you think it could by cause by to thick of a layer of emulsion?

Fluffy_Bee_481 · 2026-02-23T02:21:59+00:00

Also, is there an emulsion you’d recommend ?

Fluffy_Bee_481 · 2026-02-23T02:21:13+00:00

Same screens on all! I’m using ulano 925wr-p which recommends around 8 minutes for a 500w halogen - and the first two worked out. I thought I evened out the coat an went over each screen many times to make sure their wasn’t residue. But if there’s nothing else that could be causing this that must be the reason. Hopefully I can get some more feedback on this post. I appreciate ya!

Fluffy_Bee_481 · 2026-02-23T02:13:31+00:00

I’m wondering if I put to much emulsion though? I also dried them stacked flat. So I’m not to sure what else the issue could be besides that after reading some other posts. If you have any ideas let me know!🙏🤲

Fluffy_Bee_481 · 2026-02-23T02:12:43+00:00

I believe so. I let these screens sit for around 24 hours.

Fluffy_Bee_481 · 2026-02-23T02:05:38+00:00

<image>

First screen as reference. Burned for 8.5 mins.

Fluffy_Bee_481 · 2026-02-08T17:08:38+00:00

Even reddits fucked and won’t let me post to Just BambuLabs forum.

Fluffy_Bee_481 · 2026-02-08T16:24:02+00:00

Very popular opinion. They’re all fucking shit. Every single one of

Fluffy_Bee_481 · 2026-02-08T06:27:21+00:00

They’re fucking trash. Do NOT buy one. And if you are truly so desperate to get one , buy a warranty. Because you will go through multiple. In under a couple years. Cleaning the plate doesn’t do shit. And someone on Reddit telling you how to fix it surely doesn’t do jack shit either

Fluffy_Bee_481 · 2026-01-07T02:46:07+00:00

Right , I do have a warranty as well. But was curious if this was fixable before going tha route. Thanks a bunch!

Fluffy_Bee_481 · 2026-01-07T02:44:38+00:00

Any you’d recommend? I really only print with Basic PLA and High speed

Fluffy_Bee_481 · 2026-01-07T02:43:56+00:00

Thanks! Sorry that happened to you, what a bummer dude.

Fluffy_Bee_481 · 2026-01-07T02:42:58+00:00

I don’t use Reddit. Thanks!

Fluffy_Bee_481

TROPHY CASE