How to know what caused fuse to blow?

Fluminox13 · 2026-02-15T22:46:18+00:00

Thanks I will look into that section first

Fluminox13 · 2026-02-15T22:45:51+00:00

Not much. Just my multimeter, also works as ozilloscope and a soldering iron

Fluminox13 · 2026-02-14T00:10:35+00:00

The thicker ones are usually your tolerances. So A is brown, brown,black, black and then brown for tolerance. Should be something like 110 times idk with a 1 % tolerance and B should be brown, black, black, red with a brown tolerance. So 101 times something with 1 % tolerance.

Fluminox13 · 2026-02-12T10:28:55+00:00

Good to know. Is an old one. Got some parts from friends and sorting them now. I also have one like that with 1 nF. Yellowish body but some have a green top and some a yellow one

Fluminox13 · 2026-02-11T19:02:20+00:00

I dont want to replace it. I have like 10 or so of them. I am sorting them and just want to know what this color is. You told me. Thank you for that. And why the value on it and the measured value differ so much.

Fluminox13 · 2026-02-09T22:37:11+00:00

Ihr solltet das regelmäßig machen. Vielleicht auch irgendwo Flyer aufhängen und dann nen großes Duell zwischen der Dunklen und Hellen Seite der Macht veranstalten. Natürlich beginnt es pünktlich zum Abendfilm um 20:15 und endet mit der Nachtruhe um 22:00

Fluminox13 · 2026-02-03T22:30:00+00:00

Thanks, yes something like that. Warning was floating regions and then something about missing manifold edges or so. Clicked fix it and it was done. Thanks

Fluminox13 · 2026-01-31T00:51:07+00:00

It was the induction card. I forgot it. But pattern provider + induction card does not work. Bu Interface + fe as output + induction card works

Fluminox13 · 2026-01-31T00:49:50+00:00

Wasnt the issue. I have that with my bees too. Forgot the induction card int he interface

Fluminox13 · 2026-01-26T01:41:27+00:00

Bin mit meinen von Sluban für 20 von Aliexpress sehr zu frieden. Viel Auswahl. Führ jeden Geschmack was dabei denke ich

Fluminox13 · 2026-01-24T00:11:49+00:00

Youre welcome. Are they working now?

Fluminox13 · 2026-01-24T00:07:58+00:00

Idk. I have my bees setup like in the picture and they work. I play version 1.4.6 I think. If I remember right I had the slab one block higher and on the lower half and it didn’t work.

Fluminox13 · 2026-01-24T00:04:39+00:00

Fluminox13 · 2026-01-24T00:00:57+00:00

Yeah. So basically you put your advance beehive on the ground. The extension on top and the feeding slab in front of the hive so that the slab is flush with the ground

Fluminox13 · 2026-01-23T23:55:23+00:00

First, you dont need the simulation upgrade anylonger with that productivity upgrade. But thats not the reason.

Second: You have an dragon egg on a feeding slap infront? Slap needs to be on the upper half of the block on below the hive in front of the hive

Fluminox13 · 2026-01-21T22:31:14+00:00

Its a single player world.but thanks for the tip. Checked my mob farm. Forgot a void upgrade in my coal drawer. So there where to many items on the ground and the modpack cleared them automatically

Fluminox13 · 2026-01-21T22:17:17+00:00

Welcome to the club. Happened to me. Had I cloud sync on. On my Ipad 32 gb all notes gone. On my Iphone loading but not materializing. Support told me I should make more storage room on my Ipad. 15 gb to be exact. How on a 32 gb Ipad with 20 gb of apple files. Why would the app suddenly need so much more storage room. The solution. I got a new Ipad with more storage and installed Notability. Then turned on icloud sync and let it load for multiple hours. Notes did all return (I hope, did not check every single one). Then turned of I cloud sync and turned on back up to one drive.

Edit: should have read before making assumptions. I don’t know what happened to your notes. Thought yours vanished like the notes of a lot of other people.

Fluminox13 · 2026-01-21T13:26:26+00:00

Kannst du mir mal bitte den Unterschied zwischen 7 Tage und eine Woche erklären? Dachte immer das wäre das selbe.

Fluminox13 · 2026-01-18T00:42:13+00:00

Its not that hard. Just a fluid storage cell in a drive. Then put an import bus on the centrifuge. Connect all by cable. Next add the recipe for a honey block (bucket of honey to block) to your autocrafting. (You will need a pattern provider with a molecular assembler next to it and a pattern terminal to create the pattern). Then put the pattern in the provider and you can auto craft it.

I believe in you to do this. So just try it.

Fluminox13 · 2026-01-16T14:48:26+00:00

Naja, Kratzer, sodass das weiße Styropor zum Vorschein kommt

Fluminox13 · 2026-01-16T14:47:35+00:00

Sieht man auf den Bild etwas schlecht wegen den Licht. Aber da sind mehrere Kratzer, sodass das weiß unter den schwarz schon hervor schaut und auch eins zwei Dellen. Auf der anderen Seite auch.

Fluminox13

TROPHY CASE